Description Of Menus; Top Level - ABB PST30 Installation And Commissioning Manual
Softstarters
Hide thumbs
Also See for PST30:
- Installation and maintenance manual (95 pages) ,
- Manual (10 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
U= 0%
Menu
Change Password
Select
Back
Keypad is
Active
Lock
Back
2003-01-30
11:08
Back
In= 0000 Out= 0000
Back
Stop Mode
Figure 1: Top level display loop
U=
0%
I=0.0A
Menu
Figure 2: Top level (start position)
Uin
Back
Figure 3: U
status
in
Motor Temp.
Back
Figure 4: Motor temperature
SCR Temp.
Back
Figure 5: SCR temperature
1SFC132003M0201
7:2 Description of menus
I=0.0A
Uin
OK
Back
7:2.1 Top level
Motor Temp.
0%
Back
SCR Temp.
60%
Back
Start Mode
Volt
Back
Torque
Back
OK
0%
60%
For detailed description of each function, see Chapter 10
"Functions" .
This level contains information about output voltage and
current, heat sink temperature, real time clock and more.
From this menu, the keypad can be locked/unlocked and a
password for this can be set. It is also possible to enter the
other menus.
Display at start up
When switching on the supply voltage the LCD will first
display the text "Hello", and after a few seconds switch into
displaying Top Level, figure 2.
The displayed current is the actual motor current.
U
status
in
The softstarter checks and displays the status of the input
voltage (line side).
Motor temperature
The used thermal capacity of the motor is displayed. 0%
means that the motor is in cold state. 50% means that half
the capacity is used etc.
SCR temperature
The temperature of the SCRs in the softstarter is displayed
as a percentage of the max. value.
Chapter 7
Settings and configuration
85
- Quick Links:
- Faults
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
