Page 1
HDD/DVD RECORDER SERVICE MANUAL MODELS : RH178H/188H/1999H/HDR688X CAUTION BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL. P/NO : AFN30086042 APRIL,2006...
Page 2
CONTENTS SECTION 1 ..SUMMARY SECTION 2 ..CABINET & MAIN CHASSIS SECTION 3 ..ELECTRICAL SECTION 4 ..RS-01A LOADER PART SECTION 5 ..REPLACEMENT PARTS LIST...
SECTION 1 SUMMARY CONTENTS NEW FUNCTIONS OF HDD/DVD-RECORDER ..............1-2 PRODUCT SAFETY SERVICING GUIDELINES FOR VIDEO PRODUCTS ....1-3 SERVICING PRECAUTIONS ....................1-4 • General Servicing Precautions • Insulation Checking Prodedure • Electrostatically Sensitive Devices SERVICE INFORMATION FOR EEPROM IC SETTING ..........
NEW FUNCTIONS OF HDD/DVD-RECORDER • HDMI HDMI IS THE SPECIFICATION FOR THE HIGH-DEFINITION MULTIMEDIA INTERFACE. HDMI IS PROVID- ED FOR TRANSMITTING DIGITAL TELEVISION AUDIOVISUAL SIGNALS FROM HDD-DVD RECORDER TO TELEVISION SETS, OTHER VIDEO DISPLAYS. HDMI CAN CARRY HIGH QUALITY MULTI-CHANNEL AUDIO DATA AND CAN CARRY ALL STANDARD AND HIGH DEFINITION CONSUMER ELECTRONICS VIDEO FORMATS.
When servicing this product, under no circumstances should the original design be modified or altered without permission from LG Electronics Corporation. All components should be replaced only with types identical to those in the original circuit and their physical location, wiring and lead dress must conform to original layout upon completion of repairs.
SERVICING PRECAUTIONS CAUTION : Before servicing the HDD/DVD Recorder cov- Electrostatically Sensitive (ES) Devices ered by this service data and its supplements and addends, Some semiconductor (solid state) devices can be damaged read and follow the SAFETY PRECAUTIONS. NOTE : if easily by static electricity.
SERVICE INFORMATION FOR EEPROM IC SETTING MICOM START OPTION CONFIRMATION MODE DETECT NEW EEPROM (OPTION EDIT SCREEN) EEPROM ID CHECK MODEL NAME BINARY Press the "CLEAR" key on the 2 BYTE(B3,248,249) RH.S OPT1 00000000 Remote controller and the "CH - " OPT2 00000000 key one the Front Panel the same...
SPECIFICATIONS • GENERAL Power requirements AC 200-240V, 50/60 Hz Power consumption Dimensions (approx.) 430 X 54 X 275 mm (w x h x d) without foot Mass (approx.) 4.1 kg Operating temperature 5°C to 35°C Operating humidity 5 % to 90 % Television system PAL I, B/G, I/I, SECAM D/K, K1 color system Recording format...
Page 9
SECTION 2 CABINET & MAIN CHASSIS CONTENTS EXPLODED VIEWS ........................2-2 1. CABINET AND MAIN FRAME SECTION ................2-2 2. DECK MECHANISM SECTION(RS-01A) ................2-3 3. PACKING ACCESSORY SECTION ..................2-4...
Page 13
SECTION 3 ELECTRICAL CONTENTS HDR PART ELECTRICAL TROUBLESHOOTING GUIDE ........................3-2 1. POWER SUPPLY ON SMPS BOARD...........................3-2 2. POWER SUPPLY ON I/O BOARD ..........................3-4 3. SYSTEM CIRCUIT PART ..............................3-7 4. DISC NOT RECOGNIZED.............................3-7 5. WHEN PLAYING DISC, NO AUDIO OUTPUT ......................3-8 6.
HDR PART ELECTRICAL TROUBLESHOOTING GUIDE 1. POWER SUPPLY ON SMPS BOARD No 5.3VA Replace the F101 Is the F101 Normal? (Use the same Fuse) Is the BD101 Normal? Replace the BD101 Is the TH01 Normal? Replace the TH101 Is the Vcc (10V - 17V) Is the D102 normal? supplied to IC101 Pin6? Check or Replace the...
