Table of Contents
Advertisement
3
Installing the USB Driver for a Windows PC
This section describes how to install the Cisco USB driver software on a PC that is running
Windows 98, Windows 98 Second Edition, Windows Millennium, or Windows 2000. This step is
necessary to establish communications over the USB interface between the PC and the
Cisco CVA122/122E Cable Voice Adapter.
Note The USB driver needs to be installed only when you are using a USB connection with
the Cisco CVA122/122E Cable Voice Adapter. Do not install the USB driver if you are not
using a USB connection.
Step 1
When the Cisco CVA122/122E Cable Voice Adapter is first connected to a PC that is running
Windows 98, Windows 98 Second Edition, Windows Millennium, or Windows 2000, the
following window automatically appears. Click Next to continue. See Figure 9:
Figure 9
Adding a USB Device to Windows
Note The Windows software might not automatically detect the presence of the USB
interface until the Cisco CVA122/122E Cable Voice Adapter completes the registration
process with the cable system and is online. This can take up to five minutes, depending on
the cable network and services purchased from the service provider.
14
Advertisement
Table of Contents
