hit counter script
D-Link DIR-320NRU User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DIR-320NRU
  6. User manual
D-Link DIR-320NRU User Manual

D-Link DIR-320NRU User Manual

Multifunction wireless router supporting wimax, 3g gsm/cdma with built-in switch
Hide thumbs Also See for DIR-320NRU:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
User Manual
DIR-320NRU

Multifunction Wireless Router

Supporting WiMAX, 3G GSM/CDMA
with Built-in Switch
Firmware Version: 1.2.94. April 2011

Advertisement

Table of Contents
loading

Related Manuals for D-Link DIR-320NRU

Summary of Contents for D-Link DIR-320NRU

  • Page 1: Multifunction Wireless Router

    User Manual DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Firmware Version: 1.2.94. April 2011...

  • Page 2: Table Of Contents

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch User Manual Contents Chapter 1. Introduction..........4 Contents and Audience............4 Conventions..............4 Document Structure............4 Chapter 2. Overview..........5 General Information............5 Specifications..............6 Product Appearance............9 Front Panel and Right Side Panel..........9 Back Panel...............10 Delivery Package............11 Chapter 3.
  • Page 3 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch User Manual WPS..............59 Using WPS Function via Web-based Interface......61 Using WPS Function without Web-based Interface......61 WDS..............62 Advanced Settings............64 WMM..............66 Client..............68 Advanced..............70 VLAN..............70 UPnP..............73 DDNS..............74 DNS..............76 Routing..............77 Remote Access............79 IGMP..............81 Firewall..............82...

  • Page 4: Chapter 1. Introduction

    Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DIR-320NRU and configure a PC in order to access its web-based interface. Chapter 4 describes all pages of the web-based interface in detail.

  • Page 5: Chapter 2. Overview

    Using the DIR-320NRU device, you are able to quickly create a wireless network at home or in your office, which lets your relatives or employees connect to your wireless network virtually anywhere (within the operational range of your wireless network).

  • Page 6: Specifications

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Overview User Manual Specifications WAN Interface: 1 10/100BASE-TX Ethernet port for cable or DSL modem or private Ethernet line. • LAN Interface: 4 10/100BASE-TX Ethernet ports. • WLAN Interface: IEEE 802.11b/g/n.
  • Page 7 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Overview User Manual USB Modem: Auto connection to available type of supported network (3G/2G) • Enabling/disabling PIN code check, changing PIN code • Wireless Connection: WLAN splitting (up to 4 SSIDs) •...
  • Page 8 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Overview User Manual Configuration and Management: Multilingual web-based interface for configuration and management • Firmware update via web-based interface • Saving/restoring configuration to/from file • Support of remote logging •...

  • Page 9: Product Appearance

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Overview User Manual Product Appearance Front Panel and Right Side Panel Figure 1. Front panel view. Mode Description The router is powered on Solid green Power The router is powered off...

  • Page 10: Back Panel

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Overview User Manual Back Panel Figure 2. Back panel view. Port Description LAN 1-4 4 Ethernet ports to connect computers or network devices. A port to connect to a cable or DSL modem or to a private Ethernet...

  • Page 11: Delivery Package

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Overview User Manual Delivery Package The following should be included: wireless router DIR-320NRU • power adapter 5V/2A • Ethernet cable (CAT 5E) • CD-ROM with “User Manual” and “Quick Installation Guide”...

  • Page 12: Chapter 3. Installation And Connection

    Operating System Configuration of the multifunction wireless router DIR-320NRU supporting WiMAX, 3G GSM and CDMA with a built-in switch (hereinafter referred to as “the router”) is performed via the built-in web-based interface. The web-based interface is available from any operating system that supports a web browser.
  • Page 13 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual USB Modem To connect to a WiMAX, 3G GSM or CDMA network, you should use a USB modem. Connect it to the USB port of the router, then access the web-based interface of the router, and you will be able...

  • Page 14: Connecting To Pc (In Os Windows Xp)

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual Connecting to PC (in OS Windows XP) PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
  • Page 15 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual 3. In the Local Area Connection Properties window, on the General tab, in the This connection uses the following items section, select the Internet Protocol (TCP/IP) line.
  • Page 16 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual 4. Select the Obtain an IP address automatically radio button. Click the OK button. Figure 5. The Internet Protocol (TCP/IP) Properties window. Click the ОК button. Now your computer is configured to obtain an IP address automatically.

