hit counter script
Sony RHT-G1000 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Speakers
  5. RHT-G1000 - Home Theater Built-in Sound Rack...
  6. Service manual
Sony RHT-G1000 Service Manual

Sony RHT-G1000 Service Manual

Theatre stand system
Hide thumbs Also See for RHT-G1000:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
Ver. 1.2 2006.07
This system incorporates Dolby* Digital and Pro Logic Surround and
the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.
** "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems,
Inc.
Amplifier section
Stereo mode
Surround mode (reference)
* Depending on the sound field settings and the source, there may
be no sound output.
Inputs (Analog)
TV, SAT, DVD, VIDEO
Inputs (Digital)
TV, SAT, DVD, VIDEO
Tuner section
System
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Sony Corporation
9-887-061-03
Home Audio Division
2006G02-1
Published by Sony Techno Create Corporation
© 2006.07
SPECIFICATIONS
40 W + 40 W (4 ohms at 1 kHz, DIN)
power output
Front: 100 W + 100 W
(4 ohms at 1 kHz, THD 10 %)
Surround*: 100 W + 100 W
(4 ohms at 1 kHz, THD 10 %)
Subwoofer*: 200 W
(2 ohms at 1 kHz, THD 10 %)
Sensitivity: 610 mV
Impedance: 25 kilohms
Impedance: 75 ohms
PLL quartz-locked digital synthesizer
system
87.5 – 108.0 MHz (50 kHz step)
FM wire antenna (aerial)
75 ohms, unbalanced
European model:
531 – 1,602 kHz (with the interval set
at 9 kHz)
RHT-G1000
Antenna (aerial)
Intermediate frequency
Video section
Inputs/Outputs
Speakers
Front
Speaker system
Speaker unit
Surround
Speaker system
Speaker unit
Subwoofer
Speaker system
Speaker unit
THEATRE STAND SYSTEM
US Model
Canadian Model
AEP Model
UK Model
Korea Model
Other models:
530 – 1,710 kHz (with the interval set
at 10 kHz)
531 – 1,602 kHz (with the interval set
at 9 kHz)
AM loop antenna (aerial)
450 kHz
Video: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
/C
: 0.7 Vp-p
B
B
R
R
75 ohms
Accepts 480i/480p/720p/1080i
Bass reflex, magnetically shielded
65 mm cone type
Bass reflex, magnetically shielded
65 mm cone type × 2
Bass reflex, magnetically shielded
160 mm cone type × 2
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony RHT-G1000

Summary of Contents for Sony RHT-G1000

  • Page 1 AM tuner section Tuning range European model: – Continued on next page – 531 – 1,602 kHz (with the interval set at 9 kHz) THEATRE STAND SYSTEM Sony Corporation 9-887-061-03 Home Audio Division 2006G02-1 Published by Sony Techno Create Corporation © 2006.07...
  • Page 2 LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

  • Page 3: Table Of Contents

    RHT-G1000 Ver. 1.2 TABLE OF CONTENTS GENERAL ..............4 DISASSEMBLY 2-1. AMP Assy ................ 6 TEST MODE ............... 7 DIAGRAMS ..............8 4-1. Block Diagram – Video Section – ........9 – DSP Section – ............... 10 – Audio Section – ............11 –...

  • Page 4: General

    RHT-G1000 SECTION 1 This section is extracted from instruction manual. GENERAL LOCATING THE CONTROLS Front panel A Front panel display (28) D INPUT SELECTOR (23) B Sound field indicator (17) (remote sensor) (23) C VOLUME +/– (23) F "/1 (on/standby) (23)

  • Page 5: Rear Panel

    RHT-G1000 Rear panel Remote control Here describes the buttons for amplifier operation only. See page 11 for the buttons for operation of the connected components. TV ?/1 AV ?/1 RM SETUP SYSTEM STANDBY VIDEO SOUND FIELD TUNER/BAND VIDEO OUT SLEEP AMP MENU...

