Periodic maintenance and adjustment
Checking and lubricating the
sidestand
The operation of the sidestand should
be checked before each ride, and the
sidestand pivot and metal-to-metal
7
contact surfaces should be lubricated
if necessary.
WARNING
If the sidestand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the sidestand could contact the
ground and distract the operator, re-
sulting in a possible loss of control.
Recommended lubricant:
Lithium-soap-based grease
EAU23203
Lubricating the swingarm piv-
ots
The swingarm pivots must be lubricat-
ed by a Yamaha dealer at the intervals
specified in the periodic maintenance
and lubrication chart.
Recommended lubricant:
Lithium-soap-based grease
EWA10732
EAUM1653
Checking the front fork
The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
To check the condition
Check the front fork for damage and
excessive oil leakage (XVS650AH), or
the inner tubes for scratches, damage
and excessive oil leakage (XVS650H).
To check the operation
1. Place the vehicle on a level surfa-
2. While applying the front brake,
7-28
ce and hold it in an upright posi-
tion. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over.
[EWA10752]
push down hard on the handle-
bars several times to check if the
front fork compresses and re-
bounds smoothly.
EAU57910