Related Manuals for Pioneer XDV-P9II
Summary of Contents for Pioneer XDV-P9II
- Page 1 6-Disc Multi-DVD Player 6-Disc Multi-DVD Player Owner’s Manual XDV-P9 This product conforms to new cord colors. This product conforms to new cord colors. ENGLISH ENGLISH —...
-
Page 2: Table Of Contents
Contents Be sure to read this. Discs Compatible with this Product ... 9 Disc Operation ... 10 Before Using ... 3 Before Using This Product ... 3 About This Product About This Manual How to Use This Manual To Ensure Safe Driving Precaution In Case of Trouble Preventing the Battery from... - Page 3 Operating with the Information Display 1 of a Video CD ... 33 Searching for a Desired Scene, Starting Playback from a Specified Time Selecting Repeat Range Selecting Audio Output Operating with the Information Display 2 of a Video CD ... 36 Switching Discs Selecting the Picture Mode Operating with the Information...
-
Page 4: Before Using
Before Using This Product About This Product • This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). CAUTION This product does not automatically change discs. To change a disc, follow the instruc- tions on page 23. Video System of a Connected Component This product is NTSC/PAL system compatible. -
Page 5: To Ensure Safe Driving
To Ensure Safe Driving WARNING • To avoid the risk of accident and the potential violation of applicable laws, this product is not for use with a video screen that is visible to the driver. • In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. -
Page 6: Precaution
• If the battery is disconnected, the preset memory will be erased and must be repro- grammed. In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. Preventing the Battery from Becoming Exhausted When using this product, be sure your car engine is running. -
Page 7: Condition Memory
Condition Memory This function memorizes audio language, subtitle language and picture mode settings made during disc playback for up to 30 discs. Without any special operations, the final setting details during playback of a disc are memorized. The next time a disc is played, the previous settings are automatically applied. -
Page 8: Key Finder
Key Finder q Remote control code selection switch (For details, see page 52.) w TOP MENU button e MENU button r AUDIO button t SUBTITLE button y ANGLE button u REVERSE (1) button i PLAY/PAUSE (6) button o PREVIOUS (4) button Note: •... -
Page 9: Using The Remote Controller
Using the Remote Controller This product is equipped with a remote controller for convenient operation. • Point the controller in the direction of the unit or remote sensor to operate. Precaution: • Do not store the remote controller in high temperatures or direct sunlight. •... -
Page 10: Discs Compatible With This Product
Discs Compatible with this Product Features of This Player Compatible with DVD, Video CD and CD Formats DVD, Video CD and CD discs that display the logos shown below can be played back on this player. DVD VIDEO The disc format logos shown above are found on disc labels or on disc jackets. Note: •... -
Page 11: Disc Operation
Precaution: • Playback of DVD-Audio, DVD-R and CD-ROM discs is not possible. This player can only playback discs bearing the marks shown on page 9. • Use the optional 8 cm disc tray to play 8 cm discs. Never use a commercially available 8 cm adapter as this will damage the player. -
Page 12: Disc Organization
Disc Organization On DVD-Video discs, the contents are divided into titles which are in turn divided into chapters. With video material, a single work (movie etc.) usually corresponds to a single title, with different scenes corresponding to separate chapters. With karaoke discs, one song corresponds to one title. -
Page 13: Main Features Of This Product
Control). You can use this to prevent your children viewing violent or adult oriented scenes. When using this product with a Pioneer Multi-Channel AV Master Unit, you can enjoy the atmosphere and excitement provided by DVD movie and music software... -
Page 14: Care Of Discs And Magazines
Care of Discs and Magazines Precaution • This product is designed for use with conven- tional, fully circular discs only. Use of shaped discs are not recommended for this product. • Check all discs before playing and discard cracked, scratched or warped discs. •... -
Page 15: Loading Discs
Do not use an 8 cm disc adapter. If it is used, the player may fail. To load an 8 cm disc, you need a special 8 cm disc tray (Part No. CXB5931). Ask your Pioneer Service Center about it. -
Page 16: Loading The Magazine