  • Page 17: Pc With Wi-Fi Adapter

    3. Search for available wireless networks. 4. In the opened Wireless Network Connection window, select the needed wireless network (DIR-320NRU) and click the Connect button. After that the Wireless Network Connection Status window appears. 5 It is recommended to a USB extension cable to connect a USB modem to the router.

  • Page 18: Connecting To Web-Based Interface

    2. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.0.1). Press the Enter key. Figure 7. Connecting to the web-based interface of the DIR-320NRU device. 3. On the opened page, enter the username (login) and password for the administrator account (by default, the following username and password are specified: admin, admin).
  • Page 19 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual Figure 9. The page for changing the default administrator password. Enter the new password in the Password and Confirmation fields. Then click the Save button.

  • Page 20: Saving And Restoring Settings

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual The web-based interface of the router is multilingual. Select a needed language from the menu displayed when the mouse pointer is over the Language caption. You can change the language of the web-based interface in any menu item.
  • Page 21 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Installation and Connection User Manual Also you can restore the factory default settings via the hardware Reset button. The hole of the button is located on the back panel of the router next to the power connector. Use a small paperclip to activate the button;...

  • Page 22: Chapter 4. Configuring Via Web-Based Interface

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual CHAPTER 4. CONFIGURING WEB-BASED INTERFACE Status This menu displays data on the current state of the router. The following are represented: statistics for every active interface, data on devices connected to the router's network and its web-based interface, and the routing table.

  • Page 23: Routing Table

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Routing Table The Status / Routing table page displays the information on routes. The table contains destination IP addresses, gateways, subnet masks, and other data.

  • Page 24: Lan Clients

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual LAN Clients On the Status / LAN clients page, you can view data on network devices connected to the router. The page displays devices connected to the wireless network of the router, devices connected to the built-in switch of the router, and devices accessing the web-based interface of the router.

  • Page 25: Net

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).

  • Page 26: Editing Local Interface Parameters

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Editing Local Interface Parameters To edit the parameters of the router's local area network, left-click the LAN connection on the Net / Connections page.
  • Page 27 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description General settings Name A name for this connection. Connection Type The type of network protocol used by this connection – IPoE.
  • Page 28 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description An operating mode of the router's DHCP server. Enable: the router assigns IP addresses to clients automatically in accordance with specified parameters. When this value is selected, the Start IP, End IP, and the Lease time fields are displayed on the tab.

  • Page 29: Mac Address

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual On the Static DHCP tab, you can specify MAC address and IP address pairs. The tab is active when the router's DHCP server is enabled.

  • Page 30: Creating Wimax Wan Connection

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Creating WiMAX WAN Connection You can create a connection of this type only when a WiMAX USB modem is connected to the router. Select the WAN connection on the Net / Connections page. On the opened page, select the USB-WIMAX value from the Physical interface drop-down list and specify the needed values.
  • Page 31 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description IP settings Select the checkbox to configure automatic IP address assignment Obtain an IP address for this connection. When the checkbox is selected, the IP...

  • Page 32: Creating 3G Wan Connection

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Creating 3G WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to creating a 3G WAN connection, proceed to the USB modem menu and enter the PIN code on the page displayed (see the USB Modem section, page 89).
  • Page 33 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 23. The page for creating a new connection. The PPP settings and Miscellaneous sections. Parameter Description PPP settings PPP Username A username (login) to connect to the network of the operator.
  • Page 34 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description A number dialed to connect to the authorization server of the Dial number operator. The maximum size of units transmitted by the interface. Optional.

  • Page 35: Creating Pppoe Wan Connection

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection To create a connection of this type, select the WAN connection on the Net / Connections page. On the opened page, select the PPPoE value from the Connection type drop-down list and specify the needed values.
  • Page 36 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description General settings Name A name for connection for easier identification. Enable Select the checkbox to enable the connection. Direction The direction of this connection.
  • Page 37 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 25. The page for creating a new connection. The PPP settings and Miscellaneous sections. Parameter Description PPP settings PPP Username A username (login) to access the Internet.
  • Page 38 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description Authentication Select a required authentication method from the drop-down list or algorithm leave the AUTO value. Service name The name of the PPPoE authentication server.

