B Options; Optional Paper Tray (Lt-5400); Memory Board; So-Dimm Types - Brother DCP-8250DN Advanced User's Manual
Hide thumbs
Also See for DCP-8250DN:
- Basic user's manual (155 pages) ,
- Quick setup manual (17 pages) ,
- Service manual (373 pages)
Table of Contents
Advertisement
B
Options
Optional paper tray
(LT-5400)
An optional lower tray can be installed, and it
can hold up to 500 sheets of 80 g/m
When an optional tray is installed, the
machine can hold up to 1050 sheets of plain
paper.
For setup, see the Instructions that we have
supplied with the lower tray unit.
WARNING
If you use a Lower Tray, DO NOT carry the
machine with the Lower Tray as you may
be injured or cause damage to the machine
because it is not attached to the Lower
Tray.
34
Memory board
DCP-8250DN has 128 MB of standard
B
memory. The machine has one slot for
optional memory expansion. You can
2
paper.
increase the memory up to a maximum of
384 MB by installing one SO-DIMM (Small
Outline Dual In-line Memory Module).
SO-DIMM Types
You can install the following SO-DIMMs:
256 MB Kingston KTH-LJ2015/256
256 MB Transcend TS256MHP423A
Note
• For more information, visit the Kingston
Technology website at
http://www.kingston.com/.
• For more information, visit the Transcend
website at http://www.transcend.com.tw/.
In general, the SO-DIMM must have the
following specifications:
Type
CAS latency
Clock
frequency
Capacity
Height
DRAM type
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, call the dealer you
bought the machine from or Brother
Customer Service.
144-pin and 16-bit output
4
267 MHz (533 Mb/S/Pin) or
more
256 MB
30.0 mm
DDR2 SDRAM
B
B
B
Hide quick links:
Advertisement
Table of Contents