Loading the Magazine Slide the OPEN lever to the right. The front door opens. Load the magazine in the direction indicated by the arrow. Close the front door. Load in the direction indicated by the arrow. -
Page 17: Removing The Magazine
Removing the Magazine Slide the OPEN lever to the right. The front door opens. Press the EJECT button. Remove the magazine. Close the front door. • Do not put your fingers in the magazine tray as this may lead to incorrect operation and damage to the player. -
Page 18: Basic Operations
Switching Power ON/OFF Switching Power ON When Using the IP-BUS Mode Switch the display image source to this product. For details, refer to the connected unit’s manual. Press the SOURCE button on the Head Unit. Press repeatedly until DVD is selected, and the disc starts playing. When Using the STAND ALONE Mode Operate after confirming the Operation mode switch is set to DVD. -
Page 19: Switching Power Off
Switching Power OFF When Using the IP-BUS Mode Press the SOURCE button for 1 second on the Head Unit. When Using the STAND ALONE Mode Press the POWER button. Power to this product switches OFF. The remote sensor indicator goes out. When using a rear display in the IP-BUS Mode •... -
Page 20: Disc (Dvd/Video Cd/Cd) Playback
Disc (DVD/Video CD/CD) Playback Note: • Pressing the PLAY/PAUSE (6) button when a disc is playing, pauses playback. • If the last disc played was a DVD, playback starts from the point on that disc where you stopped play previously. With some discs, a menu may be displayed and playback may not be possible from where you left off previously. -
Page 21: Chapter And Track Advance/Return
With Video CDs Press the number buttons to select a desired menu option. Playback starts from the selected menu option. Operation with the joystick is not possible. 7 To Display the Menu You can display the menu by pressing the RETURN button while PBC playback. For details, refer to the instructions provided with the disc. -
Page 22: Specifying Title/Chapter/Track
Specifying Title/Chapter/Track (Direct Search) Specifying Title Specifying Chapter Specifying Track Note: • With some discs, the prohibited mark “ sible. • With Video CD, Direct Search is not possible during PBC playback. Press the number button corresponding to a desired title number when the disc is stopped. Title number is displayed for 4 seconds and playback starts from the selected title. -
Page 23: Disc Fast Forward/Reverse
Disc Fast Forward/Reverse Fast Forward Release the FORWARD (¡) button at the point you want to watch/listen. Playback resumes from that point. Note: • If you continue pressing the FORWARD (¡) button for 5 seconds, the color of the fast for- ward mark changes from blue to yellow. -
Page 24: Changing Discs
Changing Discs Note: • Empty disc trays are skipped during disc selection. • After a desired disc is selected, it automatically starts playing. Stopping Playback Note: • When you stop DVD or Video CD playback (during PBC playback only) by pressing the STOP (7) button, that location on the disc is memorized enabling playback from that point when you play the disc again. -
Page 25: Playback Variations
Playback Variations Still, Frame-by-Frame and Slow Motion Playback Still Playback This lets you pause playback and view a still picture. Press the PLAY/PAUSE (6) button during playback. The still mark ( paused letting you view a still image. • To return to normal playback, press the PLAY/PAUSE (6) button once more. Frame-by-Frame Playback This lets you move ahead or back one frame at a time during playback. -
Page 26: Slow Motion Playback
Slow Motion Playback This lets you slow down playback speed. Reverse Slow Motion playback is not possible with Video CDs. • To return to normal playback, press the PLAY/PAUSE (6) button. • During forward Slow Motion playback, you can adjust playback speed by pressing the STEP (E) or STEP (e) button. -
Page 27: Changing Audio Language
Changing Audio Language during Playback (Multi-Audio) DVDs can provide audio playback with different languages and different systems (Dolby Digital, DTS etc.). With DVDs featuring multi-audio recordings, you can switch between lan- guages/audio systems during playback. Press the AUDIO button while the audio selection mark is displayed. -
Page 28: Changing The Subtitle Language During Playback (Multi-Subtitle)
Changing the Subtitle Language during Playback (Multi-Subtitle) With DVDs featuring multi-subtitle recordings, you can switch between subtitle languages during playback. Press the SUBTITLE button while the subtitle selection mark is displayed. The subtitle language changes each time you press the SUBTITLE button. Note: •... -
Page 29: Changing The Viewing Angle During Playback (Multi-Angle)
