Network Setting
Important
• To configure network settings, you must be logged in with administrative rights such as Administrator ac-
count. We recommend that your network administrator configure the network settings.
1.
Specify the Ethernet frame type for communication between the printer and computers.
For instructions, see "Specifying the Printer's Frame Type."
2.
Specify the NetWare print services, including the print server and queue.
For instructions, see "Specifying NetWare Print Services."
3.
Specify NetWare protocol details besides the frame type.
For instructions, see "Specifying NetWare Protocols."
After you have completed the steps above, configure each computer for printing over the NetWare network.
4.
Connect to the NetWare network.
Install NetWare client software on each computer to be used for printing over the network, and log in to the Net-
Ware server or tree. For instructions on connection, refer to the NetWare and operating system documentation.
5.
Install the printer driver.
Follow the instructions of your network administrator to install the printer driver on each computer to be used for
printing. When installing the printer driver, choose Network Printer as the printer destination, and then choose the
print queue created from the NetWare print service settings.
6.
Follow these steps to configure the printer port. This step is not necessary if you specified the printer destination
during installation of the printer driver.
1.
Open the Printers and Faxes (or Printers ) window.
2.
Right-click the printer icon and choose Properties.
10
3.
Click the Port (or Advanced ) tab to display the Port (or Advanced ) sheet.
4.
As the destination port, specify the print queue created by configuring the NetWare print service settings.
954
Configuring NetWare Network Settings
>
Network Setting (Windows)
>
→P.946
→P.950
→P.952
iPF6350