Printing The Nozzle Check Pattern - Canon Pixma G1000 series Online Manual
Hide thumbs
Also See for Pixma G1000 series:
- Online manual (296 pages) ,
- Service manual (80 pages) ,
- Instruction manual (73 pages)
Table of Contents
Advertisement
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
that are low.
You need to prepare: a single sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a single sheet of A4 or Letter-sized plain paper in the rear tray.
3. Pull out the paper output tray, then open the output tray extension.
4. Hold down the RESUME/CANCEL button until the POWER lamp flashes twice, then
release it immediately.
The nozzle check pattern will be printed.
Do not perform any other operations until the printer completes the printing of the nozzle check pattern.
5.
Examine the nozzle check
pattern.
48
Refill any ink tanks
Hide quick links:
Advertisement
Table of Contents
