Removing The Rear Cover Sensor Unit; Connector Connecting Status; Tabs Securing Rear Cover Sensor - Epson Stylus Pro 4400 Service Manual

Hide thumbs Also See for Stylus Pro 4400:

Table of Contents

EPSON Stylus Pro 4400/4450/4800/4880/4880C

4.2.3.9 Rear Cover Sensor

Remove "Paper Guide Assy., M, SP" (p215).

2. Remove the screw securing "Rear Cover Sensor Unit" to the printer frame.

(Refer to Figure 4-27.)

C.B.B. 2x10:

3. Release the tab securing the "Rear Cover Sensor Unit" to the printer frame

and remove "Rear Cover Sensor Unit".

4. Disconnect the connector from the "Rear Cover Sensor".

(Refer to Figure 4-28.)

5. Release the two tabs securing the "Rear Cover Sensor" to the holder and

then remove the "Rear Cover Sensor".

Rear Cover Sensor Unit

Figure 4-27. Removing the Rear Cover Sensor Unit

Disassembly & Assembly

(Refer to Figure 4-27.)

(Refer to Figure 4-29.)

Disassembly Procedures

Rear Cover Sensor

Figure 4-28. Connector Connecting Status

Figure 4-29. Tabs Securing Rear Cover Sensor

Show Quick Links

Table of Contents

Troubleshooting