  • Page 6: Disassembly

    RHT-G1000 SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. AMP ASSY 1 two rivets 2 two shafts (lock) 4 AMP assy...

  • Page 7: Test Mode

    RHT-G1000 SECTION 3 TEST MODE 1. Starting Test Mode • Please start the test mode by the following procedure when you execute “Volume Test’’ or “Panel Test’’. Procedure: 1. Press the `/1 button to turn the power on. 2. Press two buttons of INPUT SELECTOR and VOLUME + at the same time for five seconds.

  • Page 8: Diagrams

    RHT-G1000 Ver. 1.2 SECTION 4 DIAGRAMS • Note for Printed Wiring Boards and Schematic Diagrams Note on Printed Wiring Boards. Note on Schematic Diagrams. • All capacitors are in µF unless otherwise noted. (p: pF) • X : parts extracted from the component side •...

  • Page 9: Block Diagram -Video Section

    RHT-G1000 4-1. BLOCK DIAGRAM –VIDEO SECTION– IC204 VIDEO SWITCH IC209 J203 (1/3) VIDEO AMP VIDEO OUT J204 (1/3) J201 VIDEO OUT 9 IN2 VIDEO OUT J205 (1/3) 14 IN3 VIDEO VIDEO OUT AV SEL0-3 DSP SECTION (Page 10) J206 SAT IN...

  • Page 10: Dsp Section

    RHT-G1000 Ver. 1.1 –DSP SECTION– J202 AUDIO IN IC512 IC518 IC506 DIGITAL AUDIO DELAY IC507 SELECTOR DIGITAL AUDIO SD-RAM PROCESSOR IC203 72-75 Q201 7-10 OPTICAL IN 77-80 OPTICAL BUFFER 13-16 D0-D15 98,99 D0 – D15 RECEIVER 29-32 102-105 35-38 107,108...

  • Page 11: Audio Section

    RHT-G1000 – AUDIO SECTION– IC108 IC101 STREAM PROCESSOR POWER DRIVER D1 – D3, MCKO, BCKO, LRCKO 31 DATA OUTR1 2 PWMBP OUTB FRONT SECTION MCKO (Page 10) 36 XFSIIN PWMAP (–) OUTR2 OUTA BCKO 30 BCK RESET LRCKO OUTL1 29 LRCK...

  • Page 12: Power Section

    RHT-G1000 –POWER SECTION– T901 D901 TRANSFORMER(MAIN) AC IN IC901 D931 D905 +31.5V Q901 AC/DC DC/DC POWER CONVERTER CONVERTER ON/OFF IC931 T801 VOLTAGE DETECT PC901 TO FLUORESCENT PHOTO RECT INDICATOR TUBE COUPLER D801,802 D804,805 Q943,947 PC903 Q801 POWER PHOTO CONTROL COUPLER...

  • Page 13: Printed Wiring Board - Main Board (Side A)

    RHT-G1000 Ver. 1.2 4-2. PRINTED WIRING BOARD – MAIN BOARD (SIDE A) – • See page 31 for Circuit Boards Location. :Uses unleaded solder. MAIN BOARD (SIDE A) • Semiconductor Location Ref. No. Location D503 D507 D914 F-10 D915 F-10...

  • Page 14: Printed Wiring Board - Main Board (Side B)

    RHT-G1000 Ver. 1.2 4-3. PRINTED WIRING BOARD – MAIN BOARD (SIDE B) – :Uses unleaded solder. • See page 31 for Circuit Boards Location. • Semiconductor SPOUT SPOUT Location BOARD BOARD (Page 30) (Page 30) Ref. No. Location MAIN BOARD (SIDEB)

  • Page 15: Schematic Diagram - Main Board (1/8)

    RHT-G1000 4-4. SCHEMATIC DIAGRAM – MAIN BOARD (1/8) – • See page 32 for IC Block Diagrams. RHT-G1000...

