English English Targeted Models and Features This manual applies to the following models of the TM-H6000IV. If your printer is equipped with a MICR reader (factory installed option), the printer can read MICR characters. ❏ Standard model: Can print on the face of roll/slip paper.
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. Never attempt to repair this product yourself. Improper repair work can be dangerous.
To prevent a paper jam, do not prevent paper from being ejected from the paper exit, and do not pull the paper being ejected. Downloading Drivers, Utilities, and Manuals Further product information is written in the TM-H6000IV Technical Reference Guide. Drivers, utilities, and manuals can be downloaded from one of the following URLs.
Installing the ribbon cartridge (See “Installing and Replacing the Ribbon Cartridge” on page 10.) Installing the roll paper (See “Installing and Replacing the Roll Paper” on page 10.) Operation check with test print (See “Test Printing” on page 11.) 8 TM-H6000IV User’s Manual...
To remove the connector cover, push both sides of the cover inward to remove the holes in both sides of the cover from the projections at the bottom of the printer (indicated as b in illustration E). TM-H6000IV User’s Manual 9...
Follow the steps below to install/replace the ribbon cartridge for the endorsement printer. Note: Use the EPSON ERC-43 ribbon cartridge for the endorsement printer. Turn on the printer. Pull the lever on the left side of the receipt unit to open the receipt unit. (See illustration I.)
After the Slip LED flashes, insert the slip paper. If your printer is equipped with the endorsement printer, the printer prints both sides of the paper. Both types of test printing are completed when "*** completed***” is printed. TM-H6000IV User’s Manual 11...
Never clean the product with alcohol, benzine, thinner, or other such solvents. Doing so may damage or break the parts made of plastic and rubber. Cleaning the Thermal Head Epson recommends cleaning the thermal head periodically (generally every 3 months) to maintain receipt print quality. CAUTION: The thermal head can be very hot after printing.
Open the front cover using the tabs on both sides of the front cover. (See illustration F.) Open the front carriage unit using the lever at the right of the front carriage unit. (See illustration P.) Remove the jammed paper. TM-H6000IV User’s Manual 13...
Approx. 4.4 kg {9.7 lb} Mbps: megabits per second *1: Factory installed options *2: Be sure to use a safety-standards-applied power source that meets the following specifications. Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or less 14 TM-H6000IV User’s Manual...