Related Manuals for Yamaha XENTER HW151
Summary of Contents for Yamaha XENTER HW151
- Page 1 Read this manual carefully before operating this vehicle. OWNER’S MANUAL HW151 52S-F8199-E1...
- Page 2 EAU46091 Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
- Page 3 EAU10114 Welcome to the Yamaha world of motorcycling! As the owner of the HW151, you are benefiting from Yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
- Page 4 Important manual information EAU10134 Particularly important information is distinguished in this manual by the following notations: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
- Page 5 Important manual information EAUT1391 HW151 OWNER’S MANUAL ©2015 by Yamaha Motor Taiwan Co., Ltd. 1st edition, October 2015 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Taiwan Co., Ltd. is expressly prohibited. Printed in Taiwan.
-
Page 6: Table Of Contents
Table of contents Safety information ......1-1 Starting off........5-2 Checking the front brake lever free Further safe-riding points....1-5 Acceleration and deceleration..5-2 play..........6-20 Braking ..........5-3 Adjusting the rear brake lever free Description ........2-1 Tips for reducing fuel play.......... - Page 7 Table of contents Scooter care and storage....7-1 Matte color caution ......7-1 Care..........7-1 Storage ..........7-4 Specifications ........8-1 Consumer information ..... 9-1 Identification numbers ..... 9-1...
-
Page 8: Safety Information
Safety information EAU1026B should receive training from a cer- approaching passing tified instructor. Contact an autho- through intersections, since in- Be a Responsible Owner rized scooter dealer to find out tersections are the most likely As the vehicle’s owner, you are respon- about the training courses nearest places for scooter accidents to sible for the safe and proper operation... - Page 9 Safety information there is no traffic until you have feet on the passenger footrests. injury or an accident. become thoroughly familiar with Never carry a passenger unless Always wear protective clothing the scooter and all of its con- he or she can firmly place both that covers your legs, ankles, and trols.
- Page 10 Yamaha accessories, which are avail- to the center of the vehicle as pos- able only from a Yamaha dealer, have sible and make sure to distribute Loading been designed, tested, and approved...
- Page 11 Yamaha accessories, recog- namic changes. If accessories lights or engine power. nize that some aftermarket accessories are added to the handlebar or...
-
Page 12: Further Safe-Riding Points
Safety information to solid parts of the scooter, such EAU57600 and ankle so they do not flap), and Further safe-riding points as the frame or upper front fork tri- a brightly colored jacket. Be sure to signal clearly when ... -
Page 13: Description
Description EAU10411 Left view 1, 2 1. Headlight (page 6-28) 9. Carrier (page 3-14) 2. Auxiliary light (page 6-29) 10.Rear turn signal light (page 6-31) 3. Front turn signal light (page 6-30) 4. Front brake fluid reservoir (page 6-22) 5. Passenger footrest (page 3-11) 6. -
Page 14: Right View
Description EAU10421 Right view 3, 4 8 9, 10 1. Tail/brake light (page 6-30) 9. Battery (page 6-26) 2. Muffler (page 3-10) 10.Fuse box (page 6-28) 3. Fuel tank cap (page 3-8) 4. Coolant reservoir (page 6-14) 5. Shock absorber assembly (page 3-13) 6. -
Page 15: Controls And Instruments
Description EAU10431 Controls and instruments 1. Rear brake lever (page 3-8) 9. Throttle grip (page 6-17) 2. Left handlebar switches (page 3-7) 3. Main switch/steering lock (page 3-1) 4. Multi-function display (page 3-3) 5. Front storage compartment (page 3-12) 6. Luggage holder (page 3-14) 7. -
Page 16: Instrument And Control Functions
Instrument and control functions EAU10462 the engine stalls. To lock the steering Main switch/steering lock EAU10662 All electrical systems are off. The key can be removed. EWA10062 WARNING Never turn the key to “OFF” or “LOCK” while the vehicle is moving. LOCK Otherwise the electrical systems will 1. -
Page 17: Indicator Lights And Warning Lights
1. Turn signal indicator lights “ ” and “ ” 1. Insert the key. a Yamaha dealer check the electrical 2. Coolant temperature warning light “ ” 2. With the key in the “LOCK” posi- circuit. -
Page 18: Multi-Function Display
Changing gine is not working correctly. If this oc- settings while riding can distract the curs, have a Yamaha dealer check the operator and increase the risk of an self-diagnosis system. accident. The electrical circuit of the warning light 1. - Page 19 If the odometer indicates “-----”, segments of the display come on counting the distance traveled from that have a Yamaha dealer check the for a few seconds. During this point. In that case, pushing the "RE- multi-function display, as it may be time, the multi-function display is SET"...
