Removing A Lower Fan Tray Assembly - Cisco ASR 5000 Installation Manual
Hide thumbs
Also See for ASR 5000:
- Administration manual (466 pages) ,
- Installation manual (37 pages) ,
- Installation procedure (8 pages)
Table of Contents
Advertisement
Replacing Upper or Lower Fan Tray
Removing a Lower Fan Tray Assembly
Follow the instructions below to remove a lower fan tray assembly from the chassis.
Step 1
Unsnap the plastic bezel from the lower-front of the chassis by placing your fingers in the notches on its sides and pulling
it toward you.
Step 2
Use a Phillips #1 screwdriver to loosen the four captive screws that hold the fan tray cover/EMI shield in place. Pull the
cover away from the chassis. Do NOT use an electric or pneumatic torque driver to loosen these screws.
Step 3
Pull the fan tray toward you with the handle cut-out on the front of the fan tray assembly. The fan tray assembly should
easily slide out of the chassis.
Removing a Lower Fan Tray Assembly
ASR 5000 Installation Guide
209
Advertisement
Table of Contents
