hit counter script
HP EliteDesk 800 G3 TWR Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Desktop
  5. EliteDesk 800 G3
  6. Maintenance and service manual

HP EliteDesk 800 G3 TWR Maintenance And Service Manual

Business pc
Hide thumbs Also See for EliteDesk 800 G3 TWR:
Table of Contents

Advertisement

Quick Links

Maintenance and Service Guide
HP EliteDesk 800 G3 TWR Business PC
HP EliteDesk 880 G3 TWR Business PC

Advertisement

Table of Contents
loading

Related Manuals for HP EliteDesk 800 G3 TWR

Summary of Contents for HP EliteDesk 800 G3 TWR

  • Page 1 Maintenance and Service Guide HP EliteDesk 800 G3 TWR Business PC HP EliteDesk 880 G3 TWR Business PC...
  • Page 2 HP Inc. under license. bound by the terms of the HP End User License This guide describes features that are common Intel, Celeron, and Pentium are trademarks of Agreement (EULA).
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product features ............................1 Standard configuration features ........................... 1 Front panel components ............................2 Rear panel components ............................3 Serial number location ............................4 2 Illustrated parts catalog ..........................5 TWR chassis spare parts ............................5 Computer major components ......................
  • Page 6 SATA hard drive cables ............................17 SATA data cable ..........................17 SMART ATA drives ..............................17 Cable management .............................. 18 4 Removal and replacement procedures – Microtower (MT) chassis ..............19 Preparation for disassembly ..........................19 Access panel ................................. 20 Front bezel ................................
  • Page 7 Antennas ................................68 System board ............................... 72 System board callouts ........................73 5 Computer Setup (F10) Utility ........................75 Computer Setup (F10) Utilities ..........................75 Using Computer Setup (F10) Utilities ....................75 Computer Setup–Main ........................77 Computer Setup—Security ....................... 79 Computer Setup—Advanced ......................
  • Page 8 Clearing and resetting the BIOS ........................127 9 Using HP PC Hardware Diagnostics (UEFI) ..................... 128 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..............128 10 Backing up, restoring, and recovering ......................130 Backing up, restoring, and recovering in Windows 10 ..................130 Creating recovery media and backups ....................
  • Page 9 Appendix D Specifications ..........................151 TWR Specifications ............................151 Index ................................153...

  • Page 11: Product Features

    Standard configuration features Features may vary depending on the model. For support assistance and to learn more about the hardware and software installed on your computer model, run the HP Support Assistant utility. NOTE: This computer model can be used in a tower orientation or a desktop orientation.

  • Page 12: Front Panel Components

    Drive configuration may vary by model. Some models have a bezel blank covering one or more drive bays. Front panel components 5.25-inch half-height drive bay (behind bezel) Audio-out (headphone) jack Slim optical drive (optional) USB 2.0 port with HP Sleep and Charge SD card reader (optional) USB 2.0 port Power button USB 3.x ports (2)

  • Page 13: Rear Panel Components

    USB 3.x ports (4) NOTE: Your model may have additional optional ports available from HP. When a device is plugged into either audio jack, a dialog box will appear on the monitor screen asking if you want to use the jack for a microphone or a headphone.

  • Page 14: Serial Number Location

    Serial number location Each computer has a unique serial number and a product ID number that are located on the exterior of the computer. Keep these numbers available for use when contacting customer service for assistance. Chapter 1 Product features...

  • Page 15: Illustrated Parts Catalog

    TWR chassis spare parts Computer major components NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Item Description...
  • Page 16 Item Description 250W, 92% efficient 250W, 85% efficient (800 models) 250W, 85% efficient (880 models) Memory modules (PC4-2400) 16-GB 8-GB 4-GB 2-GB Processors (include replacement thermal material; not illustrated)) Intel Core i7-7700 processor Intel Core i7-7700K processor Intel Core i5-7600 processor Intel Core i5-7500 processor Intel Core i3-7320 processor Intel Core i3-7300 processor...

  • Page 17: Miscellaneous Parts

    Miscellaneous parts Item Description Front I/O assembly Hood sensor Hood lock Speaker Secure Digital (SD) card reader Optical drive latch Bezel dust filter Bezel blank, main Bezel blank, slim optical drive Rubber feet Hard drive grommet Mouse PS2, optical USB, laser USB, optical USB, antimicrobial USB, washable...

  • Page 18: Boards, Cards, And Ports

    Item Description USB, hardened USB, grey Keyboards PS/2 slim USB grey USB slim Wireless keyboard, mouse, and dongle Boards, cards, and ports Description Graphics cards: Nvidia GeForce GT730 2 GB PCIe x8 Nvidia GeForce GT720 1 GB PCIe x8 AMD Radeon™ RX 480 2 GB FH PCIe x16 AMD Radeon RX 460 2 GB FH PCIe x16 AMD Radeon R7 450 4 GB FH PCIe x16 G5 Nvidia GTX 1080 8 GB FH PCIe x16...

  • Page 19: Cables And Adapters

    Cables and adapters Item Description SATA drive power cable SATA data cable, 6 inch, 2 straight ends SATA data cable (RF solution), 6 inch, 2 straight ends SATA data cable, 6 inch, 1 straight end, 1 angled end SATA data cable (RF solution), 6 inch, 1 straight end, 1 angled end SATA data cable, 14 inch, 1 straight end, 1 angled end SATA data cable (RF solution), 14 inch, 1 straight end, 1 angled end SATA data cable, 15 inch, 1 straight end, 1 angled end...

