Removing The Machine From Storage - Toro Super Bagger 20897 Operator's Manual

53cm lawn mower

Hide thumbs Also See for Super Bagger 20897:

Table of Contents

G020809

Forward Position

1. With the handle in the upright position, step on the

foot pedal and hold it down.

2. Move the handle all the way forward and loosen the

upper handle knob (Figure 50).

3. To unfold the handle, refer to

1 Unfolding the Handle (page 5).

Figure 49

Figure 50

Removing the Machine from

Storage

1. Check and tighten all fasteners.

2. Remove the spark plug and spin the engine rapidly

using the starter to blow excess oil from the cylinder.

3. Install the spark plug and tighten it with a torque

wrench to 20 N-m (15 ft-lb).

4. Perform any needed maintenance procedures; refer to

Preparing for Maintenance (page 15).

5. Check the engine oil level; refer to

Checking the Engine Oil Level (page 9).

6. Fill the fuel tank with fresh gasoline; refer to

Filling the Fuel Tank (page 9).

7. Connect the wire to the spark plug.

Table of Contents