1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.
2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.
3 Service Navigation 3.1. PCB Layout Board Name Function Board Name Function Power Supply Data Driver (Lower Right) Non serviceable. Data Driver (Lower Left) P-Board should be exchange for service. Scan Drive Main AV input, processing Sustain Drive Remote receiver, Power LED, C.A.T.S sensor Power switch 3D Eyewear transmitter...
4 Specifications Power Source AC 120 V, 60 Hz Power Consumption Rated Power Consumption 295 W Standby condition 0.2 W Plasma Display panel Drive method AC type Aspect Ratio 16:9 Visible screen size 42 inch class (41.6 inches measured diagonally) (W ×...
Page 9
*Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.
5 Technical Descriptions 5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine 5.1.1. General information: 1. EEPROM (IC8902) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for CinemaNow. 2. The final KEY data will be generated by Peaks IC (IC8000) when SELF CHECK was done and are stored in both Peaks IC (IC8000) and EEPROM (IC8902).
6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds Note: Service Mode can not be entered when 3D signal input.
Contents of adjustment mode 6.1.4. • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...
6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.
6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Input Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched on.
6.5. Data Copy by SD Card 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to SD card and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to SD card and then copy to other TVs.
Page 16
6.5.3. Data copy from TV set to SD Card 1. Turn on the TV set. 2. Insert SD card with a startup file (pwd file) to SD slot. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to SD card.
Page 17
6.5.4. Data copy from SD Card to TV set 1. Turn on the TV set. 2. Insert SD card with Data to SD slot. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from SD card to TV set.
7 Troubleshooting Guide Use the self-check function to test the unit. 1. Checking the IIC bus lines 2. Power LED Blinking timing 7.1. Check of the IIC bus lines 7.1.1. How to access 7.1.1.1. Self-check indication only: Produce TV reception screen, and while pressing [VOLUME ( - )] button on the main unit, press [OK] button on the remote control for more than 3 seconds.
7.2. Power LED Blinking timing chart 1. Subject Information of LED Flashing timing chart. 2. Contents When an abnormality has occurred the unit, the protection circuit operates and reset to the stand by mode. At this time, the defective block can be identified by the number of blinks of the Power LED on the front panel of the unit. Blinking Times Contents Check point...
8 Disassembly and Assembly Instructions 8.1. Remove the Rear cover 8.4. Remove Side terminal cover 1. See PCB Layout (Section 3) 8.2. Remove the AC inlet 1. Remove the screws (×2 2. Remove the Side terminal cover. Caution: To remove P.C.B. wait 1 minute after power was off for dis- charge from electrolysis capacitors.
8.6. Remove the A-Board 3. Remove the screws (×2 4. Disconnect the connector. 1. Remove the Tuner unit. (See section 8.5.) 5. Remove the Side unit assy from the Side unit metal. 2. Remove the screws (×2 ) and remove the A-Board. 8.8.
8.10. Remove the SS-Board 8.12. Remove the C1-Board 1. Remove the Tuner unit. (See section 8.5.) 1. Remove the Stand bracket. (See section 8.11.) 2. Disconnect the connector (SS11). 2. Disconnect the flexible cables (CB1, CB2, CB3, CB4, 3. Disconnect the flexible cable (SS33). CB5, CB6 and CB7).
8.15. Remove the S-Board 2. Remove the Contact metal bottom B. (See section 8.16.) 3. Remove the screws (×6 1. Remove the screws (×2 ) and remove the S-Board unit. 2. Remove the screws (×2 3. Disconnect the connector (S10) and remove the S-Board from the Power button bracket.
8.19. Remove the K-Board 1. Remove the Contact metal bottom B. (See section 8.16.) 2. Remove the screws (×2 3. Remove the claw (×1 4. Disconnect the connector (K1) and remove the K-Board from the LED Panel. 8.20. Remove the V-Board 1.
9 Measurements and Adjustments 9.1. Adjustment 9.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.
Page 28
9.1.2. RF video sub contrast adjustment Instrument Name Remarks 1. REMOTE TRANSMITTER 2. RF analog signal (Sprit color bar. The pattern for adjustment must contain 100% white part.) Adjustment or Inspection Procedure Remarks 1. Receive the sprit color bar with RF analog signal. (ASPECT FULL, Picture menu: Vivid) 2.
4. Push [5] key of remote controller to display window pattern. 5. Confirm the brightness. The following is the confirmation value. TC-P42ST30 82cd/m2 or more 6. Set [R-CUT] [G-CUT] [B-CUT] the values written in table 1. 7. Attach the sensor of color analyzer to the center of window pattern.
10 Block Diagram 10.1. Main Block Diagram MAIN AV INPUT,PROCESSING HDMI1-3 (HDMI1) ETHERNET DATA TMDS DATA LAN CON I/F ETHERPHY HDMI I/F SIF_OUT SIF I/F SD CARD DATA SD CARD I/F SD CARD IFD_OUT TUNER TUNER I/F USB I/F USB_1,2 PEAKS-LDA3 DDR3 I/F DDR3...
