Zone And Room Number Assignments - LG 32LX570H Commercial Mode Setup Manual
Hide thumbs
Also See for 32LX570H:
- Owner's manual (44 pages) ,
- Setup manual (29 pages) ,
- Easy setup manual (27 pages)
Table of Contents
Advertisement
EZ-Manager Wizard (Cont.)
Zone and Room Number Assignments
You may complete one or more of the fields in the Zone, Label, and Room Number screen or leave
them at their default settings (Zone) or blank (Label and Room Number), as desired; however, if you
intend to use the Zoning feature on this TV, you MUST specify the appropriate value in the Zone
field as described below. See also Reference section, "Using the TV Zoning Feature," for further
information.
Note: The Zoning feature is only applicable for TVs that will be configured using a ".tlx" file (local
or remote configuration).
Z
EZ-Manager Wizard
1
2
3
4
Zone, Label, and Room Number
• If creating Zones for Installer Menu settings and/or Channel Mapping, select the appropriate Zone # (0-8)
based on the Zone in which this TV is installed. (See Commercial Mode Setup Guide for more information.)
• Select a Label and/or use the alphanumeric keypad on the remote to input the Room Number.
• When done, select 'Next' to continue.
Zone
Label
-----
0
Exit
USB Configuration
1. Complete the appropriate field(s) as described below. Use the Left/Right arrow keys on the
Installer Remote to navigate between each of the fields.
• Zone: Enables you to set a TV Zone # so that the TV can be configured with Installer Menu
and/or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu and/
or TV Setup Menu settings may be provided in a Clone/Configuration (.tlx) file. If the TV is
being configured for FTG Mode via CPU, the TV Zone # setting also allows the TV to omit
channels that have been restricted in the FTG Channel Map.
To change the TV Zone from its default value (0), navigate to the Zone field at the left of the
screen, and use the Up/Down arrow keys to specify the desired TV Zone # (1–8).
• Label: Allows you to select a North, South, East, or West text label for this TV. In the Label
field, use the Up/Down arrow keys to select the applicable label.
• Room Number: Allows you to specify the number of the room—up to 16 characters—in which
the TV is located. In the Room Number field, you can use the number keys on the Installer
Remote to direct enter a room number. Use the Dash key on the Installer Remote as necessary
to toggle between number and letter characters in the Room Number field. Also, you can use
the Flashback key on the Installer Remote to delete characters in this field.
2. When you are ready to continue, select the appropriate option, as follows:
• To proceed to the next EZ-Manager screen, use the arrow keys to select Next, and then
press OK on the Installer Remote. Continue to the "Configure Pro:Centric Settings" section
on the following page.
• To use a USB memory device in conjunction with the TV Manager / USB Download Menu to
complete the configuration, continue to "USB Configuration" on page 18.
14
Q.MENU
1
2
3
Room Number
INPUT
TV
DVD
MARK
1
2
3
4
5
6
.,;
@
abc
def
4
5
6
ghi
jkl
mno
7
8
9
pqrs
tuv
wxyz
7
8
9
0
FLASHBK
CHAR/NUM
CC
CHAR/
P
0
VOL
TIMER
CH
A
DEL
E
G
DELETE
NUM
MUTE
PORTAL
INFO
GUIDE
OK
ENTER
Zone & Room Number
Next
MENU
EXIT
SETTINGS
PIP
PIPCH+
PIPCH-
SWAP
PIP INPUT
SAP
206-4278
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