- Page 20 If the V-belt change indicator displays button for at least 3 seconds. After re- check the multi-function display, “-----”, have a Yamaha dealer check the setting, “OIL CHANGE” will disappear. as it may be faulty. multi-function display, as it may be Push the “SELECT”...
- Page 21 Instrument and control functions then release it to start the clock. mode. 4. Push the “RESET” button to select If the ambient temperature falls be- Fuel meter the desired brightness level in the low –10 C, a lower temperature following order: BL-01 ...
-
Page 22: Handlebar Switches
Instrument and control functions EAU1234H EAU12401 EAUS2012 Handlebar switches Dimmer switch “ ” Front brake lever Set this switch to “ ” for the high Left beam and to “ ” for the low beam. EAU12461 Turn signal switch “ ”... -
Page 23: Rear Brake Lever
Instrument and control functions EAUS1963 the rear brake lever is being EAUT3591 Rear brake lever Fuel tank cap pulled. The unified brake system does not function when the front brake is applied alone. 1. Rear brake lever 1. Fuel tank cap 2. -
Page 24: Fuel
Instrument and control functions properly closed after filling fuel. EAU13222 Fuel Leaking fuel is a fire hazard. Make sure there is sufficient gasoline in the tank. EWA10882 WARNING Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, follow these instructions. -
Page 25: Catalytic Converter
Your Yamaha engine has been de- Do not allow the engine to idle signed to use regular unleaded gaso- more than a few minutes. -
Page 26: Seat
Instrument and control functions EAU13933 2. Remove the key from the main EAUT3711 Seat Passenger footrest switch if the scooter will be left un- attended. To open the seat 1. Place the scooter on the center- Make sure that the seat is properly se- stand. -
Page 27: Storage Compartments
Instrument and control functions EAUT4870 Front storage compartment hicle. Storage compartments ECA17841 Rear storage compartment NOTICE Keep the following points in mind when using the storage compart- ments. Since the storage compart- ments accumulate heat when exposed to the sun and/or the engine heat, do not store any- thing susceptible to heat, con- 1. -
Page 28: Shock Absorber Assembly
Do not dispose of a damaged or worn-out shock absorber as- sembly yourself. Take the shock absorber assembly to a Yamaha dealer for any service. 1. Shock absorber assembly EWA10222 WARNING This shock absorber assembly con- tains highly pressurized nitrogen gas. -
Page 29: Carrier
Instrument and control functions EAU15113 EAUT3482 Carrier Luggage holder EWA10172 WARNING Do not exceed the load limit of 5 kg (11 lb) for the carrier. Do not exceed the maximum load of 179 kg (395 lb) for the ve- hicle. -
Page 30: For Your Safety - Pre-Operation Checks
• If necessary, add recommended coolant to specified level. 6-14 • Check cooling system for leakage. • Check operation. • If soft or spongy, have Yamaha dealer bleed hydraulic system. • Check lever free play. • Adjust if necessary. Front brake •... - Page 31 • Make sure that operation is smooth. • Check throttle grip free play. Throttle grip 6-17, 6-24 • If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing. • Make sure that operation is smooth. Control cables 6-23 •...