  • Page 16: Schematic Diagram - Main Board (2/8)

    RHT-G1000 4-5. SCHEMATIC DIAGRAM – MAIN BOARD (2/8) – • See page 32 for IC Block Diagrams. RHT-G1000...

  • Page 17: Schematic Diagram - Main Board (3/8)

    RHT-G1000 4-6. SCHEMATIC DIAGRAM – MAIN BOARD (3/8) – • See page 8 for Waveforms. • See page 32 for IC Block Diagrams. RHT-G1000...

  • Page 18: Schematic Diagram - Main Board (4/8)

    RHT-G1000 • See page 32 for IC Block Diagrams. 4-7. SCHEMATIC DIAGRAM – MAIN BOARD (4/8) – RHT-G1000...

  • Page 19: Schematic Diagram - Main Board (5/8)

    RHT-G1000 Ver. 1.2 4-8. SCHEMATIC DIAGRAM – MAIN BOARD (5/8) – • See page 8 for Waveforms. • See page 40 for IC Pin Function Description. AEP, UK US, CND RHT-G1000...

  • Page 20: Schematic Diagram - Main Board (6/8)

    RHT-G1000 • See page 8 for Waveforms. • See page 33, 34 for IC Block Diagrams. 4-9. SCHEMATIC DIAGRAM – MAIN BOARD (6/8) – RHT-G1000...

  • Page 21: Schematic Diagram - Main Board (7/8)

    RHT-G1000 4-10. SCHEMATIC DIAGRAM – MAIN BOARD (7/8) – • See page 8 for Waveforms. • See page 37 for IC Pin Function Description. RHT-G1000...

  • Page 22: Schematic Diagram - Main Board (8/8)

    RHT-G1000 Ver. 1.2 4-11. SCHEMATIC DIAGRAM – MAIN BOARD (8/8) – RHT-G1000...

  • Page 23: Printed Wiring Board - Io Board (Side A)

    RHT-G1000 4-12. PRINTED WIRING BOARD – IO BOARD (SIDE A) – :Uses unleaded solder. • See page 31 for Circuit Boards Location. " & IO BOARD (SIDE A) 1-870-129- (11) • Semiconductor Location Ref. No. Location IC204 IC205 IC206 IC207...

  • Page 24: Printed Wiring Board - Io Board (Side B)

    RHT-G1000 Ver. 1.2 4-13. PRINTED WIRING BOARD – IO BOARD (SIDE B) – • See page 31 for Circuit Boards Location. :Uses unleaded solder. VIDEO COMPONENT AUDIO IN AUDIO IN AUDIO IN SAT IN DVD IN VIDEO IN COAXIAL VIDEO...

  • Page 25: Schematic Diagram - Io Board (1/2)

    RHT-G1000 Ver. 1.2 4-14. SCHEMATIC DIAGRAM – IO BOARD (1/2) – • See page 34, 35 for IC Block Diagrams. RHT-G1000...

  • Page 26: Schematic Diagram - Io Board (2/2)

    RHT-G1000 Ver. 1.2 4-15. SCHEMATIC DIAGRAM – IO BOARD (2/2) – • See page 35 for IC Block Diagrams. 4-17. SCHEMATIC DIAGRAM – ACIN BOARD, AC2 BOARD (US,CND) – 4-16. PRINTED WIRING BOARD – ACIN BOARD, AC2 BOARD (US,CND) –...

  • Page 27: Printed Wiring Board – Panel, Cnv Board (Side A)

    RHT-G1000 4-16. PRINTED WIRING BOARD – PANEL, CNV BOARD (SIDE A) – :Uses unleaded solder. • See page 31 for Circuit Boards Location. (SIDE A) PANEL BOARD AUTO VIRTUAL NEWS 1-870-130- (11) CNV BOARD (SIDE A) • Semiconductor Location Ref. No.