10.3. Block (2/4) Diagram MAIN AV INPUT,PROCESSING IC9300 VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA Sub Filed Processor P+3.3V P+1.1V IC9860 P+3.3V P+3.3V F15V KEY1 KEYSCAN P+1.1V +1.1V 1.1V SOS8_SS SOS8_SS P+3.3V IIC0 +3.3V 3.3V DATA DRIVER CONTROL IC9820...
11 Wiring Connection Diagram 11.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 11.2. Wiring (1)
Page 84
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks TXN/A1PEUUS CIRCUIT BOARD A 1 (RTL)PAVCA 1 PAVCA TXN/P1PKUUS CIRCUIT BOARD P TXNC11PKUU CIRCUIT BOARD C1 1 (RTL)PAVCA TXNC21PKUU CIRCUIT BOARD C2 1 (RTL)PAVCA...
Page 85
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C4810 F1G1A105A047 C 1UF 10V C4811 F1G1A105A047 C 1UF 10V C4816 F1G1C104A077 C 0.1UF 16V C4817 F1G1C104A077 C 0.1UF 16V C4820 F1G1H101A565 C 100PF 50V...
Page 86
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C5911 F1J1A106A043 C 10UF, 10V C5912 F1G1E472A086 C 4700pF 25V C5913 F1G1A473A032 C0.047UF, 10V C5915 F1G1A473A032 C0.047UF, 10V C5917 F1G1A473A032 C0.047UF, 10V C5919 F1G1A473A032 C0.047UF, 10V...
Page 87
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8122 F1J0G2260001 C 22 UF 4 V C8124 F1J0G2260001 C 22 UF 4 V C8126 F1J0G2260001 C 22 UF 4 V C8128 F1J0G2260001 C 22 UF 4 V...
Page 88
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C8707 F1G1C223A081 C 0.022UF, 16V C8708 F1J1A106A043 C 10UF, 10V C8709 F1J1A106A043 C 10UF, 10V C8711 F1G1A333A032 C0.033UF, 10V C8712 F1G1H5610004 C 560 pF 50 V...
Page 89
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C9868 F1J0G2260001 C 22 UF 4 V C9869 F1J1A106A043 C 10UF, 10V C9871 F1J0G2260001 C 22 UF 4 V C9872 F1H1C105A145 C 1 uF 16 V...
Page 90
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16191 F1K1E475A134 C 4.7UF 25V C16192 F1H1C105A145 C 1 uF 16 V C16193 F2A1E470B725 E 47UF, 25V 1 PAVCA C16195 F1K1E105A029 C 1UF, 25V...
Page 91
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C16692 F1H1H104A970 C 0.1UF, , 50V C16723 F1K1E105A029 C 1UF, 25V C16724 F1K1E475A134 C 4.7UF 25V C16753 F1K1E475A134 C 4.7UF 25V C16770 F1H1C105A145 C 1 uF 16 V...
Page 92
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks C17211 ECJ1VB1A105K C 1UF, 10V C17212 ECJ1VB1A105K C 1UF, 10V C17213 ECJ1XB1C104K C 0.1UF, Z, 16V C17214 ECJ1XB1C104K C 0.1UF, Z, 16V C17226 F1K2A224A033 C 0.22UF, 100V...
Page 93
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D14853 B0ECKM000046 DIODE D14902 B0ACCJ000048 DIODE D14903 B0ACCJ000048 DIODE D14904 B0ADCJ000100 DIODE D16001 B0ECLP000010 DIODE 1 PAVCA D16002 B0ECLP000010 DIODE 1 PAVCA D16021 B0ECLP000010...
Page 94
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks D16645 DZ2J150M0L ZENER DIODE D16646 DZ2J150M0L ZENER DIODE D16647 DZ2J150M0L ZENER DIODE D16648 DZ2J043M0L ZENER DIODE D16651 DZ2J051M0L ZENER DIODE D16652 B0ECKP000055 DIODE D16662 DZ2J150M0L...
Page 95
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks IC8902 TVRS036S 1 PAVCA IC9300 C1AB00003461 1 PAVCA IC9304 TVRS063AES 1 PAVCA IC9400 C0JBAU000089 1 PAVCA IC9401 C0JBAU000089 1 PAVCA IC9402 C0JBAU000089 1 PAVCA...
Page 96
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks JK4601 K1FY119D0017 CONNECTOR 1 PAVCA JK4602 K1FY119E0030 CONNECTOR 1 PAVCA JK8532 K1FY104B0065 CONNECTOR 1 PAVCA JK8533 K1FY104B0065 CONNECTOR 1 PAVCA JK8650 K1NA12E00016 12P CONNECTOR...
Page 97
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks PC16131 B3PBE0000058 1 PAVCA PC16191 B3PBE0000060 1 PAVCA PC16251 B3PBA0000580 1 PAVCA PC16301 B3PBA0000580 1 PAVCA PC16461 B3PBE0000058 1 PAVCA PC16462 B3PBE0000060 1 PAVCA...