  • Page 20: Drives

    Item Description DisplayPort to DVI USB-C to USB 3.0 USB 3.1 Type-C to DisplayPort Drives Description Hard drives 2-TB, 7200-rpm, 3.5-inch 1-TB, 7200-rpm, 3.5-inch 1-TB, 7200-rpm, 2.5-inch 1-TB, 7200-rpm,. hybrid SSD, 3.5-inch 1-TB, 5400-rpm,. hybrid SSD, 3.5-inch 500 GB, 7200 rpm, 3.5-inch 500 GB, 7200 rpm, 7 mm 500-GB, 7200-rpm, OPAL2, self-encrypting drive (SED) 500-GB, 5400-rpm, FIPS...

  • Page 21: Routine Care, Sata Drive Guidelines, And Disassembly Preparation

    Routine care, SATA drive guidelines, and disassembly preparation This chapter provides general service information for the computer. Adherence to the procedures and precautions described in this chapter is essential for proper service. CAUTION: When the computer is plugged into an AC power source, voltage is always applied to the system board.

  • Page 22: Preventing Electrostatic Damage To Equipment

    Preventing electrostatic damage to equipment Many electronic components are sensitive to ESD. Circuitry design and structure determine the degree of sensitivity. The following packaging and grounding precautions are necessary to prevent damage to electric components and accessories. ● To avoid hand contact, transport products in static-safe containers such as tubes, bags, or boxes. Protect all electrostatic parts and assemblies with conductive or approved containers or packaging.

  • Page 23: Recommended Materials And Equipment

    Recommended materials and equipment Materials and equipment that are recommended for use in preventing static electricity include: ● Antistatic tape ● Antistatic smocks, aprons, or sleeve protectors ● Conductive bins and other assembly or soldering aids ● Conductive foam ● Conductive tabletop workstations with ground cord of one-megohm +/- 10% resistance ●...

  • Page 24: Routine Care

    Never cover the ventilation slots on the monitor with any type of material. ● ● Install or enable power management functions of the operating system or other software, including sleep states. Routine care General cleaning safety precautions Never use solvents or flammable solutions to clean the computer. Never immerse any parts in water or cleaning solutions;...

  • Page 25: Cleaning The Monitor

    ● If you remove a key, use a specially designed key puller to prevent damage to the keys. This tool is available through many electronic supply outlets. CAUTION: Never remove a wide leveled key (like the space bar) from the keyboard. If these keys are improperly removed or installed, the keyboard may not function properly.

  • Page 26: Screws

    The screws used in the computer are not interchangeable. They may have standard or metric threads and may be of different lengths. If an incorrect screw is used during the reassembly process, it can damage the unit. HP strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations.

  • Page 27: Sata Hard Drives

    6.0 Gb/s SATA hard drive cables SATA data cable Always use an HP approved SATA 6.0 Gb/s cable as it is fully backwards compatible with the SATA 1.5 Gb/s drives. Current HP desktop products ship with SATA 6.0 Gb/s hard drives.

  • Page 28: Cable Management

    Cable management Always follow good cable management practices when working inside the computer. ● Keep cables away from major heat sources like the heat sink. ● Do not jam cables on top of expansion cards or memory modules. Printed circuit cards like these are not designed to take excessive pressure on them.

  • Page 29: Removal And Replacement Procedures - Microtower (Mt) Chassis

    Removal and replacement procedures – Microtower (MT) chassis Adherence to the procedures and precautions described in this chapter is essential for proper service. After completing all necessary removal and replacement procedures, run the Diagnostics utility to verify that all components operate properly. NOTE: Not all features listed in this guide are available on all computers.

  • Page 30: Access Panel

    Access panel To access internal components, you must remove the access panel: Prepare the computer for disassembly (Preparation for disassembly on page Slide the access panel release lever to the left (1) so that it locks into place. Then slide the access panel back (2) and lift it off the computer (3).

  • Page 31: Front Bezel

    Front bezel Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Lift up the three tabs on the top of the bezel (1), and then rotate the bezel off the chassis (2). To replace the front bezel, reverse the disassembly procedures.

  • Page 32: Front Bezel Security

    Front bezel security The front bezel can be secured in place by installing a screw through the front of the chassis into the front bezel. Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Remove the silver 6-32 security screw located inside the front bezel.

  • Page 33: Removing Bezel Blanks

    Removing bezel blanks On some models, there may be bezel blanks covering the optical drive bays. You must remove the bezel blank before installing an optical drive. To remove a bezel blank: Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Remove the front bezel...

  • Page 34: Optional Front Bezel Dust Filter

    NOTE: The optional front bezel dust filter is available from HP. To remove, clean, and replace the dust filter: Prepare the computer for disassembly...

  • Page 35: Memory

    Memory The computer comes with double data rate 4 synchronous dynamic random access memory (DDR4-SDRAM) dual inline memory modules (DIMMs). The memory sockets on the system board are populated with at least one preinstalled memory module. To achieve the maximum memory support, you can populate the system board with up to 64 GB of memory configured in a high-performing dual-channel mode.

  • Page 36: Removing And Installing Dimms

    DIMM and one 1 GB DIMM, and Channel B should be populated with the other two 1 GB DIMMs. With this configuration, 4 GB will run as dual-channel and 1 GB will run as single-channel. In any mode, the maximum operational speed is determined by the slowest DIMM in the system. ●...
  • Page 37 Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). Replace the computer access panel. Reconnect the power cord and turn on the computer. Lock any security devices that were disengaged when the access panel was removed.

  • Page 38: Drive Cage

    Drive cage You must remove the drive cage to access components underneath it. To remove the drive cage: Prepare the computer for disassembly (Preparation for disassembly on page Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. Push the green drivelock mechanism away from the hard drive bays (1), lift the rear of the drive cage up (2), and then slide the drive cage back and lift it out of the chassis (3).
  • Page 39 Drive cage...

