Page 2: Table Of Contents
Home > Table of Contents Table of Contents Before You Use Your Brother Machine ....................1 Applicable Models ............................2 Definitions of Notes ............................3 Trademarks ..............................4 Important Note ............................... 5 Introduction to Your Brother Machine....................6 Before Using Your Machine ........................... 7 Front View and Back View ..........................
Page 3 Network Management Software and Utilities ....................91 Learn about Network Management Software and Utilities ..............92 Additional Methods of Configuring Your Brother Machine for a Wireless Network ........93 Before Configuring Your Brother Machine for a Wireless Network............. 94 Configure Your Machine for a Wireless Network................95 Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected ™...
Page 4 Use the Network Connection Repair Tool (Windows ) ..............271 Where Can I Find My Brother Machine's Network Settings? ............273 I Cannot Complete the Wireless Network Setup Configuration............274 My Brother Machine Cannot Print over the Network ................ 276 I Want to Check that My Network Devices are Working Correctly ...........
Page 5 Home > Table of Contents Change Machine Settings Using Web Based Management ............343 Appendix............................348 Specifications ............................. 349 How to Enter Text on Your Brother Machine ....................357 Supplies ..............................359 Accessories..............................361 Mailbox Unit............................362 Glossary............................. 367...
Page 6: Before You Use Your Brother Machine
Home > Before You Use Your Brother Machine Before You Use Your Brother Machine • Applicable Models • Definitions of Notes • Trademarks • Important Note...
Page 7: Applicable Models
Home > Before You Use Your Brother Machine > Applicable Models Applicable Models This User's Guide applies to the following models: 1 line LCD models: HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1.8 inch Touchscreen LCD models: HL-L6400DW Related Information • Before You Use Your Brother Machine...
Page 8: Definitions Of Notes
Home > Before You Use Your Brother Machine > Definitions of Notes Definitions of Notes We use the following symbols and conventions throughout this User's Guide: WARNING indicates a potentially hazardous situation which, if not avoided, could WARNING result in death or serious injuries.
Page 9: Trademarks
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs. Any trade names and product names of companies appearing on Brother products, related documents and any other materials are all trademarks or registered trademarks of those respective companies.
Page 10: Important Note
2008 in this document represents Windows Server 2008 and Windows Server 2008 R2. • In this User's Guide, the LCD messages of the HL-L5100DN/HL-L5200DW are used unless otherwise specified. • In this User's Guide, the illustrations of the HL-L6400DW are used unless otherwise specified.
Page 11: Introduction To Your Brother Machine
Front View and Back View • Control Panel Overview • Touchscreen LCD Overview • How to Navigate the Touchscreen LCD • ® Access Brother Utilities (Windows Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on your computer.
Page 12: Before Using Your Machine
Home > Introduction to Your Brother Machine > Before Using Your Machine Before Using Your Machine Before attempting any printing operation, confirm the following: • Make sure you have installed the printer driver. • For USB or network cable users: Make sure the interface cable is physically secure.
Page 13: Front View And Back View
Home > Introduction to Your Brother Machine > Front View and Back View Front View and Back View HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW Front View Back View 1. Face down output tray support flap (support flap) 2. Face down output tray 3. Front cover release button 4.
Page 14 10. USB accessory port 11. AC power connector / cord 12. Back cover (Face up output tray) 13. Paper stopper The machine is equipped with a non-detachable AC power cord depending on the model. Related Information • Introduction to Your Brother Machine...
Page 15: Control Panel Overview
Home > Introduction to Your Brother Machine > Control Panel Overview Control Panel Overview The control panel may vary depending on your model. HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Liquid Crystal Display (LCD) Displays messages to help you set up and use the machine.
Page 16 When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless...
Page 17 (For infrastructure mode) When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access...
Page 18 (For Ad-Hoc mode) The WiFi LED is always off. Related Information • Introduction to Your Brother Machine...
Page 19: Touchscreen Lcd Overview
Displays the remaining toner life. Press to access the [Toner] menu. [Settings] Press to access the [Settings] menu. Use the Settings menu to access all of your Brother machine's settings. If Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to change settings.
Page 20 • [Web] Press to connect the Brother machine to an Internet service. For more information, see the Web Connect Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com download the guide. Warning icon The warning icon appears when there is an error or maintenance message;...
Page 21: How To Navigate The Touchscreen Lcd
Home > Introduction to Your Brother Machine > How to Navigate the Touchscreen LCD How to Navigate the Touchscreen LCD Related Models: HL-L6400DW Press your finger on the LCD to operate it. To display and access all the options, press a or b on the Touchpanel to scroll through them.
Page 22 LCD Se ngs 5. Press [Backlight]. LCD Se ngs Backlight Light Dim Timer Oﬀ 6. Press a or b to display the [Med] option, and then press [Med]. Backlight Light 7. Press Related Information • Introduction to Your Brother Machine...
Page 23: Access Brother Utilities (Windows ® )
Introduction to Your Brother Machine > Access Brother Utilities (Windows ® Access Brother Utilities (Windows Brother Utilities is an application launcher that offers convenient access to all Brother applications installed on your computer. 1. Do one of the following: ®...
Page 24 Related Information • Introduction to Your Brother Machine ® • Uninstall the Brother Software and Drivers (Windows...
Page 25: Uninstall The Brother Software And Drivers (Windows ® )
® ® • (Windows 8 and Windows Server 2012) Tap or click (Brother Utilities) either on the Start screen or the desktop. ® ® • (Windows 8.1 and Windows Server 2012 R2) Move your mouse to the lower left corner of the Start screen and click (if you are using a touch- based device, swipe up from the bottom of the Start screen to bring up the Apps screen).
Page 26: Paper Handling
Home > Paper Handling Paper Handling • Load Paper • Paper Settings • Change the Tray Size for 2‑sided Printing • Unprintable Area • Using Special Paper Always test paper samples before purchasing them to ensure desirable performance.
Page 27: Load Paper
Home > Paper Handling > Load Paper Load Paper • Load and Print Using the Paper Tray • Load and Print Using the Multi‑purpose Tray (MP Tray) You can load up to ten envelopes, letterhead, coloured paper, thin or thick paper, recycled paper, Bond paper, labels, or up to 50 sheets of plain paper in the MP tray.
Page 28: Load And Print Using The Paper Tray
Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray Load and Print Using the Paper Tray • Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper and Recycled Paper Using the Paper Tray •...
Page 29 Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper and Recycled Paper Using the Paper Tray Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper and Recycled Paper Using the Paper Tray •...
Page 30 For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray or the release lever (2) in the back of the tray, and then pull out the back of the paper tray. (Legal and Folio size paper are not available in some regions.) For trays with a release button: For trays with a release lever:...
Page 31 • When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by completing the following step: • (HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW) Press [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed]. • (HL-L6400DW) Press [Settings] > [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
Page 32 Home > Paper Handling > Load Paper > Load and Print Using the Paper Tray > Load and Print Thick Paper Using the Paper Tray Load and Print Thick Paper Using the Paper Tray • If the Check Size setting is set to On and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper size and paper type.
Page 33 For Legal or Folio size paper, press the release button (1) in the bottom of the paper tray or the release lever (2) in the back of the tray, and then pull out the back of the paper tray. (Legal and Folio size paper are not available in some regions.) For trays with a release button: For trays with a release lever:...
Page 34 8. Open the paper stopper (Available only for certain models). 9. Send your print job to the machine. Change your print preferences in the Print dialog box before sending the print job from your computer. 10. Close the paper stopper. 11.
