Checking The Ink Volume; Packing And Shipping The Machine - Brother DCP-J140W Advanced User's Manual
Hide thumbs
Also See for DCP-J140W:
- Guía del usuario de software manual (169 pages) ,
- Software user's manual (166 pages) ,
- Guia basica del usario (79 pages)
Table of Contents
Advertisement
Checking the ink volume
You can check the ink that is left in the
cartridge.
a
Press Menu.
b
Press a or b to choose 1.Ink.
Press OK.
c
Press a or b to choose 3.Ink Volume.
Press OK.
The LCD shows the ink volume.
BK:-ooooonn+
d
Press a or b to choose the colour you
want to check.
e
Press Stop/Exit.
Note
You can check the ink volume from your
computer.
uuSoftware User's Guide: Printing
®
(Windows
)
uuSoftware User's Guide: Printing
(Macintosh)
12
A
e
Packing and shipping
the machine
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly package your machine. Damage
caused to your machine during transit may
not be covered by your warranty. The
machine should be adequately insured with
the carrier.
Important
It is important to allow the machine to
"park" the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this process
may lead to print problems and possible
damage to the print head.
a
Open the ink cartridge cover.
b
Remove all four ink cartridges. Press
the ink release lever above each
cartridge to release it.
(uuBasic User's Guide: Replacing the
ink cartridges)
A
Advertisement
Table of Contents
