Cisco Catalyst 3750-E Software Configuration Manual page 1342

Hide thumbs Also See for Catalyst 3750-E:

Table of Contents

Working with Software Images

To use the archive copy-sw privileged EXEC command, you must have downloaded from a TFTP server

the images for both the stack member switch being added and the stack master. You use the archive

download-sw privileged EXEC command to perform the download.

Beginning in privileged EXEC mode from the stack member that you want to upgrade, follow these steps

to copy the running image file from the flash memory of a different stack member:

archive copy-sw /destination-system

destination-stack-member-number /force-reload

source-stack-member-number

reload slot stack-member-number

Catalyst 3750-E and 3560-E Switch Software Configuration Guide

Working with the Cisco IOS File System, Configuration Files, and Software Images

Copy the running image file from a stack member, and then

unconditionally reload the updated stack member.

At least one stack member must be running the

image that is to be copied to the switch that is

running the incompatible software.

For /destination-system destination-stack-member-number,

specify the number of the stack member (the destination) to

which to copy the source running image file. If you do not

specify this stack member number, the default is to copy the

running image file to all stack members.

Specify /force-reload to unconditionally force a system

reload after the software image downloads.

For source-stack-member-number, specify the number of the

stack member (the source) from which to copy the running

image file. The stack member number range is 1 to 9.

Reset the updated stack member, and put this configuration

change into effect.

Show Quick Links

Table of Contents

Troubleshooting

Catalyst3560-e