Procedure For Tilting Down (Power Trim And Tilt Models) - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (234 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Operation
could shake loose from the tilt support
and fall. If the motor cannot be trail-
ered in the normal running position,
use an additional support device to
secure it in the tilt position. For more
detailed information, see page 67.
[ECM01641]
4.
Models equipped with trim rods: Once the
outboard motor is supported with the tilt
support lever, press the power trim and
tilt switch "
" (down) to retract the trim
rods. NOTICE: Make sure that the trim
rods retracts completely during moor-
ing. This protects the rods from ma-
rine growth and corrosion, which
could damage the power trim and tilt
mechanism.
[ECM00252]
EMU33121
Procedure for tilting down (power trim
and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2.
Release the tilt support lever.
64
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
DN
"
UP
DN
ZMU01936
"
- Quick Links:
- Engine Oil Requirements
Hide quick links:
Advertisement
Table of Contents
