Cisco ASR 903 Installing Manual page 35

Hide thumbs Also See for ASR 903:

Table of Contents

Installing the Cisco ASR 903 Router

Tools and Equipment

• Dual-hole lugs

• Double barrel with inspection hole

• Hole spacing is 5/8 in.

• Lug tab width max 0.46 in.

• Nuts

• PSU can accommodate 10 – 6 AWG

• Number 2 Phillips Screwdriver

Perform the following procedure to install the terminal block.

Step 1

Locate the terminal block on the power supply unit.

Step 2

Flap open the front protective cover on the power supply unit.

Step 3

Use a wire-stripping tool to strip the ends of each of the two wires coming from the DC-input power source as

recommended by the lug manufacturer.

Stripping more than the recommended amount of wire can leave behind exposed wire from the terminal block

Note

after installation.

Cisco ASR 903 and ASR 903U Aggregation Services Router Hardware Installation Guide

Installing the DC Power Supply

Table of Contents