Installation Requirements; Boat Horsepower Rating; Mounting Motor; Remote Control Requirements - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (234 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
Specifications and requirements
Fuel tank capacity:
25 L (6.61 US gal, 5.50 Imp.gal)
Recommended engine oil:
YAMALUBE 4M FC-W or 4-stroke
outboard motor oil
Recommended engine oil grade 1:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter
replacement):
3.5 L (3.70 US qt, 3.08 Imp.qt)
Engine oil quantity (with oil filter
replacement):
3.7 L (3.91 US qt, 3.26 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
Yamalube Marine Gearcase Lube or
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
0.670 L (0.708 US qt, 0.590 Imp.qt)
Tightening torque:
Spark plug:
25 Nm (2.55 kgf-m, 18.4 ft-lb)
Propeller nut:
35 Nm (3.57 kgf-m, 25.8 ft-lb)
Engine oil drain bolt:
28 Nm (2.86 kgf-m, 20.7 ft-lb)
Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
EMU33554
Installation requirements
EMU33564
Boat horsepower rating
EWM01560
WARNING
Overpowering a boat can cause severe in-
stability.
14
Before installing the outboard motor(s), con-
firm that the total horsepower of your out-
board motor(s) does not exceed the boats
maximum horsepower rating. See the boat's
capacity plate or contact the manufacturer.
EMU33571
Mounting motor
EWM01570
WARNING
Improper mounting of the outboard mo-
●
tor could result in hazardous conditions
such as poor handling, loss of control,
or fire hazards.
Because the motor is very heavy, spe-
●
cial equipment and training is required
to mount it safely.
Your dealer or other person experienced in
proper rigging should mount the motor using
correct equipment and complete rigging in-
structions. For further information, see page
44.
EMU33581
Remote control requirements
EWM01580
WARNING
If the engine starts in gear, the boat can
●
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.
If the engine ever starts in gear, the
●
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.
The remote control unit must be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.
- Quick Links:
- Engine Oil Requirements
Hide quick links:
Advertisement
Table of Contents
