Related Manuals for Huawei 9000
Summary of Contents for Huawei 9000
- Page 1 7150033 HUAWEI 9000 HD Video Terminal Touch Panel V100R011 User Guide Issue Date 2012-04-30 HUAWEI TECHNOLOGIES CO., LTD.
- Page 2 Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS"...
-
Page 3: About This Document
HUAWEI 9000 HD Video Terminal Touch Panel User Guide About This Document About This Document Related Documentation Document Describes... Document Location HUAWEI 9000 HD Video Operating the Huawei 9000 l Provided along with the Terminal User Guide high-definition (HD) video HD video terminal. - Page 4 One of the participating sites in a conference. It cannot be the local site. User Interface Users can control the HUAWEI 9000 video terminal from one of three user interfaces. User interface controlled by the remote control Web interface Touch panel user interface Unless otherwise stated, the user interface described in the document is the touch panel user interface.
-
Page 5: Table Of Contents
HUAWEI 9000 HD Video Terminal Touch Panel User Guide Contents Contents About This Document........................ii 1 Overview............................1 2 Using the Touch Panel........................2 2.1 Appearance of the Touch Panel..........................2 2.2 Powering On the Touch panel..........................2 2.3 Using the Touch Panel............................2 2.4 Setting Connection Parameters...........................3 2.5 Home Screen Buttons............................5... - Page 6 HUAWEI 9000 HD Video Terminal Touch Panel User Guide Contents 4.3 Saving a Camera Preset............................22 4.4 Switching Between Screen Layouts.........................23 4.5 Viewing Continuous Presence..........................24 5 Controlling What You Hear.......................26 5.1 Adjusting the Volume............................26 5.2 Muting the Microphone............................26 6 Upgrading Software........................27...
-
Page 7: Overview
1 Overview Overview The HUAWEI 9000 HD Video Terminal Touch Panel (touch panel for short) is provided with the HUAWEI 9000 HD Video Terminal (terminal for short). Huawei's dedicated conference control software (Huawei Telepresence) comes pre-installed on the touch panel. After you wirelessly connect the touch panel to the terminal, Huawei Telepresence enables you to initiate and control conferences. -
Page 8: Using The Touch Panel
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 2 Using the Touch Panel Using the Touch Panel 2.1 Appearance of the Touch Panel Figure 2-1 shows the touch panel. Figure 2-1 Touch Panel 1. Power key 2. Volume Up/Down key (not used for 3. -
Page 9: Setting Connection Parameters
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 2 Using the Touch Panel Tap: Use your finger to touch an item on the touch panel, and remove your finger quickly from the screen. Tap and hold: Use your finger to touch an item on the touch panel, and continue to touch the item for at least 2 seconds. - Page 10 Step 4 Tap Save to save the parameter settings. ----End Follow-up Procedure Once connected successfully to the terminal, the touch panel displays the Huawei telepresence home screen, as shown in Figure 2-2. For future connections, you do not need to set connection parameters.
-
Page 11: Home Screen Buttons
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 2 Using the Touch Panel Figure 2-2 Huawei telepresence home screen 3. Conference Schedules list 1. Task bar 2. Screen layout 4. Shortcut bar control area Change the connection settings, and you can connect the touch panel to another terminal. To change the settings, tap in the task bar and choose Settings >... -
Page 12: Setting The Language
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 2 Using the Touch Panel Button Description Button Description Displays or hides the shortcut Exits or ends a bar. conference. 2.6 Setting the Language Use the touch panel to change the telepresence system's user interface language. The change takes effect without a system restart. -
Page 13: Waking Up The Touch Panel
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 2 Using the Touch Panel Table 2-3 Security parameters Parameter Description Current password In this field, enter the current password. By default, no password is set. New password Enter a new password. This new password is required to access Advanced Settings. - Page 14 HUAWEI 9000 HD Video Terminal Touch Panel User Guide 2 Using the Touch Panel to call the administrator. This function is available only when the terminal has a PSTN- E1 interface card inserted and the HELPDESK number parameter configured. NOTE To set HELPDESK number, choose System Settings >...
-
Page 15: Experiencing A Conference
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Experiencing a Conference 3.1 Answering a Call There are two modes for the terminal and the touch panel to answer incoming calls. You can configure the terminal or touch panel to answer incoming calls in one of the following ways: The touch panel prompts you to answer the calls manually. - Page 16 HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Parameter Description Rate Specifies the conference bandwidth. To call a Cisco TelePresence site, the value of this parameter must be greater than 1.5 Mbit/s. Call type Specifies the line type used to call a site.
