Cooling System Maintenance; Cleaning The Air Intake Screen - Toro 30074 Operator's Manual

Commercial walk-behind mower floating deck, t-bar, gear drive with 36in or 48in turbo force cutting unit

Hide thumbs Also See for 30074:

Table of Contents

4. Check each slot again and make slight adjustments until

the feeler gauge between the rotor and armature with

very slight contact between them.

Figure 45

1. Adjusting nut

2. Slot

3. Feeler gauge

Cooling System

Maintenance

Service Interval: Before each use or daily

Remove any build-up of grass, dirt or other debris from the

cylinder and cylinder head cooling fins, air intake screen on

flywheel end, and carburetor-governor levers and linkage.

This will help insure adequate cooling and correct engine

speed and will reduce the possibility of overheating and

mechanical damage to the engine.

Table of Contents

30078 39074 39078