Changing the Viewing Angle during Playback (Multi-Angle) With DVDs featuring multi-angle (scenes shot from multiple angles) recordings, you can switch among viewing angles during playback. 7 About Scenes that Let You Change the Viewing Angle During playback of a scene shot from multiple angles on this product, the angle selection mark ( ) is displayed in the bottom right of the screen. -
Page 30: Operating With Information Displays
Operating with Information Displays Calling up Information Displays Information displays let you easily perform a wide range of disc operations. These include starting playback from a specified title, chapter or time, selecting the picture mode, setting the range of Repeat play, changing discs, and switching between different audio and subtitle settings. -
Page 31: Operating With The Information Display 1 Of A Dvd
Operating with the Information Display 1 of a DVD This display lets you switch discs for playback, use the Search function to specify a title or chapter to search for a desired scene, use the Time Search function to specify a time to search for a desired scene, select the desired audio and subtitle language, and select the angle. -
Page 32: Selecting Audio, Subtitle And Angle
Selecting Audio, Subtitle and Angle You can perform Audio (language, stereo, audio type as Dolby Digital etc.), Subtitle lan- guage and Angle selection. Move the joystick left/right to select a desired option. The selected option is indicated in blue. Move the joystick up/down to switch to the desired setting. -
Page 33: Operating With The Information Display 2 Of A Dvd
Operating with the Information Display 2 of a DVD In addition to the Search and Time Search functions of the information display 1, this display lets you switch the disc for playback, select the range for Repeat play, and select the Picture mode. -
Page 34: Selecting The Picture Mode
Selecting the Picture Mode You can select between Standard, Animation and Cinema modes. Compared to Standard mode, Animation provides a picture with beautifully clear colors and the Cinema mode assures images with well defined black/white contrast. Move the joystick left/right to select the Picture mode option. - Page 35 Press the number buttons to input the desired number. For Tracks To select 3, press button 3. To select 10, press buttons 1 and 0 in order. To select 23, press buttons 2 and 3 in order. • To jump 10 tracks ahead of the selected one, press the 10 button. For Time (Time Search) To select 21 minutes 43 seconds, press buttons 2, 1, 4 and 3 in order.
-
Page 36: Selecting Repeat Range
Selecting Repeat Range You can choose between Repeat play of a disc or a track. Move the joystick left/right to select the Repeat range option. The Repeat range option is indicated in blue. Move the joystick up/down to switch to the desired setting. -
Page 37: Operating With The Information Display 2 Of A Video Cd
Operating with the Information Display 2 of a Video CD In addition to the Search and Time Search functions of the information display 1, this display lets you switch the disc for playback and select the Picture mode. During playback of Video CDs featuring PBC (Playback Control), “Play Back Control:ON”... -
Page 38: Operating With The Information Display 1 Of A Cd
Operating with the Information Display 1 of a CD This display lets you switch discs for playback, use the Search function to specify a track to search for desired track, select the range for Repeat play, and switch Random play and Scan play ON/OFF. -
Page 39: Setting Random Play
Setting Random Play Tracks of the CD you are currently listening to are played in a random order. Move the joystick left/right to select the Random option. The Random option is indicated in blue. Move the joystick up/down to switch to the desired setting. -
Page 40: Operating With The Information Display 2 Of A Cd
Operating with the Information Display 2 of a CD The following explains how to switch discs with this display. With CDs, you can switch discs using either information display 1 or information display 2. Switching Discs You can switch discs while confirming disc type. The selected disc is indicated by an arrow. Move the joystick left/right to select Disc option. -
Page 41: Changing Initial Settings
Changing Initial Settings Calling up the SET UP MENU You can use this menu to change Audio, Subtitle, Parental Lock and other DVD settings. Note: • You can also switch between SET UP MENUS by moving the joystick up/down. • If you press the MENU button during display of a SET UP MENU, the SET UP MENU is canceled and the unit returns to the previous display. -
Page 42: Setting The Subtitle (Subtitle Lang.)