  • Page 40: Expansion Cards

    Expansion cards The computer has two PCI Express x1 expansion sockets, one PCI Express x16 expansion socket, and one PCI Express x16 expansion socket that is downshifted to a x4 socket. NOTE: You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 socket. For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 socket that is NOT downshifted to a x4.
  • Page 41 ● The other two slot covers must be removed with a screwdriver. Insert a flat-bladed screwdriver into the slots on the rear of the slot cover (1) and rock the slot cover back and forth (2) to break it free from the chassis. Expansion cards...
  • Page 42 If you are removing a PCI Express x1 card, hold the card at each end and carefully rock it back and forth until the connectors pull free from the socket. Lift the card straight up (1), and then away from the inside of the chassis (2) to remove it. Be sure not to scrape the card against other components.
  • Page 43 To install a half-length expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bottom of the bracket on the card slides into the small slot on the chassis. Press the card straight down into the expansion socket on the system board (2).
  • Page 44 Rotate the slot cover retention latch back in place to secure the expansion card. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. Replace the computer access panel. Reconnect the power cord and turn on the computer. Lock any security devices that were disengaged when the computer access panel was removed.

  • Page 45: Drives

    You must install mounting screws for hard drives and 5.25-inch optical drives to ensure the drive will ● line up correctly in the drive cage and lock in place. HP has provided four extra 3.5-inch hard drive mounting screws installed on top of the drive bay.

  • Page 46: Drive Positions

    Drive positions Drive positions 5.25-inch half-height drive bay 2.5-inch hard drive bay 3.5-inch secondary hard drive bay 9.5 mm slim optical drive bay 3.5-inch primary hard drive bay NOTE: The drive configuration on your computer may be different than the drive configuration shown above.

  • Page 47: System Board Connections

    System board connections Refer to the following illustration and table to identify the system board connectors for your model. Item System board connector System board label Color Component PCI Express x16 downshifted to X4PCIEXP white Expansion card a x4 PCI Express x1 X1PCIEXP2 Black Expansion card...

  • Page 48: Installing And Removing Drives

    Installing and removing drives Removing a 5.25-inch drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Remove the front bezel (Front bezel on page...

  • Page 49: Installing A 5.25-Inch Drive

    Installing a 5.25-inch drive Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Remove the front bezel (Front bezel on page 21). If you are installing a drive in a bay covered by a bezel blank, remove the bezel blank.
  • Page 50 If you are installing a 5.25-inch drive in a vacant drive bay, you may need to remove the metal shield covering the front of the bay. Insert a flat-bladed screwdriver into the slots on the front of the shield (1) and rock the shield back and forth (2) to break it free from the chassis.

  • Page 51: Removing A 9.5 Mm Slim Optical Drive

    Connect the power cable (1) and data cable (2) to the rear of the optical drive. Connect the opposite end of the data cable to one of the light blue SATA connectors on the system board. NOTE: Refer to System board connections on page 37 for an illustration of the system board drive connectors.

  • Page 52: Installing A 9.5 Mm Slim Optical Drive

    Push the green release latch on the right rear side of the drive toward the center of the drive (1), and then slide the drive forward and out of the bay (2). Installing a 9.5 mm slim optical drive Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page...

  • Page 53: Installing A 9.5 Mm Slim Optical Drive

    Push the green release latch on the right rear side of the drive toward the center of the drive (1), and then slide the drive forward and out of the bay (2). Installing a 9.5 mm slim optical drive Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page...
  • Page 54 Slide the optical drive through the front bezel all the way into the bay (1) so that the latch on the rear of the drive locks into place (2). Connect the power cable (1) and data cable (2) to the rear of the optical drive. Connect the opposite end of the data cable to one of the light blue SATA connectors on the system board.

  • Page 55: Removing A 3.5-Inch Hard Drive

    Removing a 3.5-inch hard drive NOTE: Before you remove the old hard drive, be sure to back up the data from the old hard drive so that you can transfer the data to the new hard drive. Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page...

  • Page 56: Installing A 3.5-Inch Hard Drive

    Installing a 3.5-inch hard drive Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Install mounting screws on the sides of the hard drive using standard 6-32 silver-and-blue mounting screws. NOTE: Four extra 6-32 mounting screws for 3.5-inch hard drives are installed on the exterior of the hard drive bays.
  • Page 57 – Secure the drive to the bay adapter bracket by installing four black M3 adapter bracket screws through the underside of the bracket and into the drive. Drives...
  • Page 58 Install four 6-32 silver-and-blue mounting screws in the adapter bracket (two on each side of – the bracket). Remove the drive cage if it was not already removed (Drive cage on page Slide the drive into the drive bay, making sure to align the mounting screws with the mounting slots, until the drive snaps into place.
  • Page 59 Connect the power cable (1) and data cable (2) to the rear of the hard drive. If installing a new drive, connect the opposite end of the data cable to the appropriate system board connector. NOTE: You must connect the primary hard drive data cable to the dark blue connector labeled SATA0 to avoid any hard drive performance problems.

  • Page 60: Removing A 2.5-Inch Hard Drive

    Removing a 2.5-inch hard drive Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Disconnect the power cable (1) and data cable (2) from the rear of the hard drive. Pull the release lever at the rear of the drive outward (1) and pull the rear of the drive outward (2). Then slide the front of the drive forward until it stops and pull the drive up and out of the drive bay (3).

  • Page 61: Installing A 2.5-Inch Hard Drive

    Install four black-and-blue M3 mounting screws (two on each side of the drive). NOTE: M3 metric mounting screws can be purchased from HP. When replacing a drive, transfer the four mounting screws from the old drive to the new drive.