Page 35: Load And Print Using The Multi-Purpose Tray (Mp Tray)
Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) Load and Print Using the Multi‑purpose Tray (MP Tray) You can load up to ten envelopes, letterhead, coloured paper, thin or thick paper, recycled paper, Bond paper, labels, or up to 50 sheets of plain paper in the MP tray.
Page 36 Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper, Recycled Paper and Bond Paper in the MP Tray Load and Print Plain Paper, Letterhead, Coloured Paper, Thin Paper, Recycled Paper and Bond Paper in the MP Tray When you load a different size and type of paper in the tray, you must change the Paper Size and Paper Type settings in the machine or on your computer, also.
Page 37 When you use Letterhead or Preprinted paper for 2-sided printing, change the machine's setting by completing the following step: • (HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW) Press [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed]. • (HL-L6400DW) Press [Settings] > [Paper Tray] > [2-sided] > [Single Image] > [2-sided Feed].
Page 38 Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print Thick Paper and Labels Using the MP Tray Load and Print Thick Paper and Labels Using the MP Tray When the back cover (face up output tray) is pulled down, the machine has a straight paper path from the MP tray through to the back of the machine.
Page 39 6. Load paper or labels in the MP tray. • Make sure the paper is below the maximum paper mark (1). • Load paper into the MP tray with the printing surface face up. 7. Send your print job to the machine. Change your print preferences in the Print screen before sending the print job from your computer.
Page 40 Home > Paper Handling > Load Paper > Load and Print Using the Multi‑purpose Tray (MP Tray) > Load and Print on Envelopes Using the MP Tray Load and Print on Envelopes Using the MP Tray You can load up to ten envelopes in the MP tray. Before loading, press the corners and sides of the envelopes to make them as flat as possible.
Page 41 6. Load envelopes in the MP tray. Load up to 10 envelopes in the MP tray with the printing surface face up. Make sure the envelopes are below the maximum paper mark (1). Loading more than 10 envelopes may cause paper jams. 7.
Page 42: Paper Settings
Home > Paper Handling > Paper Settings Paper Settings • Change the Paper Size and Paper Type When you change the size and type of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time.
Page 43: Change The Paper Size And Paper Type
Change the Paper Size and Paper Type When you change the size and type of the paper you load in the tray, you must change the Paper Size and Paper Type settings on the LCD at the same time. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1.
Page 44: Change The Check Paper Size Setting
When you turn on your machine's Check Size setting, the machine displays a message when you remove a paper tray or load paper using the MP tray, asking if you changed the paper size and paper type. The default setting is On. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1.
Page 45: Change The Tray Size For 2-Sided Printing
Home > Paper Handling > Change the Tray Size for 2‑sided Printing Change the Tray Size for 2‑sided Printing When you print on both sides of the paper, you must set the 2-sided tray size to the paper size. If you do not set the 2-sided tray, the paper will not feed correctly, resulting in a skewed printout or a paper jam.
Page 46: Unprintable Area
Home > Paper Handling > Unprintable Area Unprintable Area The figures below show maximum unprintable areas from the edges of the most commonly-used paper sizes. The measurements may vary depending on the paper size or settings in the application you are using. Do not attempt to print into these areas;...
Page 47: Using Special Paper
• that is designed for inkjet printing If you use any of the types of paper listed above, they may damage your machine. This damage is not covered under any Brother warranty or service agreement. Related Information • Paper Handling...
Page 48: Print
Home > Print Print • ® Print from Your Computer (Windows • Print from Your Computer (Macintosh) • Print One Page Duplicates on Different Types of Paper Use the Carbon Copy function to make multiple copies of the same print data, as if printing on carbon paper. Send the data to individual paper trays that you pre-loaded with different paper types or colours.
Page 49: Print From Your Computer (Windows ® )
® Home > Print > Print from Your Computer (Windows ® Print from Your Computer (Windows • ® Print a Document (Windows • ® Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows • ®...
Page 50: Print A Document (Windows ® )
® Print a Document (Windows 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. Make sure you have loaded the correct size paper in the paper tray.
Page 51 Related Information ® • Print from Your Computer (Windows ® • Print Settings (Windows...
Page 52: Print More Than One Page On A Single Sheet Of Paper (N In 1) (Windows ® )
® (Windows 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. In the Orientation field, select the Portrait or Landscape option to set the orientation of your printout.
Page 53: Print As A Poster (Windows ® )
Enlarge your print size and print the document in poster mode. 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.
Page 54: Print On Both Sides Of The Paper (Windows ® )
When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print quality. 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears.
Page 55 Option for Portrait Description Long Edge (Left) Long Edge (Right) Short Edge (Top) Short Edge (Bottom) Option for Landscape Description Long Edge (Top) Long Edge (Bottom)
Page 56 Option for Landscape Description Short Edge (Right) Short Edge (Left) 7. Select the Binding Offset check box if you want to specify the offset for binding in inches or millimetres. 8. Click OK. 9. Change other printer settings if needed. 10.
Page 57: Print As A Booklet (Windows ® )
When you use the manual 2-sided printing function, it is possible there may be paper jams or poor print quality. 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears.
Page 58 Option for Portrait Description Left Binding Right Binding Option for Landscape Description Top Binding Bottom Binding 7. Select one of the options from the Booklet Printing Method menu. Option Description All Pages at Every page will be printed in booklet format (four pages to every piece of paper, two pages Once per side).
Page 59: Secure Print (Windows ® )
>> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears. 3. Click the Advanced tab.
Page 60 8. Complete your print operation. 9. On the machine's control panel, press [Functions]. 10. Press [Secure]. 11. Press a or b to display user names, and then press your user name. The LCD displays the list of secured jobs for that name. 12.
Page 61: Use A Macro From Your Computer (Windows ® )
1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears.
Page 62: Use A Preset Print Profile (Windows ® )
Print Profiles are presets designed to give you quick access to frequently-used printing configurations. 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button.
Page 63 ® • Create or Delete Your Print Profile (Windows ® • Print Settings (Windows...
Page 64 Add up to 20 new print profiles with customised settings. 1. Select the print command in your application. 2. Select Brother XXX-XXXX (where XXXX is the name of your model), and then click the printing properties or preferences button. The printer driver window appears.
Page 65: Change The Default Print Settings (Windows ® )
Click Control Panel on the Start screen. In the Hardware group, click View devices and printers. 2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.
Page 66 Click Control Panel on the Start screen. In the Hardware group, click View devices and printers. 2. Right-click the Brother XXX-XXXX icon (where XXXX is your model name), and then select Printer properties. If printer driver options appear, select your printer driver.
Page 67: Print A Document Using The Br-Script3 Printer Driver (Postscript ® 3 ™ Language Emulation) (Windows ® )
Select Machine section, and then check PS Driver check box. 1. Select the print command in your application. 2. Select Brother XXX-XXXX BR-Script3 (where XXXX is the name of your model), and then click the printing properties or preferences button.
Page 68: Monitor The Status Of The Machine From Your Computer (Windows ® )
• (Windows 8 and Windows Server 2012) Click (Brother Utilities), and then click the drop-down list and select your model name (if not already selected). Click Tools in the left navigation bar, and then click Status Monitor. ® ® •...
Page 69: Print Settings (Windows ® )
® ® Home > Print > Print from Your Computer (Windows > Print Settings (Windows ® Print Settings (Windows Basic Tab 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.
Page 70 5. Resolution Select the print resolution. As print resolution and speed are related, the higher the resolution, the longer it will take to print the document. 6. Print Settings Select the type of document you want to print. Manual Settings... Specify advanced settings such as brightness, contrast, and other settings.
Page 71 9. Paper Source Select the paper source setting according to your print conditions or purpose. First Page Select the paper source to use for printing the first page. Other Pages Select the paper source to use for printing the second and subsequent pages. Advanced Tab 1.