Setting the Subtitle (SUBTITLE LANG.) You can set a desired subtitle language. If the selected subtitle language is recorded on the DVD, subtitles are displayed in that language. You can also switch subtitle and assist subtitle display ON/OFF. Setting Subtitles and Assist Subtitles ON/OFF You can switch Subtitle and Assist Subtitle ON/OFF as desired. -
Page 43: Setting The Subtitle Language
Setting the Subtitle Language You can set the preferred subtitle language. Move the joystick up/down to select the “SUBTITLE LANG.”. “SUBTITLE LANG.” is indicated in blue. Click the joystick. A subtitle language menu is displayed. Move the joystick to select the desired lan- guage. -
Page 44: Setting The Audio Language
Setting the Audio Language (AUDIO LANG.) You can set the preferred audio language. Move the joystick up/down to select the “AUDIO LANG.”. “AUDIO LANG.” is indicated in blue. Click the joystick. An audio language menu is displayed. Move the joystick to select the desired audio language. -
Page 45: Setting The Menu Language (Menu Lang.)
Setting the Menu Language (MENU LANG.) You can set the preferred language for displays of menus recorded on a disc. Move the joystick up/down to select the “MENU LANG.”. “MENU LANG.” is indicated in blue. Click the joystick. A menu language menu is displayed. Move the joystick to select the desired menu language. - Page 46 Press the number buttons to input a four digit code number. Click the joystick. The code number is set, and you can now set the level. Move the joystick left/right to select the desired level. Level LEVEL 8 LEVEL 7 – LEVEL 2 LEVEL 1 Click the joystick.
-
Page 47: Changing The Level
Changing the Level You can change the set Parental Lock level. Move the joystick up/down to select the “PARENTAL”. “PARENTAL” is indicated in blue. Click the joystick. Parental Lock setting menu is displayed. Press the number buttons to input the regis- tered code number. -
Page 48: Setting Aspect Ratio (Tv Aspect)
Setting Aspect Ratio (TV ASPECT) There are two kinds of display. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. Be sure to select the correct TV aspect for the display you use. -
Page 49: Setting For Digital Output (Digital Output)
• Linear PCM output of DTS audio is not possible. If you select the LPCM setting, DTS audio is not output. • When using this product with a Pioneer Multi-Channel AV Master Unit with digital input (e.g. AVM-P9000R), select the “DOLBY DIGITAL/LPCM” setting. -
Page 50: Setting Digital And Analog Audio Output (Out Selection)
Setting Digital and Analog Audio Output (OUT SELECTION) You can set linear PCM audio output for both digital and analog output. Set audio output cor- rectly to match the components you are using with this unit. Precaution: • If the setting is incorrect there will be no sound so be sure to read the manuals of the con- nected components. -
Page 51: Setting Angle Selection Mark Display (Angle)
Setting Angle Selection Mark Display (ANGLE) With discs featuring multi-angle recordings, the angle selection mark is displayed at the bot- tom right of the screen during playback of scenes enabling multi-angle viewing. You can set angle selection mark display ON/OFF. Move the joystick up/down to select the “ANGLE”. -
Page 52: Others
Switching the Remote Control Operation Mode Switch When using this product with a separately sold TV or display, you can use the supplied remote controller to perform some TV or display operations. To operate the TV or display, set the remote control operation mode switch to “TV”. To operate this product, set the switch to “DVD”. -
Page 53: Switching The Remote Control Code Selection Switch
“A”. When using this prod- uct with other Pioneer DVD players, set the remote control code selection switch to “B” to use the remote controller only for operation of those players. -
Page 54: Operating With The Head Unit
Operating with the Head Unit When in the IP-BUS mode, some operations can be performed with the head unit. When connected to a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), refer to the AV Master Unit Owner’s Manual. When connected to the “DEX-P9R”, refer to the Head Unit’s Manual. -