  • Page 62: Removing And Installing An M.2 Ssd Storage Card

    Connect the power cable (1) and data cable (2) to the rear of the hard drive. NOTE: If the 2.5-inch hard drive is the primary drive, connect the other end of the data cable to the dark blue SATA connector on the system board labeled SATA0. If it is a secondary hard drive, connect the other end of the data cable to one of the light blue SATA connectors on the system board.
  • Page 63 To install an M.2 SSD card, slide the pins on the card into the system board connector while holding the card at approximately a 30° angle (1). Press the other end of the card down (2), and then secure the card with the screw (3).

  • Page 64: Wlan Module

    WLAN module The WLAN module installs into a connector on the system board. For a list of available WLAN modules, see Boards, cards, and ports on page To remove the WLAN module: Prepare the computer for disassembly (Preparation for disassembly on page Remove the access panel (Access panel on page Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

  • Page 65: Front I/O And Power Switch Assembly

    Front I/O and power switch assembly The front I/O and power switch assembly is attached to the front of the chassis with one screw. Pull the assembly away from the front of the chassis to remove. Prepare the computer for disassembly (Preparation for disassembly on page 19).
  • Page 66 From the front of the computer, remove the Torx T15 screw that secures the assembly to the chassis. NOTE: Chassis color may vary. Rotate the right side of the assembly away from the computer, and then pull the assembly out of the front of the chassis while threading the cables through the hole in the front of the chassis.

  • Page 67: Fan Sink

    Fan sink Two fan sinks are offered – one for 95W processors and one for 65W processors. CAUTION: The bond between the fan sink and the processor may be very tight. If the computer will power on, before removing the fan sink, turn on the computer until it warms the fan sink. Warming the fan sink lessens the bond between the heat sink and the processor, thereby making separating them easier.
  • Page 68 Lift the heat sink from atop the processor. 65W processors 95W processors When reinstalling the fan sink, make sure that its bottom has been cleaned with an alcohol wipe and fresh thermal grease has been applied to the top of the processor. CAUTION: Fan sink retaining screws should be tightened in diagonally opposite pairs (as in an X) to evenly seat the fan sink on the processor.

  • Page 69: Processor

    After installing a new processor onto the system board, update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at: http://h18000.www1.hp.com/support/files. Processor...

  • Page 70: Speaker

    Speaker The speaker is attached to the front of the chassis. Remove it from the inside of the chassis. Prepare the computer for disassembly (Preparation for disassembly on page 19). Remove the access panel (Access panel on page 20). Remove the drive cage (Drive cage on page 28).

  • Page 71: Rear Fan

    Rear fan The rear fan is secured to the rear of the chassis with three Phillips screws. Prepare the computer for disassembly (Preparation for disassembly on page 19). Remove the access panel (Access panel on page 20). Remove the three silver Phillips screws that secure the fan to the rear of chassis. Disconnect the fan control cable (1) from the system board connector labeled CHFAN2.

  • Page 72: Hood Lock (Solenoid)

    Hood lock (solenoid) The hood lock is secured to the rear of the chassis with two screws. Prepare the computer for disassembly (Preparation for disassembly on page 19). Remove the access panel (Access panel on page 20). From the rear of the chassis, remove the two security screws that secure the hood lock. From the inside of the chassis, disconnect the cable from the system board connector labeled HLCK (1).

  • Page 73: Hood Sensor

    Hood sensor The hood sensor is installed on the top, rear of the chassis. Prepare the computer for disassembly (Preparation for disassembly on page 19). Remove the access panel (Access panel on page 20). Disconnect the cable from the system board connector labeled HSENSE (1). Slide the hood sensor out of the slot on the rear of the chassis (2).

  • Page 74: Power Supply

    Power supply For a list of available power supplies, see Computer major components on page The power supply is secured to the rear of the chassis with three screws. Three cables connect the power supply to the system board. Prepare the computer for disassembly (Preparation for disassembly on page 19).
  • Page 75 Disconnect the power supply cables from the following system board connectors: ● PWRCPU ● Power supply...
  • Page 76 Press the release lever at the front of the power supply (1), slide the power supply toward the front of the computer (2), and then lift the power supply out of the chassis. To install the power supply, reverse the removal procedure. Chapter 4 Removal and replacement procedures –...

  • Page 77: Option Board

    Option board For a list of available option boards, see Boards, cards, and ports on page An option board can be installed near the back of the system board that provides an additional connector on the rear I/O panel. NOTE: The image in this section shows a serial port expansion board.

  • Page 78: Antennas

    Antennas The antennas route from the WLAN module to the front and the rear of the computer. To replace the antennas: Prepare the computer for disassembly (Preparation for disassembly on page 19). Remove the access panel (Access panel on page 20).
  • Page 79 From the inside, rear of the computer, press the tab that secures the antenna cover to the computer. From the outside, rear of the computer, rotate the cover up and off the computer. Antennas...
  • Page 80 Remove the Torx T15 screw that secures the antenna to the computer. From inside of the computer, disconnect both antennas from the WLAN module (1). Chapter 4 Removal and replacement procedures – Microtower (MT) chassis...
  • Page 81 Remove both antennas from the tape that secures them to the computer (2), and then thread both antennas through the holes (front and rear) from the inside to outside of the computer (3). Reverse the removal procedure to install the WLAN antennas and transceivers. Antennas...

  • Page 82: System Board

    System board Prepare the computer for disassembly (Preparation for disassembly on page 19). Remove the access panel (Access panel on page 20). When replacing the system board, make sure the following components are removed from the defective system board and installed on the replacement system board: ●...

  • Page 83: System Board Callouts

    System board callouts Sys Bd Label Color Component Sys Bd Label Color Component X4PCIEXP White Expansion card White 6-pin main power X1PCIEXP2 Black Expansion card SPKR White Speaker X1PCIEXP1 Black Expansion card FRONT USB3.0 Blue Front I/O/power switch X16PCIEXP White Expansion card SD RDR Black...
  • Page 84 Sys Bd Label Color Component Sys Bd Label Color Component CHFAN2 Brown Rear fan connector SATA5 Light blue Any SATA Device other than the primary hard drive Black Processor SATA1 Light blue Any SATA Device other than the primary hard drive CPUFAN White...