  • Page 39: Creating Ipoe Wan Connection

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Creating IPoE WAN Connection To create a connection of this type, select the WAN connection on the Net / Connections page. On the opened page, select the IPoE value from the Connection type drop-down list and specify the needed values.

  • Page 40: General Settings

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description General settings Name A name for connection for easier identification. Enable Select the checkbox to enable the connection. Direction The direction of this connection.
  • Page 41 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description IP settings Select the checkbox to configure automatic IP address assignment Obtain an IP address for this connection. When the checkbox is selected, the IP...

  • Page 42: Creating Pptp Or L2Tp Wan Connection

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Creating PPTP or L2TP WAN Connection To create a connection of the PPTP or L2TP type, click the Add button on the Net / Connections page.
  • Page 43 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 29. The page for creating a new connection. The PPTP/L2TP settings and Miscellaneous sections. Page 43 of 108...
  • Page 44 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description PPTP/L2TP settings Select the checkbox to enable auto-start of the connection upon the Connect automatically boot-up of the router. A way of specifying the Select a way of specifying the address of the PPTP or L2TP server.
  • Page 45 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description Interface The name assigned to the connection by the system. Miscellaneous Select the checkbox to allow multicast traffic from the external Enable IGMP Multicast network (e.g.

  • Page 46: Wi-Fi

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Common settings On the Wi-Fi / Common settings page, you can enable your wireless local area network (WLAN) and split it into parts.

  • Page 47: Basic Settings

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual For every part of the WLAN you can specify a name (SSID), security settings, rules for MAC filtering, and enable the WMM function (if needed). To specify these values, select the needed part from the BSSID drop-down list and click the Change button.
  • Page 48 (It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.) A name for the WLAN. By default, the value DIR-320NRU is specified. If your network is spitted into parts, each part has the default name (DIR-320NRU.2, DIR-320NRU.3, and DIR-...

  • Page 49: Security Settings

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Security Settings On the Wi-Fi / Security settings page, you can modify security settings of the WLAN. Figure 32. The default security settings.
  • Page 50 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 33. Network authentication types supported by the router. The router supports the following authentication types: Authentication type Description Open Open authentication (with or without WEP encryption).
  • Page 51 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual When the Open, Shared, or WEPAUTO values are selected, the WEP Encryption settings section is displayed: Figure 34. The Open value is selected from the Network Authentication drop-down list.
  • Page 52 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual When the Open-IEEE8021X value is selected, the WEP Encryption settings and RADIUS settings sections are displayed: Figure 35. The Open-IEEE8021X value is selected from the Network Authentication drop-down list.
  • Page 53 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description The checkbox activating WEP encryption. When the checkbox is selected, the Default Key ID field, the Encryption Key WEP as Enable Encryption WEP HEX checkbox, and four Encryption Key WEP fields are displayed on the page.
  • Page 54 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed values are selected, the WPA Encryption settings section is displayed: Figure 36. The WPA2-PSK value is selected from the Network Authentication drop-down list.
  • Page 55 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed values are selected, the RADIUS settings and WPA Encryption settings sections are available: Figure 37. The WPA2 value is selected from the Network Authentication drop-down list.

  • Page 56: Mac Filter

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC-Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 57 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 39. The tab for adding a MAC address. To remove a MAC address from the list of MAC addresses, select the checkbox located to the right of the relevant MAC address in the MAC-address list section and click the Delete button.

  • Page 58: Station List

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Station List On the Wi-Fi / Station List page, you can view the list of wireless devices connected to the router. Figure 40. The list of the router's wireless clients.

  • Page 59: Wps

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and select a method used to easily add wireless devices to the WLAN.

  • Page 60: Network Authentication

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual To activate the WPS function, select the WPS Enable checkbox and click the Change button. When the checkbox is selected, the Information and Connection sections are available on the page.

  • Page 61: Using Wps Function Via Web-Based Interface

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To add a wireless device via the PIN method of the WPS function, follow the next steps: 1.