  • Page 28: Printed Wiring Board - Panel, Cnv Board (Side B)

    RHT-G1000 4-17. PRINTED WIRING BOARD – PANEL, CNV BOARD (SIDE B) – • See page 31 for Circuit Boards Location. :Uses unleaded solder. " & PANEL BOARD (SIDE B) VOLUME – INPUT SELECTOR 1-870-130- (11) CNV BOARD (SIDE B) • Semiconductor Location Ref.

  • Page 29: Schematic Diagram - Panel, Cnv Board

    RHT-G1000 • See page 36 for IC Block Diagrams. 4-18. SCHEMATIC DIAGRAM – PANEL, CNV BOARD – RHT-G1000...

  • Page 30: Printed Wiring Board - Spout Board

    RHT-G1000 4-19. PRINTED WIRING BOARD – SPOUT BOARD – 4-20. SCHEMATIC DIAGRAM – SPOUT BOARD – :Uses unleaded solder. • See page 31 for Circuit Boards Location. " SPOUT BOARD MAIN BOARD (Page 14) MAIN BOARD (Page 14) FR- FR+...
  • Page 31 RHT-G1000 • Circuit Boards Location MAIN board CNV board IO board tuner pack PANEL board SPOUT board...

  • Page 32: Main Board

    RHT-G1000 • IC Block Diagrams – MAIN BOARD – IC101-104, 106, 107 CXD9775M GVDD B GVDD GVDD B BST B DVDD DREG DREG GND 1 PVDD B GATE PWM BP 2 PVDD B RECEIVER DRIVE OUT B TIMING GND 3...
  • Page 33 RHT-G1000 IC501 PCM1803DBR DELTA-SIGMA MODE 1 L IN 1 MODULATOR MODE/ MODE 0 R IN 2 FORMAT x1/64, x1/128 FMT 1 CONTROL DECIMATION V_REF_1 3 FMT 0 REFERENCE FILTER V_REF_2 4 WITH HIGH-PASS FILTER SERIAL INTERFACE DELTA-SIGMA MODULATOR VCC 5...
  • Page 34 RHT-G1000 IC512 NJU26902VM1-TE2 RESETb 20 VDD 19 VDD SERIAL SERIAL AUDIO AUDIO 18 SDO INTERFACE INTERFACE DELAY COUNT(2) 17 FS COUNT(3) 16 BYPASS L/R IN L/R OUT 15 SDO_OD BCKI 14 COUNT(1) COUNT(4) 13 MODE(1) COUNT(5) CONTROL LOGIC 12 COUNT(0) 11 MODE(0) –...
  • Page 35 RHT-G1000 IC213 NJM2585M (TE2) CH1 IN1 CONT1 BIAS 75Ω 24 CH1 OUT Driver SW CONTROL 1 23 POWER SAVE CH1 IN2 CONT1 BIAS 75Ω CONT2 22 CH2 OUT Driver SW CONTROL 2 21 V+2 CH1 IN3 CONT1 BIAS 75Ω 20 CH3 OUT...
  • Page 36 RHT-G1000 – PANEL BOARD – IC842 ML9208-03MBZ03B SEG4 SEGMENT DRIVER SEG21 SEG3 SEG22 CGROM SEG2 248w X 35b DCRAM SEG23 SEG1 16w X 8b CGRAM 8w X 35b SEG24 ADRAM 16w X 2b SEG25 ADDRESS DRIVER SELECTOR SEG26 SEG27 READ...
  • Page 37 RHT-G1000 • IC Pin Function Description MAIN BOARD IC506 CXD9862R (DIGITAL AUDIO SIGNAL PROCESSOR) Pin No. Pin name Description — Ground terminal XRST Reset signal input from system controller (IC509) (“L”: reset) EXTIN Master clock input (not used) LRCKI3 Sampling frequency switch signal input (not used) VDDI —...
  • Page 38 RHT-G1000 Pin No. Pin name Description — Ground termial WMD0 S-RAM wait mode setting signal input (Fixed at “H” in this model) PAGE2 Page switch signal output (not used) — Ground terminal 52,53 PAGE1,PAGE0 Page switch signal output (not used) BOOT Boot mode control signal input (Fixed at “L”...
  • Page 39 RHT-G1000 Pin No. Pin name Description GP11 — Not used TST3 — Not used VDDI — Power supply terminal (+2.6V)
  • Page 40 RHT-G1000 • IC Pin Function Description MAIN BOARD IC509 M30622MEP-A52FPU0 (SYSTEM CONTROLLER) Pin No. Pin name Description DAMP SCDT/ Data output to digital AMP (IC108 to 110) DIAT_SDATA DAMP SHIFT/ Data output to Digital AMP (IC108 to 110) DIAT_SCLK V-CONTROL...
  • Page 41 RHT-G1000 Pin No. Pin name Description LED1 Control signal output to AUTO LED driver (Q811) DRIVE_RST(EN) Reset signal output to digital AMP (IC108 to 110) DRIVE_OCP(DIAG) DIAG signal input from digittal AMP (IC108 to 110) OVERFLOW1 Over flow status 1 signal input from digital AMP (IC108 to 110)
  • Page 42 RHT-G1000 Pin No. Pin name Description KEY1 Key input 1 signal input — Ground terminal KEY0 Key input 0 signal input VREF — Reference Voltage (+3.3V) — Power supply terminal (+3.3V) M-ST/WMUTE LINK (multi STEREO) control signal output (not used)

