Table of Contents
Advertisement
Precautions
On operation
• The MB-X6 must be used within a temperature range of
0ºC to 40ºC (32ºF to 104ºF). Avoid using the unit for
extended periods at extremely high temperatures or
placing it in direct sunlight, especially outdoors, because
this may damage the finish of the case.
Never install the unit on or near a heat source, such as
lighting equipment or power amplifiers.
• Avoid using in very humid or dusty places, because such
use may shorten the life of the product.
• To avoid degradation of the signal-to-noise ratio, do not
use the unit in noisy places or in locations subject to
vibration, such as the following:
− near electrical equipment, such as motors,
transformers or dimmers
− near air conditioning equipment or places subject to
direct air flow from an air conditioner
− near public address loudspeakers
− where adjacent equipment might knock against the
unit
• Switching lights on or off may produce electrical
interference over the entire frequency range. Position the
unit, the wireless microphones, and the transmitters so
that interference is minimized.
• The tuner is precisely adjusted at the factory and no
adjustment before use is necessary. Do not touch the
inside of the tuner or try to repair it by yourself.
On cleaning
Clean the unit with a dry, soft cloth. Never use thinner,
benzene, alcohol or any other chemicals, since these may
damage the finish.
8
Precautions / Overview
Overview
Features
The MB-X6 is a tuner base unit and is capable of
accomodating up to six URX-M1 Diversity Tuner
Modules included in the UWP-X1/X2 Wireless
Microphone Package (not supplied) or WRU-806A/806B
UHF Synthesized Tuner Units (not supplied).
Suitability for channel plan for
simultaneous multichannel operation
The MB-X6 accomodates tuner units which are suitable
for channel plan for simultaneous multichannel operation,
without the effects of intermodulation.
Rack mounting
The MB-X6 can be mounted in an EIA standard 19-inch
rack (1U size).
Note
The UWP series Wireless Microphone Packages are not
compatible with WRT series transmitters, WRR series
tuners, or WRU series tuner units.
Using the CD-ROM manual (for
European model only)
The supplied CD-ROM includes versions of the Operating
Instructions for the MB-X6 in English, French, German,
Italian, and Spanish in PDF format.
Preparations
The following program must be installed on your computer
in order to read the operating instruction contained on the
CD-ROM.
• Adobe Reader Version 6.0 or higher
Memo
If Adobe Reader is not installed, you can download it from
the following URL:
http://www.adobe.com/
Adobe and Adobe Reader are trademarks of Adobe Systems Incorporated in
the United States and/or other countries.
Advertisement
Table of Contents