  • Page 85: Computer Setup (F10) Utility

    Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ● Change settings from the defaults or restore the settings to default values. View the system configuration, including settings for processor, graphics, memory, audio, storage, ●...
  • Page 86 Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the Computer Setup Utilities menu, press Esc. To apply and save changes, select Main > Save Changes and Exit. ●...

  • Page 87: Computer Setup-Main

    Integrated MAC Address System Diagnostics If the hard drive has the HP Advanced Diagnostics installed, the application will launch. If HP Advanced Diagnostics is not installed, then a basic version built into the BIOS will provide the capability to perform the following functions: ●...
  • Page 88 Show test logs ● Language selection Update System BIOS Lets you update the system BIOS from www.hp.com or another network server, from a removable USB drive, or from a file located on the hard drive. Displays current BIOS version information. ●...

  • Page 89: Computer Setup-Security

    Table 5-1 Computer Setup—Main (continued) Option Description Apply Custom Defaults Applies the custom default settings to the computer after rebooting. Does not apply to options in the and Exit Security menu. Apply Factory Defaults Restores the factory system configuration settings to the computer after rebooting. Does not apply to and Exit options in the Security menu.
  • Page 90 Table 5-2 Computer Setup—Security (continued) Option Description Security Configuration TPM Embedded Security TPM Specification Version ● Displays the current TPM version. ● TPM Device Lets you set the Trusted Platform Module as available or hidden. ● TPM State Select to enable the TPM. ClearTPM ●...

  • Page 91: Computer Setup-Advanced

    Table 5-2 Computer Setup—Security (continued) Option Description NOTE: This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. CAUTION: Be aware that these settings take place immediately. A save is not necessary. CAUTION: Be sure to document the DriveLock password.
  • Page 92 Table 5-3 Computer Setup—Advanced (for advanced users) (continued) Option Heading NOTE: If the system is configured to ‘Power On from Keyboard Ports’ (see Power Management Options), then this setting is forced to ‘Power On’. ● Audio Alerts During Boot. Default is enabled. When disabled, most audible beeps from errors, warnings, and password prompts during boot up are suppressed.
  • Page 93 Table 5-3 Computer Setup—Advanced (for advanced users) (continued) Option Heading Controls the virtualization features of the processor. Changing this setting requires turning the computer off and then back on. Default is disabled. Virtualization Technology for Directed I/O (VTd) (Intel only) Controls virtualization DMA remapping features of the chipset.
  • Page 94 Table 5-3 Computer Setup—Advanced (for advanced users) (continued) Option Heading Interrupt B Lets you specify the address. Default is enabled. Lets you disable the following ports (default is enabled): ● SATA connectors ● Front USB ports ● Rear USB ports ●...
  • Page 95 Table 5-3 Computer Setup—Advanced (for advanced users) (continued) Option Heading PCI Express Power Management (enable/disable) Enabling this option permits the PCI Express links to use Active Power State Management (ASPM) to enter lower power states while not in use. Default is enabled. Unique Sleep State Blink Rates (enable/disable) This feature is designed to provide a visual indication of what sleep state the system is in.

  • Page 96: Computer Setup-Uefi Drivers

    Computer Setup—UEFI Drivers Lets you restart the computer into the 3rd Party Option ROM Management application. You can start this application directly by pressing during startup. Recovering the Configuration Settings This method of recovery requires that you first perform the Save to Removable Media command with the Computer Setup (F10) Utility before Restore is needed.

  • Page 97: Troubleshooting Without Diagnostics

    To assist you in resolving problems online, HP Instant Support Professional Edition provides you with self- solve diagnostics. If you need to contact HP support, use HP Instant Support Professional Edition's online chat feature. Access HP Instant Support Professional Edition at: http://www.hp.com/go/ispe.

  • Page 98: Helpful Hints

    If it becomes necessary to call for technical assistance, be prepared to do the following to ensure that your service call is handled properly: Be in front of your computer when you call. ● ● Write down the computer serial number, product ID number, and monitor serial number before calling. ●...

  • Page 99: Solving General Problems

    ● If you have installed an operating system other than the factory-installed operating system, check to be sure that it is supported on the system. ● If the system has multiple video sources (embedded, PCI, or PCI-Express adapters) installed (embedded video on some models only) and a single monitor, the monitor must be plugged into the monitor connector on the source selected as the primary VGA adapter.
  • Page 100 In case of forgotten password, power loss, or computer malfunction, you must manually disable the Smart Cover lock . A key to unlock the Smart Cover Lock is not available from HP. Keys are typically available from a hardware store.
  • Page 101 Poor performance. Cause Solution Low on memory. Add more memory. Hard drive fragmented. Defragment hard drive. Program previously accessed did not release reserved memory Restart the computer. back to the system. Virus resident on the hard drive. Run virus protection program. Too many applications running.
  • Page 102 System does not power on and the LEDs on the front of the computer are not flashing. Cause Solution System unable to power on. Press and hold the power button for less than 4 seconds. If the hard drive LED turns white, then: If equipped with a voltage selector, check that the voltage selector (located on the rear of the power supply) is set to the appropriate voltage.

  • Page 103: Solving Power Problems

    Solving power problems Common causes and solutions for power problems are listed in the following table. Power supply shuts down intermittently. Cause Solution If equipped with a voltage selector, voltage selector switch on Select the proper AC voltage using the selector switch. rear of computer chassis (some models) not switched to correct line voltage (115V or 230V).

