Canon ipf6350 User Manual page 964
Hide thumbs
Also See for ipf6350:
- User manual (1110 pages) ,
- Basic manual (52 pages) ,
- Setup manual (12 pages)
Table of Contents
Advertisement
Network Setting
NDS PSer-
ver
NPrinter
7.
Click OK to display the Network page.
Specifying the Printer's Frame Type
To enable communication between the printer and computers on your network, specify the Ethernet frame type in your Net-
Ware environment.
Follow these steps to specify the frame type by using imagePROGRAF Device Setup Utility or the printer Control Panel.
Note
10
• You can specify the frame type by using RemoteUI if the printer's IP address is configured.
Important
• Before specifying the frame type, make sure the printer is on and connected to the network.
• For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF De-
vice Setup Utility."
Specifying the frame type using imagePROGRAF Device Setup Utility
1.
Start imagePROGRAF Device Setup Utility.
946
2.
In the list of printers, select the printer to configure.
Specifying the Printer's Frame Type
>
Network Setting (Windows)
Item
Tree Name
Specify the name of an NDS tree that has a NetWare print server.
(0–32 characters)
Context Name
Specify the name of a context that has a NetWare print server.
(0–255 characters)
Print Server
Specify the name of a NetWare print server.
Name
(0–64 characters)
Print Server
Set a password for the print server.
Password
(0–20 characters)
Polling Interval
Specify the interval to confirm jobs.
(1–255 seconds)
Print Server
Specify the name of a NetWare print server.
Name
(0–47 characters)
Printer Number
Specify the number of the printer connected to the NetWare print
server.
(0–254)
→P.435
>
Details
Default
Setting
—
—
—
—
5
—
0
iPF6350
Advertisement
Chapters
Table of Contents
Troubleshooting