Page 72 3. Use Watermark Select this option to print a logo or text on your document as a watermark. Select one of the preset watermarks, add a new watermark, or use an image file you have created. 4. Header-Footer Print Select this option to print the date, time and PC login user name on the document. 5.
Page 73 Related Information ® • Print from Your Computer (Windows ® • Print a Document (Windows ® • Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows ® • Print as a Poster (Windows ® •...
Page 74: Print From Your Computer (Macintosh)
Home > Print > Print from Your Computer (Macintosh) Print from Your Computer (Macintosh) • Print a Document (Macintosh) • Print on Both Sides of the Paper (Macintosh) • Print More Than One Page on a Single Sheet of Paper (N in 1) (Macintosh) •...
Page 75: Print A Document (Macintosh)
1. Make sure you have loaded the correct size paper in the paper tray. 2. From an application, such as Apple TextEdit, click the File menu, and then select Print. 3. Select Brother XXX-XXXX (where XXXX is your model name). 4. Type the number of copies you want in the Copies field.
Page 76: Print On Both Sides Of The Paper (Macintosh)
1. From an application, such as Apple TextEdit, click the File menu, and then select Print. 2. Select Brother XXX-XXXX (where XXXX is your model name). 3. Select the Orientation option that matches the way you want the document to print.
Page 77 h. Click the application pop-up menu, and then select Paper Handling. The Paper Handling options appear. In the Pages to Print pop-up menu, select Odd Only. Click Print. Related Information • Print from Your Computer (Macintosh) • Print Options (Macintosh)
Page 78: Print More Than One Page On A Single Sheet Of Paper (N In 1) (Macintosh)
(Macintosh) 1. From an application, such as Apple TextEdit, click the File menu, and then select Print. 2. Select Brother XXX-XXXX (where XXXX is your model name). 3. Click the application pop-up menu, and then select Layout. The Layout setting options appear.
Page 79: Secure Print (Macintosh)
1. From an application, such as Apple TextEdit, click the File menu, and then select Print. 2. Select Brother XXX-XXXX (where XXXX is your model name). 3. Click the application pop-up menu, and then select the Secure Print option. The Secure Print options appear.
Page 80 After you print the secured data, it will be cleared from the machine's memory. Related Information • Print from Your Computer (Macintosh)
Page 81: Print A Document Using The Br-Script3 Printer Driver (Postscript ® 3 ™ Language Emulation) (Macintosh)
(Macintosh) ® The BR-Script3 printer driver lets you print PostScript data more clearly. • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com to download the PS driver (BR-Script3 printer driver). • Make sure you have added the BR-Script3 printer driver from Print & Scan or Printers & Scanners in the System Preferences list on your Macintosh.
Page 82: Monitor The Status Of The Machine From Your Computer (Macintosh)
Click the Troubleshooting button to access the troubleshooting website. Visit the Genuine Supplies website Click the Visit the Genuine Supplies website button for more information on Brother genuine supplies. Updating the machine's status To view the latest machine status while the Status Monitor window is open, click the icon.
Page 83: Print Options (Macintosh)
Home > Print > Print from Your Computer (Macintosh) > Print Options (Macintosh) Print Options (Macintosh) Page Setup 1. Paper Size Select the size of the paper you want to use. You can either choose from standard paper sizes or create a custom paper size.
Page 84 Layout 1. Pages per Sheet Select the number of pages to print on a single sheet of paper. 2. Layout Direction Select the page order when printing multiple pages on a single sheet of paper. 3. Border Select the type of border to use when printing multiple pages on a single sheet of paper. 4.
Page 85 Paper Handling 1. Collate pages Select this option to print sets of multi-page documents in the original page order. When this option is selected, one complete copy of your document will print, and then reprint according to the number of copies you choose.
Page 86 Print Settings 1. Media Type Select the type of media you want to use. To achieve the best print results, the machine automatically adjusts its print settings according to the selected media type. 2. Print Quality Select the print resolution you want. Because print quality and speed are related, the higher the quality, the longer it will take to print the document.
Page 87 Sleep Time Specify the amount of time that passes before the machine enters Sleep Mode. Quiet Mode Select this option to reduce printing noise. Other Print Options Skip Blank Page Select this option to allow the printer driver to automatically detect blank pages and exclude them from printing.
Page 88 Related Information • Print from Your Computer (Macintosh) • Print a Document (Macintosh) • Print on Both Sides of the Paper (Macintosh) • Print More Than One Page on a Single Sheet of Paper (N in 1) (Macintosh) • Use Standard Tray When Full •...
Page 89: Print One Page Duplicates On Different Types Of Paper
If you enable the Carbon Copy function, the machine will always make copies automatically. ® (Windows The carbon copy function also allows you to select a different printing macro for each page. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [Print Menu] option, and then press OK.
Page 90 Related Information • Print ® • Use a Macro from Your Computer (Windows...
Page 91: Cancel A Print Job
Home > Print > Cancel a Print Job Cancel a Print Job >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press Cancel. To cancel multiple print jobs, press and hold Cancel for four seconds. HL-L6400DW 1. Press To cancel multiple print jobs, press and hold for four seconds.
Page 92: Test Print
> Test Print Test Print If there are problems with print quality, follow these instructions to do a test print. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [Machine Info.] option, and then press OK.
Page 93: Network
• Get Started We recommend setting up and connecting to your network using the Brother installation CD-ROM. This section provides more information about network connection types, introduces various methods to manage your network and explains some useful network features of your Brother machine.
Page 94: Get Started
> Get Started Get Started We recommend setting up and connecting to your network using the Brother installation CD-ROM. This section provides more information about network connection types, introduces various methods to manage your network and explains some useful network features of your Brother machine.
Page 95: Supported Basic Network Features
® and Windows 8 only) • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com download the latest version of Brother's BRAdmin Light. • Go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 96: Network Management Software And Utilities
Home > Network > Network Management Software and Utilities Network Management Software and Utilities Configure and change your Brother machine's network settings using a management utility. • Learn about Network Management Software and Utilities • Change Machine Settings from Your Computer •...
Page 97: Learn About Network Management Software And Utilities
LAN. BRAdmin Professional 3 can also log activity of Brother devices on your network and export the log data in an HTML, CSV, TXT, or SQL format. For users who want to monitor locally-connected machines, install the Print Auditor Client software on the client computer.
Page 98: Additional Methods Of Configuring Your Brother Machine For A Wireless Network
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network Additional Methods of Configuring Your Brother Machine for a Wireless Network To connect your machine to your wireless network, we recommend using the Installation CD-ROM.
Page 99: Before Configuring Your Brother Machine For A Wireless Network
• Although the Brother machine can be used in both a wired and wireless network (supported models only), only one connection method can be used at a time. However, a wireless network connection and Wi-Fi Direct connection, or a wired network connection (supported models only) and Wi-Fi Direct connection can be used at the same time.
Page 100: Configure Your Machine For A Wireless Network
Network > Configure Your Machine for a Wireless Network Configure Your Machine for a Wireless Network Related Models: HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Turn on your computer and put the Brother Installation CD-ROM into your CD-ROM drive. ® • For Windows , follow these instructions.
Page 101: Configure Your Machine For A Wireless Network Using The One Push Method Of Wi-Fi Protected Setup ™ (Wps)
If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 102 You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com to install drivers and software necessary for operating your device.
Page 103: Configure Your Machine For A Wireless Network Using The Pin Method Of Wi-Fi Protected Setup ™ (Wps)
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless ™ Network > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup (WPS) Configure Your Machine for a Wireless Network Using the PIN Method ™...
