Configuring Anycast Gateway For Vxlan Routing; Configuring The Nve Interface And Vnis - Cisco Nexus 9000 Series Configuration Manual
Nx-os vxlan
Hide thumbs
Also See for Nexus 9000 Series:
- Configuration manual (562 pages) ,
- Troubleshooting manual (126 pages) ,
- Quick start configuration manual (6 pages)
Table of Contents
Advertisement
Configuring VXLAN BGP EVPN
Procedure
Step 1
Step 2
Configuring Anycast Gateway for VXLAN Routing
Procedure
Step 1
Step 2
Configuring the NVE Interface and VNIs
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Command or Action
vrf context vxlan
vni number
Command or Action
fabric forwarding
anycast-gateway-mac address
fabric forwarding mode
anycast-gateway
Command or Action
interface nve-interface
host-reachability protocol bgp
member vni vni associate-vrf
member vni vni
mcast-group address
Cisco Nexus 9000 Series NX-OS VXLAN Configuration Guide, Release 7.x
Configuring Anycast Gateway for VXLAN Routing
Purpose
Create a VXLAN Tenant VRF
Configure Layer 3 VNI under VRF.
Purpose
Configure distributed gateway virtual MAC address
One virtual MAC per
Note
VTEP
All VTEPs should have the same virtual MAC
Note
address
Associate SVI with anycast gateway under VLAN
configuration mode.
Purpose
Configure the NVE interface.
This defines BGP as the mechanism for host
reachability advertisement
Add Layer-3 VNIs, one per tenant VRF, to the
overlay.
Required for VXLAN routing
Note
only.
Add Layer 2 VNIs to the tunnel interface.
Configure the mcast group on a per-VNI basis
63
- Quick Links:
- Configuring Vxlan
- Configuring Q-In-Vni
Hide quick links:
Advertisement
Table of Contents