  • Page 104: Solving Hard Drive Problems

    Solving hard drive problems Hard drive error occurs. Cause Solution Hard disk has bad sectors or has failed. In Windows 7, click Start, click Computer, and right-click on a drive. Select Properties, and then select the Tools tab. Under Error-checking click Check Now. In Windows 10, type file in the taskbar search box, and then select File Explorer from the list of applications.
  • Page 105 Nonsystem disk/NTLDR missing message. Cause Solution The system is trying to start from the hard drive but the hard Perform Drive Protection System (DPS) testing in system ▲ drive may have been damaged. ROM. System files missing or not properly installed. Insert bootable media and restart the computer.

  • Page 106: Solving Media Card Reader Problems

    Solving media card reader problems Media card will not work in a digital camera after formatting it in Windows. Cause Solution By default, Windows will format any media card with a capacity Either format the media card in the digital camera or select FAT greater than 32MB with the FAT32 format.

  • Page 107: Solving Display Problems

    After installing the media card reader and booting to Windows, the reader and the inserted cards are not recognized by the computer. Cause Solution The operating system needs time to recognize the device if the Wait a few seconds so that the operating system can recognize reader was just installed into the computer and you are turning the reader and the available ports, and then recognize the media the PC on for the first time.
  • Page 108 Reseat DIMMs. Power on the system. Replace DIMMs one at a time to isolate the faulty module. Replace third-party memory with HP memory. Replace the system board. Blank screen and the power LED flashes Red six times, once every second, followed by a two second pause, and the computer beeps six times.
  • Page 109 Monitor does not function properly when used with energy saver features. Cause Solution Monitor without energy saver capabilities is being used with Disable monitor energy saver feature. energy saver features enabled. Dim characters. Cause Solution The brightness and contrast controls are not set properly. Adjust the monitor brightness and contrast controls.
  • Page 110 “No Connection, Check Signal Cable” displays on screen. Cause Solution Monitor video cable is disconnected. Connect the video cable between the monitor and computer. CAUTION: Ensure that the computer power is off while connecting the video cable. “Out of Range” displays on screen. Cause Solution Video resolution and refresh rate are set higher than what the...

  • Page 111: Solving Audio Problems

    Solution with the synchronization, go to the following Web site, select the appropriate monitor, and download either SP32347 or SP32202: http://www.hp.com/support Graphics card is not seated properly or is bad (some models). Reseat the graphics card. Replace the graphics card.
  • Page 112 Sound does not come out of the speaker or headphones. Cause Solution Audio is hidden in Computer Setup. Enable the audio in Computer Setup: Advanced > Built-in Device Options. The external speakers are not turned on. Turn on the external speakers. The audio device may be connected to the wrong jack.

  • Page 113: Solving Printer Problems

    Line-in jack is not functioning properly. Cause Solution Jack has been reconfigured in the audio driver or application In the audio driver or application software, reconfigure the jack or software. set the jack to its default value. There is no sound or sound volume is too low. Cause Solution The application is set to use a different audio device than...

  • Page 114: Solving Keyboard And Mouse Problems

    Printer will not turn on. Cause Solution The cables may not be connected properly. Reconnect all cables and check the power cord and electrical outlet. Printer prints garbled information. Cause Solution The correct printer driver for the application is not installed. Install the correct printer driver for the application.
  • Page 115 Keyboard commands and typing are not recognized by the computer. Cause Solution CAUTION: When attempting to resume from Sleep date, do not hold down the power button for more than four seconds. Otherwise, the computer will shut down and you will lose any unsaved data.

  • Page 116: Solving Hardware Installation Problems

    Solving Hardware Installation Problems You may need to reconfigure the computer when you add or remove hardware, such as an additional drive or expansion card. If you install a plug and play device, Windows automatically recognizes the device and configures the computer. If you install a non-plug and play device, you must reconfigure the computer after completing installation of the new hardware.

  • Page 117: Solving Network Problems

    DIMM1 or XMM1 must always be installed. DIMM1 must be installed before DIMM2, and DIMM3 must be installed before DIMM4 Replace third-party memory with HP memory. Replace the system board. Solving Network Problems Some common causes and solutions for network problems are listed in the following table. These guidelines do not discuss the process of debugging the network cabling.
  • Page 118 Network status link light never flashes. NOTE: The network status light is supposed to flash when there is network activity. Cause Solution No active network is detected. Check cabling and network equipment for proper connection. Network controller is not set up properly. Check for the device status within Windows, such as Device Manager for driver load and the Network Connections applet within Windows for link status.
  • Page 119 Table 6-2 Solving Network Problems (continued) Diagnostics passes, but the computer does not communicate with the network. Cause Solution To access Control Panel in Windows 7, click Start, and then select Control Panel. To access Control Panel in Windows 10, type control panel in the taskbar search box, and then select Control Panel from the list of applications.

  • Page 120: Solving Memory Problems

    Management Engine (ME) settings). To avoid damage to the DIMMs or the system board, you must unplug the computer power cord before attempting to reseat, install, or remove a memory module. For those systems that support ECC memory, HP does not support mixing ECC and non-ECC memory. Otherwise, the computer will not boot the operating system.

  • Page 121: Solving Cd-Rom And Dvd Problems

    Memory is installed incorrectly or is bad. Reseat DIMMs. Power on the system. Replace DIMMs one at a time to isolate the faulty module. Replace third-party memory with HP memory. Replace the system board. Solving CD-ROM and DVD problems If you encounter CD-ROM or DVD problems, see the common causes and solutions listed in the following table or to the documentation that came with the optional device.
  • Page 122 Drive not found (identified). Cause Solution If this is a newly installed drive, run the Computer Setup utility and try adding a POST delay under Advanced > Power-On Options. The device is attached to a SATA port that has been hidden in Run the Computer Setup utility and ensure Device Available is Computer Setup.