Page 104 Routers or access points that support WPS are marked with this symbol: >> HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5200DW/HL-L6200DW 1. Press a or b to select the [Network] option, and then press OK. 2. Press a or b to select the [WLAN] option, and then press OK. 3.
Page 105 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 106 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 107: Configure Your Machine For A Wireless Network In Ad-Hoc Mode (For Ieee 802.11B/G/N)
Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured SSID, use these instructions.
Page 108 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 109 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 110 Configure Your Machine for a Wireless Network in Ad-Hoc Mode Using an Existing SSID Related Models: HL-L5200DW/HL-L6200DW/HL-L6400DW If you are trying to pair your Brother machine to a computer that is already in Ad-Hoc mode and has a configured SSID, use these instructions. >> HL-L5200DW/HL-L6200DW >>...
Page 111 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 112 Related Information • Configure Your Machine for a Wireless Network in Ad-Hoc Mode (For IEEE 802.11b/g/n) • How to Enter Text on Your Brother Machine • Wireless LAN Report Error Codes...
Page 113: Configure Your Machine For A Wireless Network Using The Machine's Control Panel Setup Wizard
WEP key only. • If you need assistance during setup and want to contact Brother customer service, make sure you have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.
Page 114 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 115 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 116: Configure Your Machine For A Wireless Network When The Ssid Is Not Broadcast
WPA2-PSK 12345678 If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. 2. Press a or b to select the [Network] option, and then press OK.
Page 117 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 118 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 119: Configure Your Machine For An Enterprise Wireless Network
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for an Enterprise Wireless Network Configure Your Machine for an Enterprise Wireless Network Related Models: HL-L5200DW/HL-L6200DW/HL-L6400DW >> HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5200DW/HL-L6200DW Before configuring your machine, we recommend writing down your wireless network settings.
Page 120 User ID Password Mode Method Infrastructure EAP-FAST/MS- Brother 12345678 CHAPv2 • If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate.
Page 121 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 122 User ID Password Mode Method Infrastructure EAP-FAST/MS- Brother 12345678 CHOPv2 • If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate.
Page 123 If your wireless device is connected successfully, the machine's LCD displays [Connected]. You have completed the wireless network setup. To install drivers and software necessary for operating your device, insert the Brother Installation CD-ROM to your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com...
Page 124: Use Wi-Fi Direct
Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use ® Wi-Fi Direct ® Use Wi-Fi Direct • Print from Your Mobile Device Using Wi-Fi Direct • Configure Your Wi-Fi Direct Network Configure your Wi-Fi Direct network settings from your machine's control panel.
Page 125 Wi-Fi Direct is one of the wireless configuration methods developed by the Wi-Fi Alliance . It allows you to ™ configure a secured wireless network between your Brother machine and a mobile device, such as an Android ® device, Windows Phone device, iPhone, iPod touch, or iPad, without using an access point.
Page 126 Configure your Wi-Fi Direct network settings from your machine's control panel. • Wi-Fi Direct Network Configuration Overview The following instructions offer five methods for configuring your Brother machine in a wireless network environment. Select the method you prefer for your environment. •...
Page 127 Method of Wi-Fi Protected Setup (WPS). To use Brother iPrint&Scan functionality in a Wi-Fi Direct network configured by one-push configuration using Wi- Fi Direct or by PIN Method configuration using Wi-Fi Direct, the device you use to configure Wi-Fi Direct must be ™...
Page 128 • Configure Your Wi-Fi Direct Network Manually...
Page 129 • When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Press a or b to select the mobile device you want to connect to and press OK.
Page 130 Related Information • Configure Your Wi-Fi Direct Network • Wi-Fi Direct Network Configuration Overview...
Page 131 Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > ® Wi-Fi Direct > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One- ™ Push Method and Wi-Fi Protected Setup...
Page 132 • Wi-Fi Direct Network Configuration Overview...
Page 133 Search for available devices again by pressing [Rescan], and then go to the next step. 7. Do one of the following: • Press a to display the PIN on your Brother machine, enter the PIN in your mobile device, and then go to the next step. •...
Page 134 4. Do one of the following: • When your Brother machine is the Group Owner (G/O), it will wait for a connection request from your mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the machine.
Page 135 Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > ® Wi-Fi Direct > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the PIN ™ Method of Wi-Fi Protected Setup...
Page 136 Brother Solutions Center at support.brother.com to see the Mobile Print/Scan Guide for Brother iPrint&Scan. Related Information • Configure Your Wi-Fi Direct Network • Wi-Fi Direct Network Configuration Overview...
Page 137 Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > ® Wi-Fi Direct > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Manually Configure Your Wi-Fi Direct Network Manually Related Models: HL-L5200DW/HL-L6200DW/HL-L6400DW >>...
Page 138: Advanced Network Features
Home > Network > Advanced Network Features Advanced Network Features • Print the Network Configuration Report The Network Configuration Report lists the network configuration, including the network print server settings. • Print the WLAN Report The WLAN Report reflects your machine's wireless status. If the wireless connection fails, check the error code on the printed report.
Page 139: Print The Network Configuration Report
2. Press [OK]. 3. Press Related Information • Advanced Network Features • Where Can I Find My Brother Machine's Network Settings? ® • Use the Network Connection Repair Tool (Windows • I Want to Check that My Network Devices are Working Correctly •...
Page 140: Print The Wlan Report
Related Information • Advanced Network Features • Wireless LAN Report Error Codes • My Brother Machine Cannot Print over the Network • I Want to Check that My Network Devices are Working Correctly...
Page 141 • If your WLAN access point/router is using MAC address filtering, confirm that the MAC address of the Brother machine is allowed in the filter. 2. If you manually entered the SSID and security information (SSID/authentication method/ encryption method/Network Key), the information may be incorrect.
Page 142 The security information (SSID/Network Key) is incorrect. Confirm the SSID and Network Key. If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. TS-06 The wireless security information (Authentication method/Encryption method/Network Key) is incorrect.
Page 143: Configure The Sntp Protocol Using Web Based Management
> Configure the SNTP Protocol Using Web Based Management Configure the SNTP Protocol Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Configure the SNTP protocol to synchronize the time the machine uses for authentication with the time kept by the SNTP time server.
Page 144 Option Description Primary SNTP Server Type the server address (up to 64 characters). Address The secondary SNTP server address is used as a backup to the primary Secondary SNTP Server SNTP server address. If the primary server is unavailable, the machine will Address contact the secondary SNTP server.
Page 145: Technical Information For Advanced Users
Home > Network > Technical Information for Advanced Users Technical Information for Advanced Users • Gigabit Ethernet (Wired Network Only) • Reset the Network Settings to the Factory Settings You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
Page 146: Gigabit Ethernet (Wired Network Only)
Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network Only) Gigabit Ethernet (Wired Network Only) Related Models: HL-L6200DW/HL-L6400DW Your machine supports 1000BASE-T Gigabit Ethernet. To connect to a 1000BASE-T Gigabit Ethernet Network, you must set the machine’s Ethernet link mode to Auto from the machine’s control panel or Auto from Web Based Management (web browser).
Page 147 Home > Network > Technical Information for Advanced Users > Gigabit Ethernet (Wired Network Only) > Configure the Gigabit Ethernet Settings Using Web Based Management Configure the Gigabit Ethernet Settings Using Web Based Management Related Models: HL-L6200DW/HL-L6400DW 1. Start your web browser. 2.
Page 148: Reset The Network Settings To The Factory Settings
Settings Reset the Network Settings to the Factory Settings Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
Page 149: Security
Lock the Machine Settings Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password, you must reset all passwords stored in the machine by contacting your administrator or Brother customer service. •...
Page 150: Lock The Machine Settings
Lock the Machine Settings Before turning on the machine's Access Lock, make a careful note of your password. If you forget the password, you must reset all passwords stored in the machine by contacting your administrator or Brother customer service. •...