Page 98
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks Q16606 DSC2001S0L TRANSISTOR Q16607 B1CBGD000001 Q16621 B1JBDN000004 TRANSISTOR 1 PAVCA Q16622 B1JBDN000004 TRANSISTOR 1 PAVCA Q16646 DSA2001S0L TRANSISTOR Q16647 B1CBGD000001 Q16660 B1CFRQ000021 1 PAVCA...
Page 99
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R3209 D1BB75R0A055 M 75 OHM,J.1/10W R3750 D0GA103JA015 M 10KOHM,J,1/16W R4512 D0GA220JA023 M22 OHM, J.1/16 W R4513 D0GA151JA023 M 150 OHM, J,1/16W R4514 D0GA151JA023 M 150 OHM, J,1/16W...
Page 100
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R5010 D0GA222JA023 M 2.2KOHM, J,1/16W R5011 D0GA104JA023 M100KOHM, J.1/16 W R5012 D0GA223JA023 M 22K OHM J 1/16W R5013 D0GA103JA015 M 10KOHM,J,1/16W R5018 D0GA473JA015 M 47KOHM, J,1/16W...
Page 101
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8219 EXB28V220J M 22 OHM 1/32 W R8220 EXB28V220J M 22 OHM 1/32 W R8221 EXB28V220J M 22 OHM 1/32 W R8222 EXB28V220J M 22 OHM 1/32 W...
Page 102
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8655 D0GA560JA023 M 56 OHM, J,1/16W R8656 D0GA560JA023 M 56 OHM, J,1/16W R8657 D0GA560JA023 M 56 OHM, J,1/16W R8658 D0GA560JA023 M 56 OHM, J,1/16W...
Page 103
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R8959 D0GA272JA023 M 2.7KOHM, J.1/16W R8960 D0GA272JA023 M 2.7KOHM, J.1/16W R8961 EXB28V332J M 3.3 KOHM 1/32 W R8967 D0GA102JA023 M1KOHM, J.1/16 W R8968 D0GA473JA015...
Page 104
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R14920 D0GD470JA052 M 47 OHM,J,1/8W 1 PAVCA R14921 EXB38V220JV M 22 OHM 1/16 W R14922 EXB38V220JV M 22 OHM 1/16 W R14923 EXB38V220JV M 22 OHM 1/16 W...
Page 105
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16285 EXB38V623J M 62 kOHM 1/16 W R16289 D0GF334JA047 M 330KOHMJ,1/3W R16290 D0GF334JA047 M 330KOHMJ,1/3W R16307 D1BD5232A077 M52.3KOHM,D.1/10W 1 PAVCA R16309 ERG2FJS473D M 47KOHM, J, 2W...
Page 106
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16563 EXB38V470J M 47 OHM 1/16 W R16564 EXB38V470J M 47 OHM 1/16 W R16565 EXB38V472JV M 4.7 kOHM 1/16 W R16566 EXB38V472JV M 4.7 kOHM 1/16 W R16567 EXB38V472JV M 4.7 kOHM 1/16 W...
Page 107
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R16763 D0GB473JA065 M 47KOHM J. 1/10W 1 PAVCA R16772 D0GB472JA065 M 4.7KOHM, J,1/10W R16773 D0GD102JA052 M 1.0KOHM,J,1/4W 1 PAVCA R16776 D0GD470JA052 M 47 OHM,J,1/8W...
Page 108
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17106 D1BB49R90002 M 49 OHM,J.1/10W R17107 D1BB49R90002 M 49 OHM,J.1/10W R17108 D1BB49R90002 M 49 OHM,J.1/10W R17109 D0GZ1R0JA020 M 1 OHM, J,1/2W R17111 D0GZ1R0JA020 M 1 OHM, J,1/2W...
Page 109
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks R17227 D0GZ1R0JA020 M 1 OHM, J,1/2W R17229 D0GZ1R0JA020 M 1 OHM, J,1/2W R17231 D0GZ1R0JA020 M 1 OHM, J,1/2W R17233 D0GB681JA065 M 680 OHM,J,1/10W 1 PAVCA...
Page 110
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks ZA16002 K4AZ01D00004 TERMINAL ZA16401 K4AZ01D00004 TERMINAL ZA16402 K4AZ01D00004 TERMINAL ZA17101 K4CD01000013 AV TERMINAL ZA17102 K4CD01000013 AV TERMINAL ZA17103 K4CD01000013 AV TERMINAL ZA17104 K4CD01000013 AV TERMINAL...
Page 111
Model No. : TC-P42ST30 Exploded View 1 S-67...
Page 112
Model No. : TC-P42ST30 Exploded View 2 S-68...
Page 113
Model No. : TC-P42ST30 Accessories S-69...
Page 114
Model No. : TC-P42ST30 Parts List Ref. Safety Part No. Part Name & Description Q'ty Remarks 10030-0061200 BATTERY COVER 1 PAVCA K0RB00600022 SIDE BUTTON UNIT 1 PAVCA K2AHYH000043 AC INLET WITH CABLE 1 PAVCA K2CG3YY00060 AC CORD(USA) 1 PAVCA K2KYYYY00150...