Related Manuals for Siemens WM08E166IL
Summary of Contents for Siemens WM08E166IL
- Page 1 Washing machine WM08E166IL ... siemens-home.com/welcome Register your product online ens-home.com/welcome...
-
Page 2: Your New Washing Machine
Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries. -
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use After-sales service ..27 Intended use I n t e n d e d u s e Consumption rates ..28 For private domestic use only. -
Page 5: Safety Instructions
Safety instructions Reaching into the drum while Safety instructions ■ it is still rotating may cause hand injuries. S a f e t o n s u c t i i n s t r Electrical safety Do not reach into the drum while it is rotating. -
Page 6: Environmental Protection
Environmental protection Cut through the mains cable Do not let children touch the ■ and remove it, along with the hot washing machine door. plug. Destroy the lock on the ■ washing machine door. Environmental Warning Risk of suffocation! protection Children may become wrapped o n m e n t a l E n v i r... -
Page 7: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t b r i e Connect the mains Turn on the water Sort the laundry. Open the washing plug. tap (for models machine door. without Aqua-Stop). -
Page 8: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance i n g G e t t k n o w t h e a n c e a p p l i Washing machine ( Detergent drawer ~ Page 17 8 Washing machine door with door handle 0 Controls/display elements 9S Open the washing machine door... -
Page 9: Control Panel
Getting to know the appliance Control panel ( Programme selector for selecting a @ Gspeed*, ¦ eco*, Ø Anti-Crease, programme and for switching the machine on and l Rinse Plus/ zAqua Plus* additional programme settings (* depending on the model) Overview of all additional programme settings 0 Status indicators ~ Page 15... -
Page 10: Laundry
Laundry – W : Suitable for washing by Laundry hand; e.g. h / Woollens programme L a u n d r y – Ž : Do not wash the laundry in Sorting laundry the machine. Sort your laundry according to the care instructions and manufacturer's information on the care labels, depending on:... -
Page 11: Prepare The Laundry
Detergent Prepare the laundry Detergent Caution! g e n t D e t e r Damage to the appliance/fabrics Correct selection of detergent Foreign objects (e.g. coins, paperclips, The care label is crucial for selecting needles, nails) may damage the laundry the correct detergent, temperature and or components in the washing machine. -
Page 12: Saving Energy And Detergent
Detergent Saving energy and detergent For light and normal soiling, you can save energy (lower washing temperature) and detergent. Saving Soiling/note Reduced temper- Light ature and deter- No visible dirt or stains. Cloth- gent quantity as ing has taken on some body per the recom- odour, e.g.: mended dosage... -
Page 13: Overview Of Programmes
Overview of programmes Overview of programmes O v e r v i p r o g r a m m e s Programmes on the programme selector Programme/type of washing/instructions Settings Name of the programme Max. load; Brief explanation of the programme and for which fabrics it is suita- * Reduced load for the GSpeed ble. -
Page 14: Starching
Overview of programmes Programme/type of washing/instructions Settings p Empty Max. 7 kg Drain the rinsing water after a programme using the 2 setting (with- out final spin) for gentle treatment of delicate laundry Max. 2 kg h / Í Wool Hand- or machine-washable fabrics that are made of wool or contain Ž... -
Page 15: Soaking
Programme default settings Soaking Additional programme settings Pour soaking agent/detergent into compartment II in accordance with i o n a l A d d i t p r o g r a m m e i n g s s e t t the manufacturer’s instructions. -
Page 16: Operating The Appliance
Operating the appliance The settings are activated without Operating the needing to be confirmed. appliance They are not saved when the appliance is switched off. i n g O p e r a t t h e a n c e a p p l i Programme default settings Preparing the washing... -
Page 17: Measure And Add Detergent And Care Products
Operating the appliance Observe the maximum specified Filling ■ load. Overfilling adversely affects the Warning washing result and promotes Eye/skin irritation! creasing. Detergent and care products may spray Unfold presorted laundry items and out if the detergent drawer is opened place them in the drum. -
Page 18: Start The Programme
Operating the appliance Pull out the detergent drawer. Press To continue the programme, press the down the insert and fully remove the Start/Pause button. The programme drawer. continues automatically. Slide the measuring aid forwards, fold it down and click it into place. Changing the programme Reinsert the drawer. -
Page 19: Programme End
Sensors Programme end Sensors The Ready indicator light lights up and S e n s o r s the indicator light for the Start/Pause Automatic load sensing button flashes. If the Wash indicator light also flashes, The automatic load sensing function the washing machine has detected too adapts the water consumption ideally to much foam during the wash programme... -