-
Page 17: Initiating A Conference
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Parameter Description Answer mode Specifies how the terminal answers incoming calls. l Manual: The touch panel prompts you to answer the calls manually. l Auto: The terminal answers incoming calls automatically. -
Page 18: Initiating A Conference From The Keypad Screen
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Step 2 Use any of the following methods to initiate a conference: Tap the Sites tab, select one or more sites, and tap Tap the Local Groups tab, select a group, and tap... -
Page 19: Joining A Conference Quickly
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Procedure Step 1 From the Call screen, tap the Conference History tab. Step 2 Select a conference entry and tap to start the conference. NOTE If the selected entry is a multipoint conference, the conference starts only when it was initiated using the local terminal. - Page 20 HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Conference controls available to non-chair sites: Request chair and Request floor Conference controls available to chair sites: Release Chair, In Turn, Add Site, and Extend conference Table 3-3 describes the conference controls.
-
Page 21: Controlling A Site
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Step 2 Tap the desired option to perform the corresponding operation. ----End Example If the local site is chairing the conference, tap Release Chair to release the chair control rights. -
Page 22: Customizing Conference Controls
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Button Label Description Disconnect Site Disconnects the site from the conference. Delete Site Removes the disconnected site from the site list. Call Site Calls the absent site to join the conference. -
Page 23: Controlling Captions
Controls. Context Captions can be created, edited, and deleted from the terminal's web interface or user interface controlled by the remote control. For details, see the HUAWEI 9000 HD Video Terminal Administrator Guide. Procedure Step 1 During a multipoint conference, tap More from the home screen to display the conference... -
Page 24: Using Two-Stage Dialing
The local site is in a multipoint conference that supports network recording. Check this with the system administrator. The multipoint conference is hosted by a stand-alone MCU (such as the HUAWEI ViewPoint 8660 MCU), and the local site is chairing the conference. -
Page 25: Sharing A Presentation
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Step 3 Tap More from the home screen and tap Keypad. Follow the IVR instructions to select a language and enter the password (if any) to join a conference. - Page 26 HUAWEI 9000 HD Video Terminal Touch Panel User Guide 3 Experiencing a Conference Leaving a Conference When a site leaves the conference, the conference continues. During a multipoint conference, in the task bar. If you are not the chair or conference coordinator, leave the conference as prompted.
-
Page 27: Controlling What You See
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 4 Controlling What You See Controlling What You See 4.1 Selecting Video Sources Use the touch panel to set the video and presentation sources for the local site. Procedure Step 1 Tap in the task bar to display the main menu and tap tittle_videochoose. -
Page 28: Saving A Camera Preset
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 4 Controlling What You See Button Description Select the remote camera. select video input sources. Pans or tilts the camera. Camera presets. You can save 30 presets for the local camera and six presets for a remote camera. -
Page 29: Switching Between Screen Layouts
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 4 Controlling What You See Procedure Step 1 Tap in the task bar to display the main menu and tap Control Camera. Step 2 With the camera in the desired position, tap and hold an unused number for about 3 seconds to save the preset. -
Page 30: Viewing Continuous Presence
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 4 Controlling What You See you can enable the presentation, local video, and remote video to be displayed in three panes. Figure 4-1 Switching between screen layouts In PiP, four small frames are displayed on the touch panel user interface. Tap a frame to allow the small window in PiP to be displayed in the corresponding location on the monitor. - Page 31 HUAWEI 9000 HD Video Terminal Touch Panel User Guide 4 Controlling What You See Step 2 Tap a continuous presence entry. Step 3 Tap View Site displayed above the entry. ----End Follow-up Procedure During multipoint conferences, chair sites can also broadcast continuous presence. To broadcast continuous presence, tap a continuous presence entry and tap Broadcast Site displayed above the entry.
-
Page 32: Controlling What You Hear
HUAWEI 9000 HD Video Terminal Touch Panel User Guide 5 Controlling What You Hear Controlling What You Hear 5.1 Adjusting the Volume You can use the touch panel to adjust the local speaker volume. Changing the volume affects only the sound you hear at your site. -
Page 33: Upgrading Software
When a new version is available, the touch panel will prompt you to replace the existing application. Follow the onscreen instructions to upgrade the software. Step 3 On the Huawei telepresence installation screen,select the upgrade file that has been downloaded to the touch panel and tap Intall. - Page 34 HUAWEI 9000 HD Video Terminal Touch Panel User Guide 6 Upgrading Software Follow-up Procedure To view the current software version for the touch panel, tap in the task bar and choose Settings > General Settings > Local Basic. Issue 01 (2012-04-30) Huawei Proprietary and Confidential Copyright ©...