Table of Contents
Advertisement
Home >
Scan
>
Scan Using the Scan Button on Your Brother Machine
Scan Photos and Graphics
Send scanned photos or graphics directly to your computer.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
1. Load your document.
2. Press [Scan] > [to Image].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then
press [OK].
4. Do one of the following:
•
To change the settings, press [Options], and then go to the next step.
•
Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
5. Press the [Scan Settings] option, and then press [Set at Device].
To use the [Scan Settings] option, a computer with the ControlCenter software installed must be
connected to the machine.
6. Select the scan settings you want to change, and then press [OK].
Option
Scan Type
Resolution
File Type
Scan Size
Remove Background Color Change the amount of background color that is removed.
7. Press [Start].
The machine starts scanning. If using the machine's scanner glass, follow the LCD instructions to complete
the scanning job.
Description
Select the scan type for your document.
Select the scan resolution for your document.
Select the file format for your document.
Select the scan size for your document.
> Scan Photos and Graphics
102
Advertisement
Table of Contents
