Removing Switches From A Site; Configuring Clusters; Adding A New Cluster - Cisco MDS 9000 series Configuration Manual
I/o accelerator
Hide thumbs
Also See for MDS 9000 series:
- Command reference manual (1464 pages) ,
- Configuration manual (344 pages) ,
- Troubleshooting manual (161 pages)
Table of Contents
Advertisement
Chapter 5
Configuring IOA Using Fabric Manager
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
In the navigation pane, click Sites.
Step 1
Select the switches that you want to add from the Unassigned Switches table.
Step 2
Click Add, and then click Apply.
Step 3
Removing Switches from a Site
To remove a switch from a site, follow these steps:
Step 1
In the navigation pane, click Sites.
You see the IOA Manager window as shown in
Figure 5-10
Step 2
Click to select the switches you want to remove from Assigned Switches table.
Step 3
Click Remove, and then click Apply.
Configuring Clusters
You can select a cluster to see the details in the information pane. The upper table in the information
pane displays the members of a named cluster, and the table below displays the statistical information
about the cluster's active IOA interfaces.
Adding a New Cluster
To create a new cluster using IOA Manager, follow these steps:
OL-20708-01, Cisco MDS NX-OS Release 5.0(1a)
Removing Switches from a Site Using IOA Manager
Cisco MDS 9000 Family I/O Accelerator Configuration Guide
Figure
5-10.
Configuring Clusters
5-7
Advertisement
Table of Contents