Page 151: About Using Setting Lock
Home > Security > Lock the Machine Settings > About Using Setting Lock About Using Setting Lock Use the Setting Lock feature to block unauthorised access to machine settings. When Setting Lock is set to [On], you cannot access the machine settings without entering the password. •...
Page 152 > About Using Setting Lock > Set the Setting Lock Password Set the Setting Lock Password >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Setting Lock] option, and then press OK.
Page 153 About Using Setting Lock > Change the Setting Lock Password Change the Setting Lock Password >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Setting Lock] option, and then press OK.
Page 154 > About Using Setting Lock > Turn Setting Lock On Turn Setting Lock On >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [General Setup] option, and then press OK. 2. Press a or b to display the [Setting Lock] option, and then press OK.
Page 155: Network Security Features
Before Using Network Security Features Your Brother machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security plan to help protect your data and prevent unauthorised access to the machine.
Page 156: Before Using Network Security Features
Before Using Network Security Features Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Your Brother machine employs some of the latest network security and encryption protocols available today. These network features can be integrated into your overall network security plan to help protect your data and prevent unauthorised access to the machine.
Page 157: Secure Function Lock 3.0
Security > Network Security Features > Secure Function Lock 3.0 Secure Function Lock 3.0 Brother's Secure Function Lock 3.0 increases security by restricting the functions available on your Brother machine. • Before Using Secure Function Lock 3.0 • Configure Secure Function Lock 3.0 Using Web Based Management •...
Page 158: Before Using Secure Function Lock 3.0
> Before Using Secure Function Lock 3.0 Before Using Secure Function Lock 3.0 Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Use Secure Function Lock to configure passwords, set specific user page limits, and grant access to some or all of the functions listed here.
Page 159: Configure Secure Function Lock 3.0 Using Web Based Management
> Configure Secure Function Lock 3.0 Using Web Based Management Configure Secure Function Lock 3.0 Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 160: Configure Public Mode For Secure Function Lock 3.0
Secure Function Lock 3.0 Configure Public Mode for Secure Function Lock 3.0 Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Use the Secure Function Lock screen to set up Public Mode, which limits the functions available to public users. Public users will not need to enter a password to access the features made available through Public Mode settings.
Page 161: Additional Secure Function Lock 3.0 Features
> Additional Secure Function Lock 3.0 Features Additional Secure Function Lock 3.0 Features Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Configure the following features in the Secure Function Lock screen: All Counter Reset Click All Counter Reset, in the Page Counters column, to reset the page counter.
Page 162: Register A New Id Card Using Machine's Control Panel
2. Press [Register Card]. 3. Touch a new ID Card to the NFC logo. The new ID Card's number is registered to the machine. For the supported ID Card types, go to the Brother Solutions Center at support.brother.com to see FAQs &...
Page 163: Use Active Directory ® Authentication
® Home > Security > Network Security Features > Use Active Directory Authentication ® Use Active Directory Authentication • ® Introduction to Active Directory Authentication • ® Configure Active Directory Authentication Using Web Based Management • ® Log On to Change the Machine Settings Using the Machine's Control Panel (Active Directory Authentication)
Page 164 Related Models: HL-L6400DW ® ® Active Directory Authentication restricts the use of your Brother machine. If Active Directory Authentication is enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a User ID and password.
Page 165 Select this option to store incoming print data. After you log on to the machine, your PC print jobs will be printed automatically. This feature is available only for print data created by a Brother native printer driver. Remember User ID Select this option to save your User ID.
Page 166 ® Home > Security > Network Security Features > Use Active Directory Authentication > Log On to Change ® the Machine Settings Using the Machine's Control Panel (Active Directory Authentication) Log On to Change the Machine Settings Using the Machine's Control ®...
Page 167: Use Ldap Authentication
Home > Security > Network Security Features > Use LDAP Authentication Use LDAP Authentication • Introduction to LDAP Authentication • Configure LDAP Authentication Using Web Based Management • Log On to Change the Machine Settings Using the Machine's Control Panel (LDAP Authentication)
Page 168 Introduction to LDAP Authentication Related Models: HL-L6400DW LDAP Authentication restricts the use of your Brother machine. If LDAP Authentication is enabled, the machine's control panel will be locked. You cannot change the machine's settings until you enter a User ID and password.
Page 169 Storage PC Print Data Select this option to store incoming print data. After you log on to the machine, your PC print jobs will be printed automatically. This feature is available only for print data created by a Brother native printer driver. Remember User ID Select this option to save your User ID.
Page 170 Home > Security > Network Security Features > Use LDAP Authentication > Log On to Change the Machine Settings Using the Machine's Control Panel (LDAP Authentication) Log On to Change the Machine Settings Using the Machine's Control Panel (LDAP Authentication) Related Models: HL-L6400DW When LDAP Authentication is enabled, the machine's control panel will be locked until you enter your User ID and password on the machine's control panel.
Page 171: Manage Your Network Machine Securely Using Ssl/Tls
Introduction to SSL/TLS • Certificates and Web Based Management You must configure a certificate to manage your networked Brother machine securely using SSL/TLS. You must use Web Based Management to configure a certificate. • Manage Your Network Machine Securely Using Web Based Management To manage your network machine securely, you must use management utilities with security protocols.
Page 172 > Introduction to SSL/TLS Introduction to SSL/TLS Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Secure Socket Layer (SSL) or Transport Layer Security (TLS) is an effective method of protecting data sent over a local or wide area network (LAN or WAN). It works by encrypting data, such as a print job, sent over a network, so anyone trying to capture it will not be able to read it.
Page 173 Introduction to SSL/TLS > Brief History of SSL/TLS Brief History of SSL/TLS Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW SSL/TLS was originally created to secure web traffic information, particularly data sent between web browsers ® and servers. For example, when you use Internet Explorer for Internet Banking and you see https:// and the little padlock icon in the web browser, you are using SSL.
Page 174 Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW The primary benefit of using SSL/TLS on Brother machines is to guarantee secure printing over an IP network by restricting unauthorised users from reading data sent to the machine. SSL's key selling point is that it can be used to print confidential data securely.
Page 175 Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management Certificates and Web Based Management You must configure a certificate to manage your networked Brother machine securely using SSL/TLS. You must use Web Based Management to configure a certificate. •...
Page 176 > Supported Security Certificate Features Supported Security Certificate Features Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Your Brother machine supports the use of multiple security certificates, which allows secure management, authentication, and communication with the machine. The following security certificate features can be used with the machine: •...
Page 177 If you do not have a certificate from an external trusted CA, create a Certificate Signing Request (CSR), send it to a CA for authentication, and install the returned certificate on your machine. • Import and Export a CA Certificate You can import, export and store CA certificates on your Brother machine.
Page 178 Certificate from a CA 1. Create a Certificate Signing Request (CSR) using Web Based Management. 2. Install the certificate issued by the CA on your Brother machine using Web Based Management. 3. Install the certificate on your computer. Related Information •...
Page 179 • ® Install the Self-signed Certificate for Windows users with Administrator Rights • Import and Export the Self-signed Certificate on your Brother Machine You can store the self-signed certificates on your Brother machine and manage them by importing and exporting.
Page 180 Create and Install a Self- signed Certificate > Create a Self-signed Certificate Create a Self-signed Certificate Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 181 17. Click Yes to restart your print server. The self-signed certificate is created and saved in your machine's memory. To use SSL/TLS comunication, the self-signed certificate must be installed on your computer. Related Information • Create and Install a Self-signed Certificate...
