Using the Setup Wizard
4
The Setup Wizard and Device Manager are supported on
N
OTE
Microsoft Internet Explorer 6.0 or later, Mozilla Firefox 3.0 or later, and
Apple Safari 3.0 or later.
To configure the device by using the Setup Wizard:
Power on the PC that you connected to the LAN port in Step 2 of the
S
1
TEP
Connecting the Cisco RV132W
DHCP client of the firewall and receives an IP address in the
192.168.1.xxx range.
Start a web browser on your PC. In the Address bar, enter the
S
2
TEP
default IP address of the firewall: 192.168.1.1. A message appears
about the site's security certificate. The Cisco RV132W uses a self-
signed security certificate and this message appears because the
firewall is not known to your PC. You can safely click Continue to
this website (or the option shown on your particular web browser)
to go to the web site.
When the login page appears, enter the user name and password.
S
3
TEP
The default user name is cisco. The default password is cisco.
Passwords are case sensitive.
For security reasons, change the default user name and password
N
OTE
as soon as possible. See the
and Password
section.
Click Log In.
S
4
TEP
Changing the Administrator User Name and Password
From the Getting Started page, choose Change Default
S
1
TEP
Administrator Password.
Select Edit Admin Settings.
S
2
TEP
In the Administrator Settings section, enter the new administrator
S
3
TEP
username. We recommend that you do not use "cisco."
Enter the old password.
S
4
TEP
Enter the new password. Passwords should not contain dictionary
S
5
TEP
words from any language or the default password, and they should
contain a mix of letters (both upper- and lowercase), numbers, and
symbols. Passwords must be at least 8 but no more than 30
characters.
Cisco RV132W ADSL2+ Wireless-N VPN Router Quick Start Guide
section. Your PC becomes a
Changing the Administrator User Name
7