Page 55: Switching Power On
Switching Power ON When connected in the IP-BUS mode to a head unit other than a Pioneer Multi-Channel AV Master Unit (e.g. AVM-P9000R), performing the following steps switches power ON. Switch the display picture source to this unit. For details, refer to the connected component’s Owner’s Manual. -
Page 56: Troubleshooting
Troubleshooting If you think there is something wrong with the unit. Before requesting repairs, check the following chart. 7 Common problems Symptom Power doesn’t switch ON. The unit doesn’t operate. Operation with the remote control isn’t possible. The unit does not operate correctly even when the appropriate remote control buttons are pressed. - Page 57 7 Common problems (continued) Symptom There’s no picture. The prohibited mark “ ” is displayed, and operation is not possible. The picture stops (pauses) and the unit cannot be operated. There’s no sound. Volume level is low. There’s audio and video skipping.
-
Page 58: Problems During Dvd Playback
7 Problems during DVD playback Symptom Playback is not possible. A Parental Lock message is displayed and playback is not possible. Parental Lock cannot be canceled. Dialog language (and subtitle language) cannot be switched. No subtitles are displayed. Playback is not with the audio language and subtitle language settings selected in the SET UP MENU. - Page 59 7 Problems during Video CD playback Symptom The PBC (Playback Control) menu display cannot be called up. Repeat play and Track/Time Search are not possible. 7 Problems during Multi-Channel AV Master Unit connection Symptom There’s no sound. Information display operation is not possible. Cause The Video CD playing does not feature PBC.
-
Page 60: If You Forget Your Code Number
When problems occur with disc playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center. Message (error number) -
Page 61: Language Code Chart
Language Code Chart Language (code) Input code Japanese (ja) 1001 English (en) 0514 French (fr) 0618 Spanish (es) 0519 German (de) 0405 Italian (it) 0920 Chinese (zh) 2608 Dutch (nl) 1412 Portuguese (pt) 1620 Swedish (sv) 1922 Russian (ru) 1821 Korean (ko) 1115 Greek (el) -
Page 62: Terms
Terms Aspect Ratio This is the width-to-height ratio of a TV screen. A regular display has an aspect ratio of 4:3. Wide-screen displays have an aspect ratio of 16:9, providing a bigger picture for exceptional presence and atmosphere. Chapter DVD titles are in turn divided into chapters which are numbered in the same way as the chapters of a book. - Page 63 Multi-Audio (Multilingual Dialog) Some DVDs feature dialog recorded in multiple languages. Dialog in up to 8 languages can be recorded on a single disc, letting you choose as desired. Multi-Subtitle Subtitles in up to 32 languages can be recorded on a single DVD, letting you choose as desired.
-
Page 64: Installation
Connecting the Units Note: • This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage. • To avoid shorts in the electrical system, be sure to disconnect the ·... -
Page 65: Connecting The Power Cord
Connecting the Power Cord This Product Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. Connection method Note: • The position of the parking brake switch depends on the vehicle model. -
Page 66: Connection Diagram
Connection Diagram 7 When connecting the Multi-Channel AV Master Unit Multi-Channel AV Master Unit (e.g. AVM-P9000R) (sold separately) Yellow DVD control cable (supplied with the Multi-Channel AV Master Unit) This Product Gray Green Black Blue IP-BUS cable (supplied ) RCA cable (supplied) Note: This optical digital output jack is for •... - Page 67 IP-BUS cable (supplied with the TV tuner) Blue Hide-away TV Tuner (e.g. GEX-P7000TVP) (sold separately) RCA cable (sold separately) 20 pin cable (supplied with the TV tuner) Voice guidance speaker (supplied with the display) AV system display (e.g. AVX-7300) (sold separately) Not used.