-
Page 32: Operation And Important Riding Points
NOTICE: If a warning light does not go off, have a Yamaha dealer check its electrical circuit. [ECAT1171] 2. Close the throttle completely. 3. Start the engine by pushing the start switch while applying the front or rear brake. -
Page 33: Starting Off
Operation and important riding points than 10 seconds on any one at- EAU16762 EAU16782 Starting off Acceleration and deceleration tempt. Before starting off, allow the engine to warm up. 1. While pulling the rear brake lever with your left hand and holding the grab bar with your right hand, push the scooter off the centerstand. -
Page 34: Braking
Operation and important riding points EAU16794 EAU16821 EAU16831 Braking Tips for reducing fuel Engine break-in consumption EWA10301 There is never a more important period WARNING in the life of your engine than the period Fuel consumption depends largely on between 0 and 1000 km (600 mi). -
Page 35: Parking
ECA10271 NOTICE Do not park near grass or other flammable materials which If any engine trouble should occur might catch fire. during the engine break-in period, immediately have a Yamaha dealer check the vehicle. -
Page 36: Periodic Maintenance And Adjustment
If replaced more frequently, otherwise you are not familiar with vehicle ser- rapid engine wear may result. Con- vice, have a Yamaha dealer perform sult a Yamaha dealer for proper service. maintenance intervals. -
Page 37: Owner's Tool Kit
If you do not have the tools or experi- ence required for a particular job, have a Yamaha dealer perform it for you. - Page 38 From 30000 km (17500 mi), repeat the maintenance intervals starting from 6000 km (3500 mi). Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
-
Page 39: Periodic Maintenance Chart For The Emission Control System
Periodic maintenance and adjustment EAU46921 Periodic maintenance chart for the emission control system ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) •... -
Page 40: General Maintenance And Lubrication Chart
Periodic maintenance and adjustment EAU1771A General maintenance and lubrication chart ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) Air filter element •... - Page 41 Periodic maintenance and adjustment ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) Front brake lever • Lubricate with lithium-soap-based ...
- Page 42 Periodic maintenance and adjustment ODOMETER READING ANNUAL ITEM CHECK OR MAINTENANCE JOB 1000 km 6000 km 12000 km 18000 km 24000 km CHECK (600 mi) (3500 mi) (7000 mi) (10500 mi) (14000 mi) • Check operation. • Check throttle grip free play, and ...
-
Page 43: Removing And Installing The Cowling And Panels
Periodic maintenance and adjustment EAU18724 EAUT3561 Removing and installing the Cowling A cowling and panels To remove the cowling The cowling and panels shown need to 1. Remove the cowling screws and be removed to perform some of the bolts. maintenance jobs described in this chapter. - Page 44 Periodic maintenance and adjustment EAUT4881 Panel C Tightening torque: luggage holder screws: Panel A To remove the panel 7 Nm (0.7 m·kgf, 5.1 ft·lbf) 1. Open the seat. (See page 3-11.) To remove the panel 2. Remove the screw, and then pull Panel B the panel off as shown.
-
Page 45: Checking The Spark Plug
If the spark plug shows a distinctly dif- ferent color, the engine could be oper- ating improperly. Do not attempt to diagnose such problems yourself. In- stead, have a Yamaha dealer check the vehicle. 2. Check the spark plug for electrode erosion and excessive carbon or... -
Page 46: Engine Oil And Oil Strainer
Periodic maintenance and adjustment necessary. past finger tight. However, the spark EAUT3703 Engine oil and oil strainer plug should be tightened to the speci- Specified spark plug: The engine oil level should be checked fied torque as soon as possible. NGK / CPR9EA-9 before each ride. - Page 47 Periodic maintenance and adjustment 3. Remove the engine oil filler cap and the engine oil drain bolts A and B to drain the oil from the crankcase. NOTICE: When re- moving the engine oil drain bolt B, the O-ring, compression spring, and oil strainer will fall out.
-
Page 48: Final Transmission Oil
If any leakage is found, have a ters the crankcase. seated. Yamaha dealer check and repair the 9. Start the engine, and then let it idle scooter. In addition, the final transmis- 7. Install engine oil drain bolt A, and... -
Page 49: Coolant
Periodic maintenance and adjustment then tighten the bolt to the speci- EAU20071 Coolant fied torque. The coolant level should be checked Tightening torque: before each ride. In addition, the cool- Final transmission oil drain bolt: ant must be changed at the intervals 20 Nm (2.0 m·kgf, 14.5 ft·lbf) specified in the periodic maintenance and lubrication chart. - Page 50 If water has been added to the coolant, have a Yamaha dealer check the antifreeze con- tent of the coolant as soon as possible, otherwise the effec- 1.
