Cisco Catalyst 2960 Command Reference Manual page 302
Hide thumbs
Also See for Catalyst 2960:
- Configuration manual (2288 pages) ,
- Software configuration manual (980 pages) ,
- Command reference manual (800 pages)
Table of Contents
Advertisement
show controllers ethernet-controller
Table 2-19
Receive Field Descriptions (continued)
Field
System FCS error frames
RxPortFifoFull drop
frames
1. FCS = frame check sequence
2. MTU = maximum transmission unit
This is an example of output from the show controllers ethernet-controller phy command for a specific
interface.
Switch# show controllers ethernet-controller gigabitethernet0/2 phy
GigabitEthernet0/2 (gpn: 2, port-number: 2)
-----------------------------------------------------------
============================================================
Port
------- ------------ ------------ --------------------------
Gi0/1
Gi0/2
============================================================
Other Information
-------------------------------------------------------
Port asic num
Port asic port num
XCVR init completed
Embedded PHY
SFP presence index
SFP iter cnt
SFP failed oper flag
IIC error cnt
IIC error dsb cnt
IIC max sts cnt
Chk for link status
Link Status
<output truncated>
This is an example of output from the show controllers ethernet-controller port-asic configuration
command:
Switch# show controllers ethernet-controller port-asic configuration
========================================================================
Switch 1, PortASIC 0 Registers
------------------------------------------------------------------------
DeviceType
Reset
PmadMicConfig
PmadMicDiag
SupervisorReceiveFifoSramInfo
SupervisorTransmitFifoSramInfo
GlobalStatus
IndicationStatus
IndicationStatusMask
InterruptStatus
InterruptStatusMask
SupervisorDiag
SupervisorFrameSizeLimit
SupervisorBroadcast
GeneralIO
Catalyst 2960 Switch Command Reference
2-274
Description
The total number of frames received on an interface that have a valid length (in bytes) but that do
not have the correct FCS values.
The total number of frames received on an interface that are dropped because the ingress queue
is full.
Conf-Media
Active-Media Attached
auto-select
none
auto-select
none
: 0
: 1
: 0
: not present
: 0
: 2564163d
: 0x00000000
: 0
: 0
: 0
: 1
: 0
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
0 -Not Present
0 -Not Present
: 000101BC
: 00000000
: 00000001
: 00000003
: 000007D0 000007D0 40000000
: 000001D0 000001D0 40000000
: 00000800
: 00000000
: FFFFFFFF
: 00000000
: 01FFE800
: 00000000
: 000007C8
: 000A0F01
: 000003F9 00000000 00000004
78-16882-01
Hide quick links:
Advertisement
Table of Contents
