Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for NEC NWTL656
Summary of Contents for NEC NWTL656
- Page 1 NWTL656 User manual...
-
Page 2: Washer Safety
WASHER SAFETY Save these instructions To reduce the risk of fire, electrical shock, or injury when using your washer, adhere to the following basic precautions. Read all instructions before using your washer Flammable fluids (dry cleaning solvents, If the supply cord is damaged, it must be kerosene, gasoline etc.) should not be replaced by the manufacturer or qualified used or stored on or near your washer. -
Page 3: Table Of Contents
• You are advised to read the Manual carefully so as to use the washer in a correct manner. • After reading, please keep the Manual properly for future reference. • All invoices and warranty certificates must be kept properly after purchase, as they serve as an important basis for provision of services by the NEC. -
Page 4: Components / Parts And Accessories
COMPONENTS AND PARTS Water Inlet Hose Lid Handle Water Inlet Detergent Window Dispenser Lint Filter Washing Tub Power Supply Plug Bleach Inlet Wave Plate Softener Inlet Control Panel Handle Base Board Drain Pipe Plastic Base Adjustor Lever ACCESSORIES Coupling Water intake pipe Drain pipe Base board (optional) -
Page 5: Points For Attention
The user must never employ power supply cables/plugs which have been damaged or sockets which have come loose. All power supply cable replacements should be referred to your NEC Service Centre. Before washing items, please empty loose objects e.g. coins, from items. 240v... -
Page 6: Installation
INSTALLATION CONNECTION OF DRAIN HOSE • Direct drain hose at the washer drain outlet until it is completely encased by the outlet. • Check if the connection is secured. Less than DOWNWARD DRAIN WASHER (FOR NON PUMP MODELS) 1.5m • The height should not exceed 8cm. •... -
Page 7: Inlet Hose Connection
INLET HOSE CONNECTION Be careful not to confuse the hot water inlet and the cold-water inlet. In using only one water tap or in case of one water inlet valve attached, connect the inlet hose to the cold-water inlet valve. For Ordinary Tap 1. -
Page 8: Operating Your Washer
OPERATING YOUR WASHER To obtain the best washing results, you must operate your washer properly. This section gives you this important information. Preparing clothes for washing • Close zippers, snaps, and hooks to avoid • Turn down cuffs and turn synthetic knits out snagging other items. -
Page 9: Control Panel
THE FUNCTIONS OF THE CONTROL PANEL Used to adjust the amount of water according to the size of the load to be washed. Used to select the full automatic course: Wool Speedy Gentle Standard Heavy • Used to choose water temperature being supplied. •... -
Page 10: Preparation Of Laundry And Use Of Detergents
PREPARATION OF LAUNDRY AND USE OF DETERGENTS BEFORE LOADING LAUNDRY INTO THE MACHINE, YOU HAVE TO PAY ATTENTION TO THE FOLLOWING: • Check whether the items are machine washable. • Set apart fabrics which is non-colourfast. • Empty the pocket or of all foreign matters, otherwise the drum will be damaged in the process of washing. -
Page 11: Hints And Tips
HINTS AND TIPS Small articles and fabrics which are easily damaged must be put in a wash bag. Items which do not absorb water readily must be submerged in water by hand. Garments of long staple fibers subject to pilling must be rolled over before being loaded into the machine. -
Page 12: Cleaning And Maintenance
CLEANING AND MAINTENANCE MAINTENANCE OF DETERGENT DISPENSER DRAWER When the detergent dispenser drawer is stained with detergent, clean it with a soft cloth. • If the sticking is very serious, flush it with water while cleaning it with a cloth. Then set the spin program only for about one-minute spin operation to drain away the residual water. -
Page 13: Cleaning And Maintenance
CLEANING AND MAINTENANCE CLEANING OF WATER INLET If water inlet is choked up by dirt, it will affect water flow. 1. Turn off the water tap and remove the water inlet hose. 2. Clear the dirt collected in the mesh over water inlet. -
Page 14: How To Clean The Filter
HOW TO CLEAN THE FILTER Cleaning the Lint Filter 1. Pull the Filter frame 2. Turn the lint filter inside 3. Return the filter as it was upward. out, and wash the lint off with and insert the filter frame water. -
Page 15: Removing Stains / Specifications
REMOVING STAINS Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein type stains like blood, milk, or grass. Prewashing helps loosen soil before washing. Stain removal rules • Use warm water for soaking or prewashing stained laundry. Hot water can set stains. •... -
Page 16: Handling Of Common Breakdowns
2. Is base board properly inserted and secured? Note: To avert any danger, damaged power supply cables must be replaced by the manufacturer, its servicing department or authorised personnel specially assigned to the job. SPECIFICATIONS Model Number NWTL656 Power Source 230V Power Consumption 440W Dimensions (mm) - Page 17 Western Australia Perth 45 Sarich Court, Osborne Park 6017 131-632 For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC Service Centre NEC Australia Pty. Ltd. Display and Home Group 244 Beecroft Road EPPING 2121...