Changing Gear Oil - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (234 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
TIP:
If the propeller nut does not align with the pro-
peller shaft hole after tightening to the speci-
fied torque, tighten the nut further to align it
with the hole.
EMU2928B
Changing gear oil
EWM00800
WARNING
Be sure the outboard motor is securely
●
fastened to the transom or a stable
stand. You could be severely injured if
the outboard motor falls on you.
Never get under the lower unit while it is
●
tilted, even when the tilt support lever or
knob is locked. Severe injury could oc-
cur if the outboard motor accidentally
falls.
1.
Tilt the outboard motor so that the gear oil
drain screw is at the lowest point possi-
ble.
2.
Place a suitable container under the gear
case.
3.
Remove the gear oil drain screw and gas-
ket. NOTICE: If there is an excessive
quantity of metal particles on the mag-
netic gear oil drain screw, this can in-
dicate lower unit problem. Consult
your Yamaha dealer.
ZMU02063
[ECM01900]
1. Gear oil drain screw
2. Oil level plug
TIP:
If a magnetic gear oil drain screw is
●
equipped, remove all metal particles from
the screw before installing it.
Always use new gaskets. Do not reuse the
●
removed gaskets.
4.
Remove the oil level plug and gasket to
allow the oil to drain completely.
NOTICE: Check the used gear oil after
it has been drained. If the gear oil is
milky or contains water or a large
amount of metal particles, the gear
case may be damaged. Have a
Yamaha dealer check and repair the
outboard motor.
TIP:
For disposal of used oil, consult your Yamaha
dealer.
5.
Put the outboard motor in a vertical posi-
tion. Using a flexible or pressurized filling
device, inject the gear oil into the gear oil
drain screw hole.
Recommended gear oil:
Yamalube Marine Gearcase Lube or
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
0.670 L (0.708 US qt, 0.590 Imp.qt)
Maintenance
2
1
ZMU03273
[ECM00713]
81
- Quick Links:
- Engine Oil Requirements
Hide quick links:
Advertisement
Table of Contents