Page 182 > Install the Self-signed Certificate for Windows users with Administrator Rights ® Install the Self-signed Certificate for Windows users with Administrator Rights Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW ® ® The following steps are for Microsoft Internet Explorer . If you use another web browser, consult the documentation for your web browser to get help with installing certificates.
Page 183 4. Click Continue to this website (not recommended). ® ® (Windows XP and Windows Server 2003) When the following dialog box appears, click View Certificate, and then go to step 6. 5. Click Certificate Error, and then click View certificates.
Page 184 6. Click Install Certificate..7. When the Certificate Import Wizard appears, click Next. 8. Select Place all certificates in the following store, and then click Browse..
Page 185 9. Select Trusted Root Certification Authorities, and then click OK. 10. Click Next. 11. Click Finish. 12. Click Yes, if the fingerprint (thumbprint) is correct.
Page 186 The fingerprint (thumbprint) is printed on the Network Configuration Report. 13. Click OK. The self-signed certificate is now installed on your computer, and SSL/TLS communication is available. Related Information • Create and Install a Self-signed Certificate...
Page 187 > Import and Export the Self-signed Certificate on your Brother Machine Import and Export the Self-signed Certificate on your Brother Machine You can store the self-signed certificates on your Brother machine and manage them by importing and exporting. • Import the Self-signed Certificate •...
Page 188 Create and Install a Certificate > Create and Install a Self- signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Import the Self- signed Certificate Import the Self-signed Certificate Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser.
Page 189 Create and Install a Certificate > Create and Install a Self- signed Certificate > Import and Export the Self-signed Certificate on your Brother Machine > Export the Self- signed Certificate Export the Self-signed Certificate Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser.
Page 190 A Certificate Signing Request (CSR) is a request sent to a Certificate Authority (CA) to authenticate the credentials contained within the certificate. • Install a Certificate on Your Brother Machine When you receive a certificate from a CA, follow the steps below to install it into the print server: •...
Page 191 Certificate from a Certificate Authority (CA) > Create a Certificate Signing Request (CSR) Create a Certificate Signing Request (CSR) Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW A Certificate Signing Request (CSR) is a request sent to a Certificate Authority (CA) to authenticate the credentials contained within the certificate.
Page 192 Web Server for the certificate template to securely create the Client Certificate. If you are creating a Client Certificate for an IEEE 802.1x environment with EAP-TLS authentication, we recommend using User for the certificate template. For more information, go to your model's page on the Brother Solutions Center at support.brother.com. Related Information •...
Page 193 > Create and Install a Certificate from a Certificate Authority (CA) > Install a Certificate on Your Brother Machine Install a Certificate on Your Brother Machine Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW When you receive a certificate from a CA, follow the steps below to install it into the print server: Only a certificate issued with your machine's CSR can be installed onto the machine.
Page 194: Import And Export The Certificate And Private Key
Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/ > Certificates and Web Based Management > Create and Install a Certificate > Create and Install a Certificate from a Certificate Authority (CA) > Import and Export the Certificate and Private Key Import and Export the Certificate and Private Key Store the certificate and private key on your machine and manage them by importing and exporting them.
Page 195 > Import a Certificate and Private Key Import a Certificate and Private Key Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 196 > Export the Certificate and Private Key Export the Certificate and Private Key Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 197: Import And Export A Ca Certificate
Create and Install a Certificate > Import and Export a CA Certificate Import and Export a CA Certificate You can import, export and store CA certificates on your Brother machine. • Import a CA Certificate • Export a CA Certificate...
Page 198 Import and Export a CA Certificate > Import a CA Certificate Import a CA Certificate Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 199 Import and Export a CA Certificate > Export a CA Certificate Export a CA Certificate Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 200 In Web Based Management, navigate to the Certificate or CA Certificate screen to view certificate content, delete, or export your certificates. Maximum Number of Certificates Stored UP on Brother Machine Self-signed Certificate or Certificate Issued by a CA CA Certificate We recommend storing one less certificate than allowed, reserving an empty spot in case of certificate expiration.
Page 201 > Manage Your Network Machine Securely Using Web Based Management Manage Your Network Machine Securely Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW To manage your network machine securely, you must use management utilities with security protocols. We recommend using the HTTPS protocol for secure management. To use this protocol, HTTPS must be enabled on your machine.
Page 202 In this mode, the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother applications in this mode. However, it is not secure since it will not authenticate the user, and data will not be encrypted.
Page 203 To use BRAdmin Professional 3 utility, you must: • Use the latest version of BRAdmin Professional 3. Go to your model's Downloads page on the Brother Solutions Center at support.brother.com. If you use an older version of BRAdmin to manage your Brother machines, the user authentication will not be secure.
Page 204 Manage Your Network Machine Securely Using SSL/ > Print Documents Securely Using SSL/TLS Print Documents Securely Using SSL/TLS Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW To print documents securely with IPP protocol, use the IPPS protocol. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 205: Manage Your Network Machine Securely Using Ipsec
Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec Manage Your Network Machine Securely Using IPsec • Introduction to IPsec IPsec (Internet Protocol Security) is a security protocol that uses an optional Internet Protocol function to prevent manipulation and ensure the confidentiality of data transmitted as IP packets.
Page 206 • Your Brother machine is configured for IPsec communication. • The computer connected to your Brother machine is configured for IPsec connections. • IPsec settings The settings that are necessary for connections using IPsec. These settings can be configured using Web Based Management.
Page 207 IPsec > Configure IPsec Using Web Based Management Configure IPsec Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW The IPsec connection conditions are comprised of two Template types: Address and IPsec. You can configure up to 10 connection conditions. 1. Start your web browser.
Page 208 IKE is a protocol that is used to exchange encryption keys in order to carry out encrypted communication using IPsec. In Main mode, the processing speed is slow, but the security is high. In Aggressive mode, the processing speed is faster than Main mode, but the security is lower. 9.
Page 209 > Configure an IPsec Address Template Using Web Based Management Configure an IPsec Address Template Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 210 • IP Address / Prefix Specify the IP address using CIDR notation. For example: 192.168.1.1/24 Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.xxx are valid. 10. Select a Remote IP Address option to specify the IP address conditions for the recipient: •...
Page 211 > Configure an IPsec Template Using Web Based Management Configure an IPsec Template Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 212 Related Information • Manage Your Network Machine Securely Using IPsec • IKEv1 Settings for an IPsec Template • IKEv2 Settings for an IPsec Template...
Page 213 • Manual Settings for an IPsec Template...
Page 214 Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > IKEv1 Settings for an IPsec Template IKEv1 Settings for an IPsec Template Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW...
Page 215 Template Name Type a name for the template (up to 16 characters). Use Prefixed Template Select Custom, IKEv1 High Security or IKEv1 Medium Security. The setting items are different depending on the selected template. The default template differs depending on whether you chose Main or Aggressive for Negotiation Mode on the IPsec configuration screen.
Page 216 When AH+ESP is selected in Protocol, select each protocol for Hash(AH) and Hash(ESP). • SA Lifetime Specify the IPsec SA lifetime. Type the time (seconds) and number of kilobytes (KByte) before the IPsec SA will expire. • Encapsulation Mode Select Transport or Tunnel. •...
Page 217 Home > Security > Network Security Features > Manage Your Network Machine Securely Using IPsec > Configure an IPsec Template Using Web Based Management > IKEv2 Settings for an IPsec Template IKEv2 Settings for an IPsec Template Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW...
Page 218 Template Name Type a name for the template (up to 16 characters). Use Prefixed Template Select Custom, IKEv2 High Security, or IKEv2 Medium Security. The setting items are different depending on the selected template. Internet Key Exchange (IKE) IKE is a communication protocol that is used to exchange encryption keys in order to carry out encrypted communication using IPsec.