  • Page 62: Wds

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual 1. Select the PBC method in the software of the wireless device that you want to connect to the router's WLAN. 2. Click the relevant button in the software or on the cover of the wireless device that you want to connect to the WLAN.
  • Page 63 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The WDS function mode. Disable: The function is disabled. Bridge mode: Access points communicate to each other only, WDS Mode wireless devices cannot connect to them.

  • Page 64: Advanced Settings

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Advanced Settings On the Wi-Fi / Advanced settings page, you can define additional parameters for the router's WLAN. Changing parameters presented on this page may negatively affect your WLAN! Figure 43.
  • Page 65 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The time interval (in seconds) between keep alive checks of Station Keep Alive wireless devices from your WLAN.

  • Page 66: Wmm

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. The WMM function implements the QoS features for Wi-Fi networks. It helps to improve the quality of data transfer over Wi-Fi networks by prioritizing different types of traffic.
  • Page 67 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual For every Access Category the following fields are available: Parameter Description Aifsn Arbitrary Inter-Frame Space Number. This parameter influences time delays for the relevant Access Category. The lower the value, the higher is the Access Category priority.

  • Page 68: Client

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point. As a rule, the client mode is used to connect to a WISP network. All parameters specified on this page should be provided by your WISP.
  • Page 69 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual When the Open or Shared authentication type is selected, the following fields are available: Parameter Description The checkbox activating WEP encryption. When the checkbox is...

  • Page 70: Advanced

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: define static routes and rules for remote access to the web-based interface, add name servers, enable the UPnP function, configure a DDNS service, allow the router to use IGMP, and create groups of ports for virtual networks.
  • Page 71 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 47. The page for adding a group of ports for VLAN. You can specify the following parameters: Parameter Description Main settings Name A name for the port for easier identification.
  • Page 72 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual The type of the VLAN which identifier is specified in the VLAN ID field. Local. The group of this type is a channel used to connect local clients to the router.

  • Page 73: Upnp

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual UPnP On the Advanced / UPnP page, you can enable the UPnP function. UPnP is a set of networking protocols designed for automatic configuration of network devices. The UPnP function performs automatic configuration of the device's parameters for network applications requiring an incoming connection to the router.

  • Page 74: Ddns

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.

  • Page 75: User Password

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 50. The page for adding a DDNS service. You can specify the following parameters: Parameter Description DDNS Service Select a DDNS provider from the drop-down list.

  • Page 76: Dns

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 51. The Advanced / DNS page. DNS servers are used to determine the IP address from the name of a server in Intranets or the Internet (as a rule, they are specified by an ISP or assigned by a network administrator).

  • Page 77: Routing

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can add static routes (routes for networks that are not connected directly to the device but are available through the interfaces of the device) into the system.
  • Page 78 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 53. The page for adding a static route. You can specify the following parameters: Parameter Description Destination network A destination network to which this route is assigned.

  • Page 79: Remote Access

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Remote Access On the Advanced / Remote access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
  • Page 80 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 55. The page for adding a rule for remote management. You can specify the following parameters: Parameter Description IP address A host or a subnet to which the rule is applied.

  • Page 81: Igmp

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual IGMP On the Advanced / IGMP page, you can enable IGMP for the router. IGMP is used for managing multicast traffic (transferring data to a group of destinations). This protocol allows using network resources for some applications, e.g., for streaming video, more...

  • Page 82: Firewall

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: add rules for IP filtering, define a DMZ- zone, create virtual servers, and configure MAC filters.
  • Page 83 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 58. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description IP-filter rule editing Name A name for the rule for easier identification.

  • Page 84: Virtual Servers

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description A port of the destination IP address. You can specify one port, several Destination ports separated by a comma, or a range of ports separated by a colon.
  • Page 85 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 60. The page for adding a virtual server. You can specify the following parameters: Parameter Description Select a virtual server template from the drop-down list, or select Template Custom to specify all parameters of the new virtual server manually.

  • Page 86: Dmz

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual To edit the parameters of an existing server, follow the link with the name of the server. On the opened page, change the needed parameters and click the Change button.