Page 20: Setting The Signal
Setting the signal Setting the signal i n g S e t t t h e s i g n a l 1. Activate setting mode for the audible signal volume Set to $ One step Select and hold + one step Release 2. -
Page 21: Cleaning And Maintenance
Cleaning and maintenance Descaling Cleaning and maintenance Make sure that there is no Note: laundry in the machine. C l e a n i a n d e n a n c e m a i n t Descaling should not be necessary if Warning the detergent is measured out correctly. -
Page 22: Detergent Solution Pump Blocked
Cleaning and maintenance Detergent solution pump Repeat the above steps until all the detergent solution has completely blocked drained out. Warning Risk of scalding! When you wash at high temperatures, the detergent solution gets very hot. If you come into contact with the hot detergent solution, you may be scalded. -
Page 23: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance The drain hose at the siphon is blocked Switch off the appliance. Pull out the mains plug. Loosen the hose clamp. Carefully remove the drain hose, residual water may leak out. For standard and Aqua-Secure Clean the drain hose and siphon models, clean the filter on the rear of connecting piece. -
Page 24: Faults And What To Do About Them
Faults and what to do about them. Caution! Faults and what to do Water damage about them. Any escaping water may cause water damage. F a u l t a n d w h a t a b o u t t h e m . -
Page 25: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display* Cause/remedy Display* Cause/remedy Close the washing machine door Motor fault. Call the after-sales properly; washing may be service. trapped. Drain pump blocked: Clean the There is water in the base drain pump ~ Page 22 trough*, the appliance is leaking. - Page 26 Faults and what to do about them. Faults Cause/remedy The spin result is not sat- Not a fault – unbalanced load detection system has stopped the spin cycle; ■ isfactory. washing unevenly distributed. Distribute small and large items of washing in the drum. Laundry is wet/too damp.
-
Page 27: After-Sales Service
After-sales service After-sales service r - s a l A f t e s e r v i If you cannot rectify a fault yourself (Faults and what to do about them~ Page 25 ), please contact our after-sales service. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. -
Page 28: Consumption Rates
Consumption rates Consumption rates C o n s u m p t i r a t e s Energy and water consumption, programme duration and residual moisture for the main washing programmes Programme Load Energy consumption* Water* Programme duration* Cottons 30 °C 7 kg 0.31 kWh 72 litres... -
Page 29: Technical Data
Technical data Technical data Positioning and connecting T e c h n i c d a t a Dimensions: i o n i n g P o s i t a n d c o n n e c t i 850 x 600 x 590 mm Included with the appliance (height x width x depth) -
Page 30: Safety Instructions
Positioning and connecting Notes Caution! Check the machine for transport Water damage ■ damage. Never use a damaged The connection points for the water machine. If you have a complaint, supply hose and water drain hose are please contact the retailer from under high water pressure. -
Page 31: Installing The Appliance In A Kitchenette
Positioning and connecting Installing the appliance in a kitchenette Warning Install the appliance (underneath the worktop or fitted in a cabinet) before connecting it to the power supply. Take the hoses out of the holders. Notes Recess width of 60 cm required. ■... -
Page 32: Hose And Cable Lengths
Positioning and connecting Hose and cable lengths Water inlet Left-hand connection Warning ■ Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). -
Page 33: Water Outlet
Positioning and connecting Model: Standard Height difference between the ■ ■ installation surface and the drain: Min. 60 cm, max. 100 cm You can lay the water drain hose as follows: Drainage into a washbasin ■ Warning Risk of scalding! Model: Aqua-Secure ■... -
Page 34: Levelling
Positioning and connecting Only pull out the mains cable by the ■ plug and never by the cable, as this could damage it. Never unplug the mains plug during ■ operation. Observe the following information and ensure that: Levelling Notes The mains voltage and voltage ■... -
Page 35: Before Washing For The First Time
Positioning and connecting Before washing for the first Transportation time E.g. when moving house The washing machine was thoroughly Preparatory work: tested before leaving the factory. To Turn off the water tap. remove any water that may be left over Reduce the water pressure in the from the test, run the first wash cycle supply hose. - Page 36 A call set-up fee of up 6 pence may apply.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Siemens-Electrogeräte GmbH Carl-Wery-Straße 34, 81739 München siemens-home.com *9001009537*...