Cisco Catalyst 2960 Command Reference Manual page 346

Hide thumbs Also See for Catalyst 2960:

Table of Contents

show ip igmp snooping groups

This is an example of output from the show ip igmp snooping groups command without any keywords.

It displays the multicast table for the switch.

Switch# show ip igmp snooping groups

-------------------------------------------------------------

This is an example of output from the show ip igmp snooping groups count command. It displays the

total number of multicast groups on the switch.

Switch# show ip igmp snooping groups count

Total number of multicast groups: 2

This is an example of output from the show ip igmp snooping groups dynamic command. It shows

only the entries learned by IGMP snooping.

Switch# show ip igmp snooping groups vlan 1 dynamic

-------------------------------------------------------------

This is an example of output from the show ip igmp snooping groups vlan vlan-id ip-address

command. It shows the entries for the group with the specified IP address.

Switch# show ip igmp snooping groups vlan 104 224.1.4.2

-------------------------------------------------------------

Related Commands

ip igmp snooping

ip igmp snooping vlan mrouter

ip igmp snooping vlan static

show ip igmp snooping

show ip igmp snooping mrouter

Catalyst 2960 Switch Command Reference

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

Gi0/1, Gi0/2

Gi0/1, Fa0/15

Gi0/1, Fa0/15

Enables IGMP snooping on the switch or on a VLAN.

Configures a multicast router port.

Statically adds a Layer 2 port as a member of a multicast group.

Displays the IGMP snooping configuration of the switch or the

Displays IGMP snooping multicast router ports for the switch or

for the specified multicast VLAN.

Show Quick Links

Table of Contents