  • Page 87: Mac Filter

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC-filter page, you can configure MAC-address-based filtering for computers of the router's LAN. Figure 62. The Firewall / MAC-filter page.
  • Page 88 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual On the opened page, enter the MAC address of the device from the router's LAN in the MAC- address field and select the Deny value from the Action drop-down list. Then click the Change button.

  • Page 89: Usb Modem

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual USB Modem This menu is designed to operate USB modems. If the PIN code check for the SIM card inserted into your USB modem is not disabled, then upon the first access to the pages of the USB modem menu (under the current web-interface session) the page for checking the PIN code is displayed.
  • Page 90 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual When a USB modem is connected to the router, the following data are displayed on the page: Parameter Description Vendor The manufacturer of your USB modem.

  • Page 91: Pin

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual On the USB modem / PIN page, you can change the PIN code of the identification card inserted to your USB modem, disable or enable the check of the PIN code.
  • Page 92 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 67. The USB modem / PIN page. The PUK code check. If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the Attempts left field), the identification card inserted into your USB modem is blocked.

  • Page 93: Wimax

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual WiMAX This menu is designed to operate WiMAX USB modems. Information On the WiMAX / Information page, you can connect to the network of your WiMAX ISP to establish a high-speed wireless connection to the Internet.

  • Page 94: Transmit Power

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Parameter Description Base station ID The identifier of the base station. Transmit power The signal level at the output of the modem's receiver.

  • Page 95: Control

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Control This menu is designed to create restrictions on access to certain web sites. URL Filter On the Control / URL-filter page, you can specify URL addresses which will be unavailable for users of the LAN.
  • Page 96 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Figure 70. A page for adding a forbidden URL. On the opened page, enter a URL address which should be forbidden for your LAN users in the URL-address field, select the Deny value from the Action drop-down list, then click the Save button.

  • Page 97: System

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual System In this menu you can save the current settings to the non-volatile memory, create a backup of the router's configuration, restore the router's configuration from a previously saved file, restore the factory default settings, view the system log, configure automatic synchronization of the system time, and update the firmware of the router.

  • Page 98: Configuration

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can save the changed settings to the non-volatile memory, restore the factory defaults, backup the current configuration, or restore the router's configuration from a previously created file.

  • Page 99: System Log

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Actions of the Save, Factory, and Backup buttons also can be performed via the top-page menu displayed when the mouse pointer is over the System caption.
  • Page 100 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Control Description From the drop-down list, select the IP value to specify an IP address Server address type of a host from the local or global network, or the URL value to specify a URL address of a remote server.

  • Page 101: Firmware Upgrade

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual Firmware Upgrade On the System / Firmware upgrade page, you can upgrade the firmware of the router. Upgrade the firmware only when the router is connected to your PC via a wired connection.

  • Page 102: Ntp Client

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Configuring via Web-based Interface User Manual 7. Wait until the router is rebooted. Log into the web-based interface, using the default IP address, login and password (192.168.0.1, admin, admin).

  • Page 103: Chapter 5. Operation Guidelines

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Supported USB Modems GSM modems: Huawei E150 • Huawei E1550 • Huawei E160G • Huawei E169G • Huawei E173 • Huawei E220 •...

  • Page 104: Wireless Installation Considerations

    RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DIR-320NRU device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).

  • Page 105: Connecting To Cable Or Dsl Modem

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Operation Guidelines User Manual Connecting to Cable or DSL Modem If you need to connect the router to a cable or DSL modem, do the following. 1. Place the router in an open location in the supposed center of your wireless network. Do not plug the power adapter into the router.

  • Page 106: Chapter 6. Abbreviations And Acronyms

    DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Address Resolution Protocol BSSID Basic Service Set Identifier Complementary Code Keying CDMA...
  • Page 107 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Abbreviations and Acronyms User Manual Link Control Protocol Media Access Control Maximum Transmission Unit Network Address Translation Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Push Button Configuration Personal Identification Number...
  • Page 108 DIR-320NRU Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch Abbreviations and Acronyms User Manual Wired Equivalent Privacy Wi-Fi Wireless Fidelity WiMAX Worldwide Interoperability for Microwave Access WISP Wireless Internet Service Provider WLAN Wireless Local Area Network Wi-Fi Multimedia...

Table of Contents