  • Page 123: Solving Usb Flash Drive Problems

    CD-ROM, CD-RW, DVD-ROM, or DVD-R/RW drive cannot read a disc or takes too long to start. Cause Solution CD or DVD disc is dirty. Clean CD or DVD with a CD cleaning kit, available from most computer stores. Windows does not detect the CD-ROM or DVD-ROM drive. Use Device Manager to remove or uninstall the device.
  • Page 124 System will not boot from USB flash drive. Cause Solution Boot order is not correct. Run the Computer Setup utility and change boot sequence in Advanced > Boot Options. Removable Media Boot is disabled in the Computer Setup utility. Run the Computer Setup utility and enable booting to removable media in Advanced >...

  • Page 125: Solving Front Panel Component Problems

    Solving front panel component problems If you encounter problems with devices connected to the front panel, refer to the common causes and solutions listed in the following table. A USB device, headphone, or microphone is not recognized by the computer. Cause Solution Device is not properly connected.
  • Page 126 Unable to connect to the Internet. Cause Solution In the Browsing history section on the General tab, click the Delete button. Select the Cookies check box and click the Delete button. Windows 10: Type control panel in the taskbar search box, and then select Control Panel from the list of applications.

  • Page 127: Solving Software Problems

    ● sure it is supported on the system. If you encounter software problems, see the applicable solutions listed in the following table. Computer will not continue and the HP logo does not display. Cause Solution ROM issue - POST error has occurred.

  • Page 128: Post Error Messages And Diagnostic Front Panel Leds And Audible Codes

    POST error messages and diagnostic front panel LEDs and audible codes This appendix lists the error codes, error messages, and the various indicator light and audible sequences that you may encounter during Power-On Self-Test (POST) or computer restart, the probable source of the problem, and steps you can take to resolve the error condition.
  • Page 129 Control panel message Description Recommended action RTC (real-time clock) battery may need to problem persists, replace the RTC battery. See be replaced. the Removal and Replacement section for instructions on installing a new battery. 008–Microcode Patch Error Processor is not supported by the BIOS. Upgrade BIOS to proper version.
  • Page 130 Control panel message Description Recommended action 00E-Inventory Error during MEBx Execution BIOS information passed to the MEBx resulted Reboot the computer. in a failure. If the error persists, update to the latest BIOS version. If the error still persists, replace the system board.
  • Page 131 Description Recommended action Apply hard drive firmware patch if applicable. (Available at http://www.hp.com/support.) Back up contents and replace hard drive. 302-Hard Disk 2: SMART Hard Drive Detects Hard drive is about to fail. (Some hard drives Determine if hard drive is giving correct...
  • Page 132 Control panel message Description Recommended action 403-Serial Port D Address Conflict Detected Both external and internal serial ports are Remove any serial port expansion cards. assigned to the same resources. Clear CMOS. (See Password security and resetting CMOS on page 125.) Reconfigure card resources and/or run Computer Setup or Windows utilities.

  • Page 133: Interpreting System Validation Diagnostic Front Panel Leds And Audible Codes

    Control panel message Description Recommended action 904-SATA Cabling Error One or more SATA devices are improperly Ensure SATA connectors are used in ascending attached. For optimal performance, the SATA 0 order. For one device, use SATA 0. For two and SATA 1 ports should be used for hard drives devices, use SATA 0 and SATA 1.
  • Page 134 Number of long beeps/blinks Error category BIOS Hardware Thermal System board Patterns of blink/beep codes are determined by using the following parameters: 1 second pause occurs after the last major blink. ● ● 2 second pause occurs after the last minor blink. ●...

  • Page 135: Password Security And Resetting Cmos

    If you lose or forget the password when in stringent security mode, the system can only be reset by System Management Command. This is a way for HP Service and Support to provide a secure method to access the BIOS and command a password reset for a specifically identified unit under the direction of the owner. This scenario may not be covered under warranty.
  • Page 136 Shut down the operating system properly, then turn off the computer and any external devices, and disconnect the power cord from the power outlet. With the power cord disconnected, press the power button again to drain the system of any residual power.

  • Page 137: Clearing And Resetting The Bios

    Clearing and resetting the BIOS The CMOS button resets BIOS settings to default, but does not clear the passwords or affect any of the other Security settings. On Intel systems with advanced manageability features, the CMOS button will also partially unprovision AMT.

  • Page 138: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.
  • Page 139 Select Identify now to let HP automatically detect your product. Select your computer, and then select your operating system. In the Diagnostic section, follow the on-screen instructions to select and download the UEFI version you want. Downloading HP PC Hardware Diagnostics (UEFI) to a USB device 129...

  • Page 140: 10 Backing Up, Restoring, And Recovering

    Use HP Recovery Manager to create HP Recovery media after you successfully set up the computer. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For...

  • Page 141: Using Windows Tools

    HP Recovery media can also be used to customize the system or restore the factory image if you replace the hard drive.

  • Page 142: Restore And Recovery

    130. ● If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not work, you can obtain recovery media for your system from support. See the Worldwide Telephone Numbers booklet included with the computer. You can also find contact information from the HP website.

  • Page 143: Using The Hp Recovery Partition (Select Products Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 144: Changing The Computer Boot Order

    Changing the computer boot order If your computer does not restart in HP Recovery Manager, you can change the computer boot order, which is the order of devices listed in BIOS where the computer looks for startup information. You can change the selection to an optical drive or a USB flash drive.

  • Page 145: Removing The Hp Recovery Partition (Select Products Only)

    Removing the HP Recovery partition (select products only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you will not be able to perform System Recovery or create HP recovery media from the HP Recovery partition.