  • Page 43: Exploded Views

    RHT-G1000 Ver. 1.2 SECTION 5 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by may have some difference from the original number in the exploded views are not mark 0 or dotted line with mark one.

  • Page 44: Panel Section

    RHT-G1000 Ver. 1.1 5-2. PANEL SECTION not supplied 55 56 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-658-633-01 CATCHER (L15) 2-632-378-01 BUTTON (POWER) (BLACK) 1-826-128-11 LOUDSPEAKER (16cm) 2-632-378-11 BUTTON (POWER) (WHITE) 2-633-343-01 ESCUTCHEON (SELECT)

  • Page 45: Speaker Section

    RHT-G1000 5-3. SPEAKER SECTION not supplied 105 105 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-826-244-11 LOUDSPEAKER (6.5cm) 4-229-966-12 SCREW (4X16), +BV TAPPING 4-986-971-01 SCREW (3.5) A-1128-179-A SPEAKER ASSY, FR 1-831-271-11 CORD (WITH CONNECTOR) (SPEAKER)

  • Page 46: Amp Section-1

    RHT-G1000 Ver. 1.2 5-4. AMP SECTION-1 not supplied not supplied not supplied not supplied not supplied not supplied 162 156 not supplied not supplied not supplied US, CND Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark...

  • Page 47: Amp Section-2

    RHT-G1000 Ver. 1.2 5-5. AMP SECTION-2 not supplied F901 not supplied US, CND not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-828-363-11 WIRE (FLAT TYPE) (19 CORE) A-1144-727-A ACIN BOARD, COMPLETE (US, CND)
  • Page 48 RHT-G1000 Ver. 1.2 SECTION 6 AC IN ELECTRICAL PARTS LIST NOTE: • Items marked “*” are not stocked since they • Due to standardization, replacements in the parts list may be different from the parts are seldom required for routine service.
  • Page 49 RHT-G1000 Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C230 1-100-352-91 CERAMIC CHIP < DIODE > C231 1-100-352-91 CERAMIC CHIP C232 1-126-964-11 ELECT 10uF D201 8-719-067-40 DIODE STZ6.8N-T146 C233 1-126-964-11 ELECT 10uF D202 8-719-067-40 DIODE STZ6.8N-T146...
  • Page 50 RHT-G1000 Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < RESISTOR > R258 1-216-845-11 METAL CHIP 100K 1/10W R259 1-216-845-11 METAL CHIP 100K 1/10W R201 1-216-821-11 METAL CHIP 1/10W R260 1-216-845-11 METAL CHIP 100K...
  • Page 51 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R337 1-216-864-11 SHORT CHIP R338 1-216-864-11 SHORT CHIP C181 1-115-185-11 CERAMIC CHIP 0.033uF R339 1-216-864-11 SHORT CHIP C182 1-115-185-11 CERAMIC CHIP 0.033uF C183 1-115-185-11 CERAMIC CHIP 0.033uF...