-
Page 51: Air Filter And V-Belt Case Air Filter Elements
Periodic maintenance and adjustment EAUT3551 Cleaning the air filter check hose Air filter and V-belt case air 1. Check the hose on the rear side of filter elements the air filter case for accumulated The air filter and V-belt case air filter el- dirt or water. -
Page 52: Checking The Engine Idling Speed
5. Install the V-belt air filter case cov- er by installing the bolts. Throttle grip free play: 6. Install the panel. 3.0–5.0 mm (0.12–0.20 in) Periodically check the throttle grip free play and, if necessary, have a Yamaha dealer adjust it. 6-17... -
Page 53: Valve Clearance
Tire air pressure (measured on cold from occurring, the valve clearance small area of road contact. Therefore, it tires): must be adjusted by a Yamaha dealer is essential to maintain the tires in good Up to 90 kg (198 lb) load: Front:... - Page 54 100 / 80 - 16M/C 50P surface must first be “broken glass fragments in it, or if the sidewall is Manufacturer/model: in” for it to develop its optimal cracked, have a Yamaha dealer re- DURO / DM1157F characteristics. place the tire immediately. Rear tire:...
-
Page 55: Cast Wheels
1. Rear brake lever free play play. If the free play exceeds 10 mm has been changed or replaced. An (0.39 in), have a Yamaha dealer adjust Rear brake lever free play: unbalanced wheel can result in 10.0–15.0 mm (0.39–0.59 in) -
Page 56: Checking The Front Brake Pads And Rear Brake Shoes
To check the brake pad wear, check the wear limit line, have a Yamaha the wear indicator groove. If a brake dealer replace the brake shoes as a... -
Page 57: Checking The Brake Fluid Level
Periodic maintenance and adjustment set. EAU32346 performance. Checking the brake fluid level Clean the filler cap before re- Before riding, check that the brake fluid moving. Use only DOT 4 brake is above the minimum level mark. fluid from a sealed container. Check the brake fluid level with the top ... -
Page 58: Changing The Brake Fluid
Changing the brake fluid Checking and lubricating the brake system for leakage. If the brake cables Have a Yamaha dealer change the fluid level goes down suddenly, have a brake fluid at the intervals specified in Yamaha dealer check the cause before... -
Page 59: Checking And Lubricating The Throttle Grip And Cable
Front and rear brake levers be checked before each ride. In addi- tion, the cable should be lubricated by a Yamaha dealer at the intervals speci- fied in the periodic maintenance chart. The throttle cable is equipped with a rubber cover. Make sure that the cover is securely installed. -
Page 60: Checking The Front Fork
1. Place the vehicle on a level sur- fork does not operate smoothly, face and hold it in an upright posi- have a Yamaha dealer check or re- tion. WARNING! To avoid injury, pair it. securely support the vehicle so there is no danger of it falling over. -
Page 61: Checking The Steering
If any free ways shield your eyes when play can be felt, have a Yamaha working near batteries. In case dealer check or repair the steering. of contact, administer the fol- lowing FIRST AID. - Page 62 To charge the battery once a month and fully charge it if away from the battery and pro- Have a Yamaha dealer charge the bat- necessary. vide sufficient ventilation when tery as soon as possible if it seems to 3.