Page 15
No 5V for HDD & No 12V for HDD & DVD Drive DVD Drive Is there about 5.5V Check D125 and Is there about 13.5V Check D124 and at the IC156 pin1? Replace at the IC155 pin1? Replace Is there about 4V ~ 5V Check the ‘PWR CTL Is there about 4V ~ 5V Check the ‘PWR CTL...
2. POWER SUPPLY ON I/O BOARD No 12V No 5VT Is the VCC (14V) sup- Check D124 on SMPS Is the VCC (5.3V) sup- Check 5.3VA on plied to Q164 Collector? Board and Replace plied to Q155 Emitor? SMPS Board Is there about 12.5V at Check Q164 and Is there about 0V at D152...
Page 17
No 5.0VD No 3.3V Is there about 5.3V Check 5.3VA on Is there about 3.8V at Check or Replace at the IC153 pin 1? SMPS Board the IC152 pin1? the D127 Is there about 4V ~ 5V Check the ‘PWR CTL Is there about 4V~ 5V Check the ‘PWR CTL at the IC153 pin 4?
Page 18
No SW_12VG No SW_FD(+) Is the VCC (14V) sup- Check D124 on SMPS Is the VCC (FD+) sup- Check D121 on SMPS plied to Q165 Collector? Board and Replace plied to Q163 Collector ? Board and Replace Is there about 12.5V at Check Q165 and Is there about 5.3V at R184 Check Q163 and...
6. NO OPTICAL / DIGITAL OUTPUT R1107 : Is there a signal ? CHECK PVM01 pin 1 (SPDIF_OUT) : R851 : C856 : Is there a signal? Is there a signal ? CHECK BD817 : JK803 pin 2 (5.2V) Is there a signal ? CHECK JK803 &...
7. NO TUNER AUDIO OUTPUT TU701 pin 16 (SIF) : Is there a signal? C928,C963 : Is there a signal? IC903,904 pin 7 : CHECK IC903,904 pin 6 (12V) Is there a signal? CHECK IC803 pin 20, 24, 23, 27 IC 803 pin 2,4 (VCC) : 12V Replace IC803 Is there a signal?
9. NO RGB / COMPONENT VIDEO SIGNAL WHEN PLAY DISC R1153,R1154,R1155 : Is there a signal ? PVM01 pin 2,6,10 : Is there a signal ? IC802 pin 18,21,24 : CHECK IC802 pin Is there a signal? 1,16 (5.2V) CHECK SW801 status & Replace IC802 SW801 pin 2 (RGB_SEL”H”) 10.
11. NO TV, EXTERNAL INPUT VIDEO SIGNAL No video signal of external No video signal of external When Cable connecting Tuner and Rear input AV3 (Rear RCA input) input AV4(Composite/S-Video) SCART1,2 No TV video signal (AV1/2) CHECK Cable con- nection & Input signal C618 : Is there a C917,C923,C934 : C859, C869, C871:...
12. NO DV(IEEE 1394) INPUT (VIDEO/AUDIO) SIGNAL Check DV_Jack connection Change to DV-mode. DV-mode switching ? Using Remote Control IC1401 power 3.3V IC1401 power 3.3V IC1401 pin 37 : “High” CHECK IC1302 Reset Circuit & X401 (24.576MHz) oscillated ? IC1401 pin 15 : “High” CHECK DV Cable Is there a signal? IC1401 pin 1,27,28,29,30 :...
8. VIDEO BLOCK DIAGRAM F_Y_IN S-VIDEO IN C_Y_IN JACK F_CVBS_IN FRONT IN IC901 JACK SAA7137 R_CVBS_IN REAR IN JACK R/G/B_SCART_IN DECODER VIN_D[9:0] EU2_V_IN VIN_CLK SCART2 SW_V_OUT VIN_INT EU2_V_OUT IC803 T_V_OUT MM1443 IC1101 TUNER AV SWITCH DMM8653 EU1_V_IN MPEG CVBSout R_OUT ENC/DEC EU1_V_OUT G_OUT...
2. Voltages are DC-measured with a digital voltmeter MODIFIED OR ALTERED WITHOUT PERMISSION IMPLEMENTATION OF THE LATEST SAFETY AND during Play mode. FROM THE LG ELECTRONICS CORPORATION. ALL PERFORMANCE IMPROVEMENT CHANGES INTO COMPONENTS SHOULD BE REPLACED ONLY WITH THE SET IS NOT DELAYED UNTIL THE NEW SERVICE TYPES IDENTICAL TO THOSE IN THE ORIGINAL CIR- LITERATURE IS PRINTED.