  • Page 52 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C276 1-163-021-91 CERAMIC CHIP 0.01uF C372 1-126-960-11 ELECT C277 1-163-021-91 CERAMIC CHIP 0.01uF C374 1-162-970-11 CERAMIC CHIP 0.01uF C278 1-163-021-91 CERAMIC CHIP 0.01uF C279 1-163-021-91 CERAMIC CHIP 0.01uF...
  • Page 53 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark (AEP, UK, KR) 0 C907 C554 1-107-726-91 CERAMIC CHIP 0.01uF 1-162-965-11 CERAMIC CHIP 0.0015uF 10% C555 1-107-726-91 CERAMIC CHIP 0.01uF (US, CND) C556 1-107-726-91 CERAMIC CHIP 0.01uF...
  • Page 54 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C965 1-113-896-11 CERAMIC 220PF 250V < EARTH TERMINAL > (AEP, UK, KR) C966 1-113-896-11 CERAMIC 220PF 250V * EB901 1-537-738-21 TERMINAL, EARTH (US, CND)
  • Page 55 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L106 1-457-078-11 AIR-CORE COIL 0 Q901 8-729-140-04 TRANSISTOR 2SB1116A-L 0 Q921 8-729-142-51 TRANSISTOR 2SD1616A-TP-LK L111 1-457-077-11 AIR-CORE COIL Q943 8-729-027-43 TRANSISTOR DTC114EKA-T146 L112 1-457-077-11 AIR-CORE COIL...
  • Page 56 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R197 1-220-942-11 METAL CHIP 1/4W R348 1-216-817-11 METAL CHIP 1/10W R201 1-220-942-11 METAL CHIP 1/4W R351 1-216-809-11 METAL CHIP 1/10W R202 1-220-942-11 METAL CHIP...
  • Page 57 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R462 1-216-833-11 METAL CHIP 1/10W R540 1-216-809-11 METAL CHIP 1/10W R541 1-216-809-11 METAL CHIP 1/10W R463 1-216-833-11 METAL CHIP 1/10W R542 1-216-809-11 METAL CHIP...
  • Page 58 RHT-G1000 Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R611 1-216-833-11 METAL CHIP 1/10W R777 1-216-833-11 METAL CHIP 1/10W R612 1-216-833-11 METAL CHIP 1/10W R789 1-216-809-11 METAL CHIP 1/10W R614 1-216-833-11 METAL CHIP...
  • Page 59 RHT-G1000 Ver. 1.2 MAIN PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C802 1-124-261-00 ELECT 10uF R940 1-216-833-11 METAL CHIP 1/10W C803 1-124-584-00 ELECT 100uF R941 1-216-864-11 SHORT CHIP C804 1-162-974-11 CERAMIC CHIP 0.01uF R943...
  • Page 60 RHT-G1000 Ver. 1.2 PANEL SPOUT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > < TERMINAL > Q801 6-550-065-01 TRANSISTOR CPH5504-TL-E TM851 1-780-266-11 TERMINAL BOARD (SPEAKER) Q811 8-729-027-43 TRANSISTOR DTC114EKA-T146 ************************************************************ Q812 8-729-027-43 TRANSISTOR DTC114EKA-T146...
  • Page 61 RHT-G1000 MEMO...

  • Page 62: Revision History

    RHT-G1000 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2006.02...

Table of Contents