  • Page 146: Guidelines

    Creating recovery media with HP Recovery Disc Creator HP Recovery Disc Creator is a software program that offers an alternative way to create recovery media. After you successfully set up the computer, you can create recovery media using HP Recovery Disc Creator. This recovery media allows you to reinstall your original operating system as well as select drivers and applications if the hard drive becomes corrupted.

  • Page 147: Performing A System Recovery

    ● Store personal files in the Documents library, and back it up regularly. Back up templates that are stored in their associated directories. ● ● Save customized settings that appear in a window, toolbar, or menu bar by taking a screen shot of your settings.

  • Page 148: Using F11 Recovery Tools (Select Products Only)

    The recovery tool reinstalls the operating system and HP programs and drivers that were installed at the factory. Software not installed at the factory must be reinstalled.

  • Page 149: Using Windows 7 Operating System Media

    Windows 7 operating system DVD to reboot the computer and repair the operating system. To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to http://www.hp.com/support. For worldwide support, go to http://welcome.hp.com/country/us/en/...

  • Page 150: Appendix A Battery Replacement

    The lithium battery is only used when the computer is NOT connected to AC power. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle.
  • Page 151 Slide the replacement battery into position, positive side up. The battery holder automatically secures the battery in the proper position. Type 2 To release the battery from its holder, squeeze the metal clamp that extends above one edge of the battery. When the battery pops up, lift it out (1). To insert the new battery, slide one edge of the replacement battery under the lip of the holder with the positive side up.
  • Page 152 Insert the new battery and position the clip back into place. NOTE: After the battery has been replaced, use the following steps to complete this procedure. Replace the computer access panel. Plug in the computer and turn on power to the computer. Reset the date and time, your passwords, and any special system setups using Computer Setup.

  • Page 153: Appendix B Power Cord Set Requirements

    Power Cord Set Requirements The power supplies on some computers have external power switches. The voltage select switch feature on the computer permits it to operate from any line voltage between 100-120 or 220-240 volts AC. Power supplies on those computers that do not have external power switches are equipped with internal switches that sense the incoming voltage and automatically switch to the proper voltage.

  • Page 154: Country-Specific Requirements

    Country-Specific Requirements Additional requirements specific to a country are shown in parentheses and explained below. Country Accrediting Agency Country Accrediting Agency Australia (1) EANSW Italy (1) Austria (1) Japan (3) METI Belgium (1) CEBC Norway (1) NEMKO Canada (2) Sweden (1) SEMKO Denmark (1) DEMKO...

  • Page 155: Appendix C Statement Of Memory Volatility

    Intel-based and AMD-based system boards contain nonvolatile memory subcomponents as originally shipped from HP, assuming that no subsequent modifications have been made to the system and assuming that no applications, features, or functionality have been added to or installed on the system.
  • Page 156 If a DriveLock password is set, select the Security menu, and scroll down to Hard Drive Utilities under the Utilities menu. Select Hard Drive Utilities, select DriveLock, then uncheck the checkbox for DriveLock password on restart. Select OK to proceed. Select the Main menu, and then select Reset BIOS Security to factory default.

  • Page 157: Nonvolatile Memory Usage

    HP Sure Start only) backup of The content is managed Embedded Controller. critical System solely by the HP Sure Start BIOS code, EC Embedded Controller. firmware, and critical computer configuration data for select...
  • Page 158 Stores Fingerprint reader memory is Only a digitally signed (select products fingerprint programmed by user application can make the only) templates. enrollment in HP call to write to the flash. ProtectTools Security Manager. 148 Appendix C Statement of memory volatility...

  • Page 159: Questions And Answers

    HP has provided options in Computer Setup (BIOS) to allow you to run in legacy BIOS, if required by the operating system. Examples of this requirement would be if you upgrade or downgrade the OS.

  • Page 160: Using Hp Sure Start (Select Models Only)

    BIOS to its previously safe state, without user intervention. Those select computer models ship with HP Sure Start configured and enabled. HP Sure Start is configured and already enabled so that most users can use the HP Sure Start default configuration. The default configuration can be customized by advanced users.

  • Page 161: Specifications

    Specifications TWR Specifications Table D-1 Specifications Item Value Value Chassis 14.4 in 365 mm Height 6.1 in 154 mm Width 14.6 in 370 mm Depth Approximate Weight 21.79 lb 9.86 kg Temperature Range 50° to 95°F 10° to 35°C Operating -22°...

  • Page 162: Appendix D Specifications

    Table D-1 Specifications (continued) Item Value Value 87/90/87% efficient at 20/50/100% load (115V) 87/90/87% efficient at 20/50/100% load (230V) Rated Input Current 250W < 3.2A 500W < 6A DC Output +12.1V Power Supply Fan 70 mm variable speed This system utilizes an active power factor corrected power supply. This allows the system to pass the CE mark requirements for use in the countries of the European Union.
  • Page 163 HP PC Hardware Diagnostics (UEFI) removal and replacement 61 keyboard cleaning 14 using 128 fan sink keyboard keys 15 HP Recovery Disc Creator, using 136 illustrated 5 CD-ROM or DVD problems 111 HP Recovery Manager fan, power supply 15 cleaning...
  • Page 164 125 system 132 removal 52 POST error messages 118 USB flash drive 133 media card reader power cord set requirements using HP Recovery media 131 problems 96 country specific 144 recovery media memory power problems 93 creating 130 installation 25...
  • Page 165 removal and replacement software wireless antennas antennas 68 problems 117 disconnecting 54 fan 61 servicing computer 15 WLAN module front I/O assembly 55 solid-state drives removal 54 heat sink 57 sizes 10 spare part number 54 hood lock 62 speaker hood sensor 63 illustrated 7 option board 67...

This manual is also suitable for:

Elitedesk 880 g3 twr

Table of Contents

Save PDF