Configuring Virtual Machine Tracker
Verifying the Virtual Machine Tracker Configuration
Use the following commands to display and verify VM Tracker configuration information:
Command
show running-config vmtracker [all]
show vmtracker [connection conn_name] {{info
[interface intf_id ]{summary | detail | host | vm |
port-group}} | event-history}
show vmtracker [connection conn_name] status
show logging level vmtracker
show system internal vmtracker info all show
system internal vmtracker {info [all | counters |
dvs-info | event-history | host-cdp |
host-dvs-portgroup | host-dvs-switch | host-lldp |
host-portgroup | host-unconnected | host-vm |
host-vswitch | switch | switch-device-id | time-info
| vpc-sync-config]
Cisco Nexus 9000 Series NX-OS Virtual Machine Tracker Configuration Guide, Release 6.x
Verifying the Virtual Machine Tracker Configuration
Purpose
Displays the VM Tracker configuration.
Displays the VM Tracker configuration based on the
following:
• Connection
• Interface
• Event history
Displays the IP address and connection status of the
vCenter connection specified.
Displays the logging level of the syslog messages for
VM Tracker.
Displays the configuration information of VM Tracker
based on the following:
• All configuration information.
• Counter information.
• DVS information.
• Event history information.
• Host CDP information.
• Host DVS portgroup information.
• Host DVS Switch information.
• Host LLDP information.
• Host portgroup information.
• Host which are not connected.
• Host Virtual Machine information.
• Host vSwitch information.
• Switch information.
• Switch device IDs.
• Information related to the duration of various
events.
• vPC related connection information.
9