Table of Contents
Advertisement
Available languages
Available languages
Installation
Instructions
If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737)
or visit our website at: GEAppliances.com.
BEFORE YOU BEGIN
Read these instructions carefully and completely.
IMPORTANT
•
for local inspector's use.
IMPORTANT
•
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the consumer.
• Note to Consumer – Keep these instructions for
future reference.
• Product failure due to improper installation is not
covered under the Warranty.
WARNING
•
This appliance must be properly
grounded.
ATTENTION INSTALLER
•
ALL COOKTOPS MUST BE HARD WIRED
(DIRECT WIRED) INTO AN APPROVED
JUNCTION BOX. A "PLUG AND RECEPTACLE"
IS NOT PERMITTED ON THESE PRODUCTS.
• Proper installation is the responsibility of the
installer and product failure due to improper
installation is NOT covered under warranty.
PARTS INCLUDED
4 Screws
Foam Tape
(WB01X1137)
WB06K5042
30 and 36"
Electric Cooktop - Radiant
Excludes Down-Draft Models
— Save these instructions
— Observe all governing
2 Hold Down
Brackets
MATERIALS YOU WILL NEED
Junction Box
Wire Nuts
TOOLS NEEDED
Pencil
Phillips Head
Screwdriver
Ruler or Straightedge
Safety Glasses
CUTTING THE COUNTERTOP
If you are installing the cooktop in a solid surface
material such as granite, quartz or any other natural
or synthetic solid surface, we recommend that the
cutout be prepared by a professional cabinet or
countertop installer.
Cooktop cutouts in wood or wood-laminate
countertops may be able to be prepared using a
saber saw and electric drill.
90º or Straight
Squeeze Connector
for 1" Conduit
Saber Saw
1/8" Drill Bit & Electric or
Hand Drill
31-11072-1 04-17 GEA
Advertisement
Table of Contents
Related Manuals for GE JP3030D
Summary of Contents for GE JP3030D
-
Page 1: Installation Instructions
30 and 36” Installation Electric Cooktop - Radiant Instructions Excludes Down-Draft Models If you have questions, call GE Appliances at 800.GE.CARES (800.432.2737) or visit our website at: GEAppliances.com. BEFORE YOU BEGIN MATERIALS YOU WILL NEED Read these instructions carefully and completely. -
Page 2: Important Safety Instructions
Installation Instructions IMPORTANT SAFETY INSTRUCTIONS FOR YOUR SAFETY ELECTRICAL REQUIREMENTS • For Personal Safety, remove house fuse or open This appliance must be supplied with the proper circuit breaker before beginning installation. Failure voltage and frequency, and connected to an individual, to do so could result in serious injury or death. -
Page 3: Pre-Installation Checklist
Installation Instructions PRE-INSTALLATION CHECKLIST WARNING Installing cooktop in combination The electrical power to the with other products. cooktop supply line must be shut off while connections are being made. Failure to do so Both products must be installed according to could result in serious injury or death. -
Page 4: Preparing The Opening
5 9/16” installation of this cooktop. This kit may be ordered ZEU36RSJSS 36 1/8” 20 7/8” 3 9/16” 5 9/16” from your dealer or directly from GE Appliances at www.geappliances.com. * Depth at rear of cooktop at conduit location. 31-11072-1... -
Page 5: Vertical Clearance
Installation Instructions PREPARING THE OPENING (Cont) MINIMUM CLEARANCES TO VERTICAL CLEARANCE ADJACENT WALLS & CABINETS Allow 5” minimum 13” max. Depth vertical clearance from 1 1/2” min. (30”) and of unprotected 2” min. (36”) Clearance 8-1/4" the cooktop bottom (or overhead cabinets from cutout to nearest 5"... -
Page 6: Installing The Cooktop
Installation Instructions INSTALLING THE COOKTOP VERTICAL CLEARANCE ATTACH FOAM TAPE Install an approved junction box where it will be Apply the foam tape around the outer edge of the easily reached through the front of the cabinet where glass. Do not overlap the foam tape. the cooktop will be located. -
Page 7: Electrical Connections
You can order an alternate installation kit be shortened. WB01X24570 with wing nuts and brackets by calling 800.GE.CARES. See diagram for instructions. B With the cooktop in place, open the front of the Open the cabinet door. Install the second screw cabinet door. -
Page 8: Installation-Electrical Connections
Installation Instructions INSTALLATION—ELECTRICAL CONNECTIONS GROUNDING INSTRUCTIONS: The ground wire in the conduit is connected to the conductor branch circuit, if local codes permit, connect cooktop frame. Effective January 1, 1996, the National the ground connector lead of the cooktop to the branch Electrical Code will not permit grounding through neutral. - Page 9 Estufa eléctrica de Instrucciones 36” y 30” Radiante de instalación Excluye los Modelos de Flujo Descendente Ante cualquier duda, llame a GE Appliances al 800.GE.CARES (800.432.2737) o visite nuestro sitio Web en: GEAppliances.com ANTES DE COMENZAR NECESITARÁ LOS SIGUIENTES MATERIALES Lea estas instrucciones por completo y con cuidado.
