Strand Mounting Using Smk2 - Cisco Aironet 1570 Series Installation Manual
Outdoor
Hide thumbs
Also See for Aironet 1570 Series:
- Ordering manual (17 pages) ,
- Hardware installation manual (10 pages) ,
- Mounting (52 pages)
Table of Contents
Advertisement
Strand Mount Kit 2
Figure 3-4
AP Mounted Using SMK2 - Dimensions in inches [and millimeters]
Strand Mounting Using SMK2
When mounting the access point on a cable strand where you need to accommodate a cable bundle also,
you must use SMK2 strand mount kit.
Note
The access point must be installed on a cable strand by a professional cable installer.
Table 3-2
Table 3-2
Material Needed
SMK2 strand mount kit
Four M8 x16mm button-head bolts, and its washers
5 mm hex wrench
13 mm box-end wrench
To mount the access point, follow these steps:
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
3-10
61.6
2.42
200.7
7.90
lists the materials you need to strand mount the AP using SMK2.
Materials Needed to Mount the AP using SMK2
Chapter 3
Mounting the Access Point
In Kit?
Yes
Yes
No
No
OL-32138-01
Advertisement
Table of Contents