Page 219 SA (Security Association) is an encrypted communication method using IPsec or IPv6 that exchanges and shares information, such as the encryption method and encryption key, in order to establish a secure communication channel before communication begins. SA may also refer to a virtual encrypted communication channel that has been established.
Page 220 Related Information • Configure an IPsec Template Using Web Based Management...
Page 221 Configure an IPsec Template Using Web Based Management > Manual Settings for an IPsec Template Manual Settings for an IPsec Template Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Template Name Type a name for the template (up to 16 characters). Use Prefixed Template Select Custom.
Page 222 that is necessary for IPsec is determined and the encryption keys are shared. For IKE, the encryption keys are exchanged using the Diffie-Hellman key exchange method, and encrypted communication that is limited to IKE is carried out. Select Manual. Authentication Key (ESP,AH) Specify the key to use for authentication.
Page 223 • ESP is a protocol for carrying out encrypted communication using IPsec. ESP encrypts the payload (communicated contents) and adds additional information. The IP packet is comprised of the header and the encrypted payload, which follows the header. In addition to the encrypted data, the IP packet also includes information regarding the encryption method and encryption key, the authentication data, and so on.
Page 224: Send An Email Securely
Home > Security > Network Security Features > Send an Email Securely Send an Email Securely • Configure Email Sending Using Web Based Management • Send an Email with User Authentication • Send an Email Securely Using SSL TLS...
Page 225 > Configure Email Sending Using Web Based Management Configure Email Sending Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW We recommend using Web Based Management to configure secured email sending with user authentication, or email sending using SSL/TLS. 1. Start your web browser.
Page 226 Send an Email with User Authentication Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Your Brother machine supports the SMTP-AUTH method to send email via an email server that requires user authentication. This method prevents unauthorised users from accessing the email server. You can use the SMTP-AUTH method for email notification and email reports (available for certain models).
Page 227 Send an Email Securely Using SSL TLS Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Your Brother machine supports SSL/TLS methods to send an email via an email server that requires secure SSL/TLS communication. To send email via an email server that is using SSL/TLS communication, you must configure SMTP over SSL/TLS.
Page 228: Port Number
Port Number If you select SSL, the Port value will be changed to match the protocol. To change the port number manually, type the port number after you choose SSL/TLS. You must configure your machine's SMTP communication method to match the method used by your email server.
Page 229: Use Ieee 802.1X Authentication For A Wired Or A Wireless Network
Home > Security > Network Security Features > Use IEEE 802.1x Authentication for a Wired or a Wireless Network Use IEEE 802.1x Authentication for a Wired or a Wireless Network • What Is IEEE 802.1x Authentication? • Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) •...
Page 230 IEEE 802.1x is an IEEE standard for wired and wireless networks that limits access from unauthorised network devices. Your Brother machine (supplicant) sends an authentication request to a RADIUS server (Authentication server) through your access point or HUB. After your request has been verified by the RADIUS server, your machine can access the network.
Page 231 Management (Web Browser) Configure IEEE 802.1x Authentication for a Wired or a Wireless Network Using Web Based Management (Web Browser) Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW • If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration.
Page 232 • To enable IEEE 802.1x authentication for wired networks, select Enabled for Wired 802.1x status on the Wired 802.1x Authentication page. • If you are using EAP-TLS authentication, you must select the client certificate that has been installed (shown with certificate name) for verification from the Client Certificate drop-down list. •...
Page 233 Extensible Authentication Protocol-Flexible Authentication via Secured Tunneling (EAP-FAST) has been developed by Cisco Systems, Inc., which uses a user ID and password for authentication, and symmetric key algorithms to achieve a tunnelled authentication process. The Brother machine supports the following inner authentication methods: • EAP-FAST/NONE •...
Page 234: Store Print Log To Network
Home > Security > Network Security Features > Store Print Log to Network Store Print Log to Network • Store Log to Network Overview • Configure the Store Print Log to Network Settings Using Web Based Management • Use the Store Print Log to Network's Error Detection Setting Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the server due to a network error.
Page 235 Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a network server using the Common Internet File System (CIFS) protocol. You can record the ID, type of print job, job name, user name, date, time and the number of printed pages for every print job.
Page 236 Network Settings Using Web Based Management Configure the Store Print Log to Network Settings Using Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
Page 237 You can also confirm the error status on the LCD of your machine. 9. Click Submit to display the Test Print Log to Network page. To test your settings, click Yes and then go to the next step. To skip the test, click No. Your settings will be submitted automatically. 10.
Page 238 Network's Error Detection Setting Use the Store Print Log to Network's Error Detection Setting Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the server due to a network error.
Page 239: Mobile/Web Connect
™ Print with Mopria • Print from a Mobile Device Use Brother iPrint&Scan to print from various mobile devices. • Print Using Near-Field Communication (NFC) Near-Field Communication (NFC) allows for simple transactions, data exchange, and wireless connections between two devices that are in close range of each other.
Page 240: Use Web Services From Your Brother Machine
The following services can be accessed from your Brother machine: Google Drive , Dropbox, OneDrive Box. For more information, see the Web Connect Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com. Related Information •...
Page 241: Print With Google Cloud Print
1. Print request 2. Internet ™ 3. Google Cloud Print 4. Printing For more information, see the Google Cloud Print Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com. Related Information • Mobile/Web Connect...
Page 242: Print With Airprint
1. Print request 2. Printed photos, emails, web pages, and documents For more information, see the AirPrint Guide. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com. Related Information •...
Page 243: Print With Mopria
™ Home > Mobile/Web Connect > Print with Mopria ™ Print with Mopria Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW ™ ™ ™ Mopria Print Service is a print feature on Android mobile devices (Android version 4.4 or later) developed ™ by the Mopria Alliance.
Page 244: Print From A Mobile Device
Download and install Brother iPrint&Scan from the Google Play Store. • For iOS Devices Brother iPrint&Scan allows you to use features of your Brother machine directly from your iPhone, iPod touch, iPad, and iPad mini. Download and install Brother iPrint&Scan from the App Store. ®...
Page 245: Print Using Near-Field Communication (Nfc)
You must download and install Brother iPrint&Scan on your Android device to use this feature. For more information, see the Mobile Print/Scan Guide for Brother iPrint&Scan. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com. Related Information •...
Page 246: Troubleshooting
Home > Troubleshooting Troubleshooting Use this section to resolve typical problems you may encounter when using your Brother machine. You can correct most problems yourself. IMPORTANT For technical help, you must call Brother customer service or your local Brother dealer.
Page 247: Error And Maintenance Messages
NFC feature, touch your device to the NFC logo on your Brother machine to access the Brother Solutions Center and browse the latest FAQs from your device. (Your mobile telephone provider's message and data rates may apply.) ™...
Page 248 Error Message Cause Action Drum ! The corona wire on the drum unit Clean the corona wire on the drum unit. must be cleaned. See Related Information: Clean the Corona Wire. If the problem continues, replace the drum unit with a new one. The drum unit or the toner Remove the drum unit, remove the toner cartridge and drum unit assembly...
Page 249 • If the problem continues, contact Brother customer service. Replace Drum It is time to replace the drum unit. Replace the drum unit with a new one.
Page 250 Reinstall the toner cartridge and drum unit assembly in the machine. If the problem continues, contact Brother customer service or your local Brother dealer. Cooling Down The temperature of the inside of Make sure you can hear the fan in the the machine is too hot.
Page 251 Error Message Cause Action Drum ! The corona wire on the drum unit Clean the corona wire on the drum unit. must be cleaned. See Related Information: Clean the Corona Wire. If the problem continues, replace the drum unit with a new one. The drum unit or the toner Remove the drum unit, remove the toner cartridge and drum unit assembly...