-
Page 10: Instrucciones De Seguridad Importantes
Instrucciones de instalación INSTRUCCIONES DE SEGURIDAD IMPORTANTES PARA SU SEGURIDAD REQUISITOS ELÉCTRICOS • Para su seguridad personal, retire los fusibles de su Este aparato debe contar con el voltaje y frecuencia hogar o bien desconecte el cortacircuitos antes de adecuados, y deberá conectarse a un circuito derivado comenzar con la instalación. - Page 11 Instrucciones de instalación LISTA DE VERIFICACIÓN PREVIA A LA INSTALACIÓN ADVERTENCIA Instalación de la superficie de cocción La corriente eléctrica a la linea de en combinación con otros productos. abastecimiento de la estufa debe cortarse durante la realización de conexiones. El no hacerlo puede resultar Ambos productos deben ser instalados de acuerdo en una lesión seria o la muerte.
- Page 12 Este kit puede ser ordenado a su ZEU36RSJSS 36 1/8” 20 7/8” 3 9/16” 5 9/16” vendedor minorista o directamente a GE Appliances en www.geappliances.com. *Profundidad en la parte trasera de la superficie de cocción en la ubicación del conducto. 31-11072-1...
- Page 13 Instrucciones de instalación PREPARACIÓN DE LA ABERTURA (Cont) DESPEJES MÍNIMOS HASTA LAS ESPACIOS LIBRES VERTICALES PAREDES Y GABINETES ADYACENTES Deje un espacio vertical de Profundidad máxima Despeje mínimo de 1 ½” por lo menos 5” desde la de 13” de gabinetes (30”) y despeje mínimo de elevados desprotegidos 2”...
-
Page 14: Instalación De La Estufa
Instrucciones de instalación INSTALACIÓN DE LA ESTUFA INSTALACIÓN DE LA CAJA APLIQUE LA CINTA DE ESPUMA DE CONEXIONES Aplique la cinta de espuma alrededor del borde externo del Instale una caja de conexiones aprobada en un lugar de vidrio. No superponga la cinta de espuma. fácil acceso a través del frente del gabinete en donde pueda colocarse la estufa. -
Page 15: Conexiones Eléctricas
Usted puede ordenar un kit de instalación alternativa reducirse. WB01X24570 con tuercas mariposa y soportes llamando al 800.GE.CARES. Para acceder a instrucciones, consulte el Con la estufa colocada en su lugar, abra el frente de la diagrama. puerta del gabinete. - Page 16 Instrucciones de instalación INSTALACIÓN—CONEXIONES ELÉCTRICAS INSTRUCCIONES PARA DESCARGA A TIERRA: El cable de descarga a tierra en el conducto se conecta al de acuerdo con los códigos locales. Cuando conecte a un armazón de la estufa. A partir del 1 de enero de 1996, el Código circuito derivado de 3 conductores, si lo permiten los códigos Nacional sobre Electricidad no permitirá...