Diagnostic Monitor Action - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
diagnostic monitor action
To direct the action of the switch when it detects a packet memory failure, use the diagnostic monitor
action command.
Syntax Description
conservative
normal
aggressive
Command Default
normal mode
Command Modes
Global configuration mode
Command History
Release
12.2(18)EW
Usage Guidelines
Use the conservative keyword when you do not want the switch to reboot so that the problem can be
fixed.
Use the aggressive keyword when you have redundant supervisor engines, or when network-level
redundancy has been provided.
Examples
The following example shows how to configure the switch to initiate an RPR switchover when an
ongoing failure occurs:
Switch# configure terminal
Switch (config)# diagnostic monitor action normal
Related Commands
Command
show diagnostic result module test 2
show diagnostic result module test 3
diagnostic monitor action [conservative | normal | aggressive]
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
(Optional) Specifies that the bootup SRAM diagnostics log all failures
and remove all affected buffers from the hardware operation. The
ongoing SRAM diagnostics will log events, but will take no other
action.
(Optional) Specifies that the SRAM diagnostics operate as in
conservative mode, except that an ongoing failure resets the supervisor
engine; allows for the bootup tests to map out the affected memory.
(Optional) Specifies that the SRAM diagnostics operate as in normal
mode, except that a bootup failure only logs failures and does not allow
the supervisor engine to come online; allows for either a redundant
supervisor engine or network-level redundancy to take over.
Description
Displays the module-based diagnostic test results.
Displays the module-based diagnostic test results.
diagnostic monitor action
2-215
Advertisement
Table of Contents
