Advertisement
Quick Links
GENERAL INFORMATION
The Code Encryptor 3 (CE3) provides wireless control for
arming/disarming a security system, opening/closing a garage door, and
activating a relay output (ex. turning on a light). The CE3 consists of a
Receiver and wiring harness, remote control keyfob, and a status LED
with optional mounting plate.
The most important factor for range and reliability is the mounting
location of the Receiver. Select a location that is as centrally located as
possible. Keep in mind that the user will want to control the operation of
the garage door from the driveway, and will also expect the use of the
remote for alarm on/off in the area of entry and exit.
Although you can wire the Receiver to the panel, it may reduce labor by
installing the CE3 Receiver at the point of entry and wire it to a nearby
keypad. In most cases this is the garage entry, which will provide an easy
installation for garage door open/close, status indicator, and alarm
controls through the keypad.
IMPORTANT: Do not mount the Receiver module inside the alarm panel
enclosure; it will reduce the reception of the remote keyfob.
Installation Steps
1. Connect the CE3 Receiver to the control panel.
2. Program the CE3:
a. Associate the Receiver with the connected control using Automatic Recognition.
b. Program a user code for the Remote Keyfob.
3. Wire optional features, if used (Status LED, Garage Door Opener, Relay Outputs).
4. Test the System.
CONNECTING THE RECEIVER TO THE CONTROL PANEL
The Receiver can be wired either to the control's terminals
or to a keypad's terminals.
1. Unplug the Receiver from the wire harness.
2. Connect the Red, Black, Yellow and Green wires to the
keypad or control's terminals as shown in the diagram.
NOTE: You can make these connections at the control or
at the keypad itself. If you place the Code Encryptor 3 in
the garage or any other location away from the control,
you may choose to wire the Code Encryptor 3 directly to
the keypad.
Summary of Basic Connections
Wire Color
Connection
Red
Keypad Red or Aux (+)
Black
Keypad Black or Aux (-)
Green
Keypad Green (control Data In)
Yellow
Keypad Yellow (control Data Out)
† not used on GE Caddx NX panels
INSTALLATION AND SETUP GUIDE
†
REMOTE
KEYFOB
WIRE
HARNESS
ALARM PANEL
IN
OUT
AUX
DATA
1
2
3
ARMED
OFF
AWAY
STAY
4
5
6
READY
MAX
TEST
BYPASS
7
8
9
INSTANT
CODE
CHIME
0
#
READY
ADEMCO CE3
Code Encryptor 3
CODE ENCRYPTOR 3
RECEIVER
LED STATUS INDICATOR
Red = Armed
Green = Disarmed
Yellow = Alarm
LED AND
MOUNTING
PLATE
CE3-006-V0
PROGRAM
CODE
BUTTON
ENCRYPTOR 3
RECEIVER
LED
SYSTEM
KEYPAD
CE3-011-V0
Advertisement
Related Manuals for Honeywell ADEMCO CE3 Code Encryptor 3
Summary of Contents for Honeywell ADEMCO CE3 Code Encryptor 3
-
Page 1: General Information
ADEMCO CE3 Code Encryptor 3 INSTALLATION AND SETUP GUIDE GENERAL INFORMATION The Code Encryptor 3 (CE3) provides wireless control for arming/disarming a security system, opening/closing a garage door, and activating a relay output (ex. turning on a light). The CE3 consists of a Receiver and wiring harness, remote control keyfob, and a status LED with optional mounting plate. - Page 2 IMPORTANT: DO NOT USE ANY OF THESE ADDRESS CODES IF YOU ARE USING ONE OF THE ABOVE CONTROLS. Example: If you are using a Honeywell Vista P series control, no keypads can use address 17 because the CE 3 will automatically enroll itself as address 17.
-
Page 3: Panic Mode
WIRING FOR OPTIONAL FEATURES AND APPLICATIONS Summary of Harness Wire Functions Purpose Wire Color Function Keypad Red or Aux (+12VDC) Keypad Black Keypad Black or Aux (–) Connections Green Keypad Green (control Data In); Not Used on GE Caddx NX panels Yellow Keypad Yellow (control Data Out) Purple... -
Page 4: Troubleshooting
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Ê800-04965iŠ 2 Corporate Center Drive, Suite 100 P.O. Box 9040, Melville, NY 11747 Copyright © 2009 Honeywell International Inc. 800-04965 8/09 Rev. C www.honeywell.com/security...