-
Page 63: Replacing The Fuses
4. If the fuse immediately blows Do not affix any type of tinted amperage. WARNING! Do not again, have a Yamaha dealer film or stickers to the headlight use a fuse of a higher amperage check the electrical system. -
Page 64: Replacing An Auxiliary Light Bulb
6. Install the cowling together with 1. Remove cowling (See the headlight unit. page 6-8.) 7. Have a Yamaha dealer adjust the 2. Remove the socket (together with headlight beam if necessary. the bulb) by turning it counter- clockwise. 1. Headlight bulb cover 3. -
Page 65: Tail/Brake Light
This model is equipped with an LED-type tail/brake light. If a front turn signal light burns out, re- If the tail/brake light does not come on, place it as follows. have a Yamaha dealer check it. 1. Remove cowling (See page 6-8.) 2. -
Page 66: Replacing A Rear Turn Signal Light Bulb
Periodic maintenance and adjustment EAUT3671 4. Install the lens by installing the Replacing a rear turn signal screw. NOTICE: Do not over- light bulb tighten the screw, otherwise the 1. Remove the turn signal lens by re- lens may break. [ECA11192] moving the screw. -
Page 67: License Plate Light
However, should your scooter re- quire any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the scooter prop- erly. -
Page 68: Troubleshooting Charts
Remove the spark plug and check the electrodes. The engine does not start. Have a Yamaha dealer check the vehicle. Check the compression. 4. Compression The engine does not start. There is compression. - Page 69 Start the engine. If the engine overheats again, have a The coolant level Yamaha dealer check and repair the cooling system. is OK. If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.
-
Page 70: Scooter Care And Storage
Rust and corrosion can develop even if matte colored finished parts. Be ECA10784 NOTICE high-quality components are used. A sure to consult a Yamaha dealer for rusty exhaust pipe may go unnoticed advice on what products to use be- Avoid using strong acidic wheel on a car, however, it detracts from the fore cleaning the vehicle. - Page 71 For additional clean- switches and lights), breather Since sea salt or salt sprayed on the ing, use Yamaha Windshield Cleaner hoses and vents. roads during winter are extremely cor- or another high-quality windshield ...
- Page 72 7. Let the scooter dry completely be- fore storing or covering it. EWA10943 Consult a Yamaha dealer for ad- WARNING vice on what products to use. Contaminants on the brakes or tires Washing, rainy weather or humid can cause loss of control.
-
Page 73: Storage
Scooter care and storage EAU36564 2. Fill up the fuel tank and add fuel 4. Lubricate all control cables and the Storage stabilizer (if available) to prevent pivoting points of all levers and the fuel tank from rusting and the pedals as well as of the sidestand/ Short-term fuel from deteriorating. -
Page 74: Specifications
Specifications Dimensions: EAU72940 Lubrication system: Fuel injection: Wet sump Overall length: Throttle body: Engine oil: 1990 mm (78.3 in) ID mark: Overall width: Recommended brand: 52S1 01 690 mm (27.2 in) YAMALUBE Spark plug(s): Overall height: Type: Manufacturer/model: 1135 mm (44.7 in) SAE 10W-40 NGK / CPR9EA-9 Seat height:... - Page 75 Specifications Manufacturer/model: Rear wheel: Ignition system: DURO / DM1157F Wheel type: Rear tire: Charging system: Cast wheel AC magneto Type: Rim size: Battery: Tubeless J 16M/C × MT2.75 Size: Front brake: Model: 120 / 80 - 16M/C 60P GT7B-4 Type: Manufacturer/model: Voltage, capacity: Hydraulic single disc brake...
- Page 76 Specifications Engine trouble warning light: Fuse: Main fuse: 20.0 A Headlight fuse: 15.0 A Signaling system fuse: 15.0 A Ignition fuse: 7.5 A Backup fuse: 7.5 A...
-
Page 77: Consumer Information
These identification numbers are needed when registering the vehicle with the authorities in your area and when ordering spare parts from a Yamaha dealer. VEHICLE IDENTIFICATION NUM- 1. Vehicle identification number 1. Engine serial number BER: 2. - Page 78 1. Model label The model label is affixed to the bottom of the seat. (See page 3-11.) Record the information on this label in the space provided. This information will be needed when ordering spare parts from a Yamaha dealer.
- Page 79 Index Front brake lever free play, checking ..6-20 Shock absorber assembly .......3-13 Front fork, checking......... 6-25 Spark plug, checking .......6-10 Acceleration and deceleration ....5-2 Fuel ............3-9 Specifications..........8-1 Air filter and V-belt case air filter Fuel consumption, tips for reducing ..5-3 Starting off ..........5-2 elements..........6-16 Fuel tank cap..........
- Page 84 Original instructions PRINTED IN TAIWAN 2015.10-0.8 × 1 NKT...