- Page 68 7 When connecting the Head Unit Yellow (VIDEO INPUT) AV-BUS cable (supplied with the TV tuner) AV receiver/CD player with display (e.g. AVH-P6400CD) (sold separately) Black IP-BUS cable (supplied with the TV tuner) Black Blue Hide-away TV Tuner (e.g. GEX-P6400TVP) (sold separately) Black Blue...
- Page 69 Remote sensor (supplied) Black IP-BUS cable (supplied) RCA cable (supplied) This Product Not used. Blue Black Multi-CD player (sold separately) 15 cm Yellow (FRONT VIDEO OUTPUT)
- Page 70 7 When connecting the display with RCA input jacks STAND IP-BUS ALONE Remote sensor (supplied) Connecting a rear display Instead of video output for viewing on a front display, you can connect for video output enabling viewing on a rear display (for passengers in the rear of the car). If you decide to use a rear display, be sure to follow the warnings on the next page.
- Page 71 7 When Using a Display connected Rear Video Output This product’s Rear video output is for connection of a display to enable passengers in the Rear seats to watch the DVD or Video CD. WARNING • NEVER install the display in a location that enables the Driver to watch the DVD or Video CD while Driving.
-
Page 72: Transportation Of Multi-Dvd Player
Transportation of Multi-DVD Player A transport screw has been attached to the set in order to protect it during transportation. After removing the transport screw, cover the hole with the supplied seal. Be sure to remove the transport screw before mounting the set. The removed transport screw should be retained in the accessory bag for use the next time the set is transported. -
Page 73: Installation
Installation Note: • Before finally installing the unit, connect the wiring temporarily, making sure it is all con- nected up properly, and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. The use of unautho- rized parts can cause malfunctions. -
Page 74: Installing The Dvd Player Unit
Installing the DVD Player Unit 7 Mounting Horizontally Use the holes indicated with arrows. 7 Mounting Vertically Use the holes indicated with arrows. Tapping screw (6 × 16 mm) Bracket Mounting board Drill 4 to 4.5 mm diameter holes. Tapping screw (6 × 16 mm) Bracket Mounting board Drill 4 to 4.5 mm diameter holes. - Page 75 7 Mounting Angle Only 0 or 90 degree installation is available. 7 Angle Switching Dial Adjustment When the mounting angle is horizontal to the ground surface, set the dial to “H” position. When the mounting angle is vertical to the ground surface, set the dial to “V” position. The player cannot be installed in this direction.
-
Page 76: Installing The Remote Sensor
Installing the Remote Sensor Precaution: • Do not install on the dashboard where it may be subjected to direct sunlight. High tempera- tures may result in damage to the unit. • Install within the transmission range of the remote control signal. Stick the supplied double-sided tape to the back of the remote sensor, and attach it to the cen- ter console. -
Page 78: Appendix
Index Angle Angle selection mark Aspect ratio Assist subtitle Audio language Chapter Code number Condition memory Digital output Direct search DOLBY DIGITAL Fast forward Fast reverse Frame-by-frame Information display Language code chart Letter box Linear PCM (LPCM) Menu language MPEG Multi-angle Multi-audio Multi-subtitle... -
Page 79: Specifications
Specifications General System ... DVD-Video, Video CD, Compact disc audio system Usable discs ... DVD-Video, Video CD, Compact disc Signal format ... Sampling frequency: 44.1/48/96 kHz Number of quantization bits: 16/20/24; linear Power source ... 14.4 V DC (10.8 – 15.1 V allowable) Grounding system ... - Page 80 TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo 1009 3er. Piso Desp. 302 Col. Del Valle Mexico, D.F. C.P. 03100 TEL: 55-5688-52-90 <KMMNF/02C00001>...