Table of Contents
Advertisement
3. Then automatically the software version of the user interface is displayed,
for example „2" „8" = version 28 and all LEDs / Displays are ON for 10 Sec.
There is no alarm history mode available.
4. Demo mode
By pressing the button "A" / „P" of one of the rear cooking zone you activate the demo mode, the
LED for Power function active is ON.
With activation of the demo mode the hob can be used like usual but without heater activation.
The deactivation of the demo mode is done in the same procedure as activating. The Led has to
be off.
New Demo Mode/ Service Mode/ Alarm menu control philosophy starting with
October 2007 production
To access the self-test/demo mode, press the buttons in the following order:
1.
The cooking zone is switched off. Press the main switch until the display goes dark.
2.
Press the "+" and "-" buttons of the zones (short beep) simultaneously for about 3 seconds.
3.
After 3 seconds, a "d" for demo mode appears in the timer display or in the hot plate display
(depending on the model).
You can change between demo mode "d", service mode "S" and alarm menu "E" using the timer
button or "A" button (depending on the model). if you do not select anything, the unit will switch off.
Demo Mode „d"
Activation: Press the "+" button of the left-hand cooking zone
Indication in the timer display or in the cooking zones display (depending on the model): "do"
You can use the unit as usual, but without heater activation.
To be able to use the unit normally, you have to carry out the following steps:
-
Repeat 1. to 3.; after 3 seconds, the timer display or the cooking zones display (depending on
the model) indicates a "do".
-
Deactivation: press the "+" button of the left-hand cooking zone
-
Indication in the timer display or in the cooking zones display (depending on the model): "d"
DGS-TDS
21.04.08
21
599 519 523 EN
Hide quick links:
Advertisement
Table of Contents
