Configuring The Ip Address Using The Printer Control Panel - Canon ipf6350 User Manual

Hide thumbs Also See for ipf6350:

Table of Contents

Network Setting

Press the OK button.

The Set./Adj. Menu is displayed.

Press ▲ or ▼ to select Interface Setup, and then press the OK button.

Press ▲ or ▼ to select TCP/IP, and then press the OK button.

Press ▲ or ▼ to select IPv4, and then press the OK button.

Press ▲ or ▼ to select IPv4 Settings, and then press the OK button.

Press ▲ or ▼ to select IP Address, and then press the OK button.

After you press ◀ or ▶ to select the input field, numerical input is possible.

Press the ▲ or ▼ button to enter the value.

Repeat steps 8 and 9 to complete the settings, and then press the OK button.

Press the Menu button.

If you have changed the settings, a confirmation message is displayed. Press ▲ or ▼ to select Yes, and then press

the OK button.

• Be sure to complete step 11. This will activate the values you have entered.

• You can also specify the subnet mask and default gateway on the Control Panel.

• The DNS can also be configured from the printer Control Panel.

• If an error message is displayed, check the settings and correct any invalid values.

Configuring the IP Address Using the Printer Control Panel

Network Setting

• Pressing the ▲ button increases the number by 1. The maximum value is 9, after which 0 is dis-

• Pressing the ▼ button decreases the number by 1. The minimum value is 0, after which 9 is dis-

• Hold down ▲ or ▼ to increase or decrease the value continuously.

• Make sure the IP address you enter for the printer is not the same as any computer IP address in your

Table of Contents