Page 252 • If the problem continues, contact Brother customer service. Replace Toner The toner cartridge is at the end of Replace the toner cartridge with a new one.
Page 253 Error Message Cause Action Screen Init. Fail The Touchscreen was pressed Make sure nothing is touching the before the power on initialisation Touchscreen. was completed. Debris may be stuck between the Insert a piece of stiff paper between the lower lower part of the Touchscreen and part of the Touchscreen and its frame and its frame.
Page 254 Related Information • Troubleshooting • Replace Supplies • Load and Print Using the Paper Tray • Load and Print Using the Multi‑purpose Tray (MP Tray) • Replace the Drum Unit • Clean the Corona Wire...
Page 255: Paper Jams
Home > Troubleshooting > Paper Jams Paper Jams Always remove the remaining paper from the paper tray and straighten the stack when you are adding new paper. This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents paper jams.
Page 256: Paper Is Jammed In The Mp Tray
4. Reload paper in the MP tray and make sure the paper stays under the maximum paper height guides (1) on both sides of the tray. 5. Do one of the following: • (HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW) Press Go to resume printing. • (HL-L6400DW) Press [Retry] to resume printing.
Page 257: Paper Is Jammed In The Paper Tray
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Paper Tray Paper is Jammed in the Paper Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the paper tray, follow these steps: 1.
Page 258 5. Put the paper tray firmly back in the machine. Related Information • Paper Jams...
Page 259: Paper Is Jammed In The Back Of The Machine
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Back of the Machine Paper is Jammed in the Back of the Machine If the machine's control panel or the Status Monitor indicates that there is a jam in the back (Rear) of the machine, follow these steps: 1.
Page 260 5. Close the fuser cover. 6. Close the back cover until it locks in the closed position. Related Information • Paper Jams...
Page 261: Paper Is Jammed Inside The Machine
Home > Troubleshooting > Paper Jams > Paper is Jammed inside the Machine Paper is Jammed inside the Machine If the machine's control panel or the Status Monitor indicates that there is a jam inside the machine, follow these steps: 1.
Page 262 6. Close the front cover. Related Information • Paper Jams...
Page 263: Paper Is Jammed In The 2-Sided Tray
Home > Troubleshooting > Paper Jams > Paper is Jammed in the 2-sided Tray Paper is Jammed in the 2-sided Tray If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps: 1.
Page 264 6. If paper is not caught inside the 2-sided tray, open the back cover. WARNING HOT SURFACE The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them. 7. Use both hands to gently pull the jammed paper out of the back of the machine. 8.
Page 265: Paper Is Jammed In The Mailbox Unit
Home > Troubleshooting > Paper Jams > Paper is Jammed in the Mailbox Unit Paper is Jammed in the Mailbox Unit Related Models: HL-L6400DW If the machine's control panel or the Status Monitor indicates that there is a jam in the Mailbox unit, follow these steps: 1.
Page 266: Printing Problems
• Windows XP and Windows Server 2003 Click the Start > Printers and Faxes. Right-click Brother XXX-XXXX. Make sure Use Printer Online is not listed. If it is listed, click this option to set the driver Online. ® ® •...
Page 267 Check the settings in your application to make sure they are set up to work with your machine. Confirm that the Brother printer driver is selected in your application's Print window. The machine prints the first couple of pages correctly, Check the settings in your application to make sure they then some pages have missing text.
Page 268: Improve The Print Quality
IMPORTANT Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability. 1. To get the best print quality, we suggest using recommended print media. Make sure you use paper that meets our specifications.
Page 269 Examples of poor print quality Recommendation Toner specks • The fuser unit may be contaminated. Contact Brother customer service. • Select Thick Paper mode in the printer driver or use thinner paper than you are currently using. • Select the appropriate media type in the menu setting.
Page 270 Printed pages have toner stains down the page • The fuser unit may be contaminated. Contact Brother customer service. • Make sure foreign material such as a torn piece of paper, sticky notes or dust is not inside the machine and around the toner cartridge and drum unit.
Page 271 Examples of poor print quality Recommendation • Check the paper type and quality. High temperatures and high humidity will cause paper to curl. • If you do not use the machine often, the paper may have been in the paper tray too long. Turn over the stack of paper in the paper tray.
Page 272: Network Problems
Troubleshooting > Network Problems Network Problems • Error Messages Your Brother machine will display an error message if an error occurs. The most common error messages are shown in the table. • ® Use the Network Connection Repair Tool (Windows Use the Network Connection Repair Tool to fix the Brother machine's network settings.
Page 273: Error Messages
Troubleshooting > Network Problems > Error Messages Error Messages Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Your Brother machine will display an error message if an error occurs. The most common error messages are shown in the table. HL-L5100DN/HL-L5200DW/HL-L6200DW Error Messages Cause Action Authentication Your authentication setting for •...
Page 274 Move the mobile device closer to your Brother mobile device cannot machine. communicate during the Wi-Fi • Move your Brother machine and the mobile device to Direct network configuration. an obstruction-free area. • If you are using the PIN Method of WPS, make sure you have entered the correct PIN.
Page 275 Make sure your server is connected to the network. server. • Make sure the machine is connected to the network. Wrong Date & Time, The Brother machine does not • Make sure the settings to access the SNTP time contact your obtain the time from the SNTP server are configured correctly in Web Based administrator.
Page 276: Use The Network Connection Repair Tool (Windows ® )
> Use the Network Connection Repair Tool (Windows ® Use the Network Connection Repair Tool (Windows Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and Subnet Mask. ® ®...
Page 277 • I Want to Check that My Network Devices are Working Correctly...
Page 278: Where Can I Find My Brother Machine's Network Settings
Home > Troubleshooting > Network Problems > Where Can I Find My Brother Machine's Network Settings? Where Can I Find My Brother Machine's Network Settings? • Print the Network Configuration Report The Network Configuration Report lists the network configuration, including the network print server settings.
Page 279: I Cannot Complete The Wireless Network Setup Configuration
Wi-Fi Direct), try the one-push configuration using WPS (recommended) and set the Brother machine as a G/O. Your Brother machine is Move your Brother machine within about 3.3 feet (1 metre) of the Wi-Fi Direct placed too far from your mobile device when you configure the Wi-Fi Direct network settings.
Page 280 Brother machine or the mobile device. If you have checked and • Turn your Brother machine off and back on. Then try to configure Wi-Fi Direct tried all of the above, but still the Wi-Fi Direct settings again. cannot complete the Wi-Fi •...
Page 281: My Brother Machine Cannot Print Over The Network
Verify that both the IP addresses and Subnet Masks of your IP address. computer and the Brother machine are correct and located on the same network. For more information about how to verify the IP address and the Subnet Mask, ask your network administrator.
Page 282 Print the WLAN Report to check the error code on the printed report. Wireless not connected to the wireless network. If you have checked and tried all of the above, but your Brother machine still cannot print, uninstall the printer driver and reinstall it. Related Information •...
Page 283: I Want To Check That My Network Devices Are Working Correctly
Network Status or Wireless Link Status is Link OK. Configuration Report. Check that you can Ping the Brother machine from your computer using the IP address or Wired/Wireless "ping" the Brother ® the node name in the Windows...
Page 284: Other Problems
EPS data that includes binary. You can print the EPS data at the machine through a network. For help installing the BR-Script3 printer driver through the network, go to the Brother Solutions Center at support.brother.com. The Brother software cannot be installed.
Page 285 Related Information • Troubleshooting...
Page 286: Check The Machine Information
Home > Troubleshooting > Check the Machine Information Check the Machine Information Follow these instructions to check your Brother machine's serial number and firmware version. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to select the [Machine Info.] option, and then press OK.
Page 287 Option Description Print a list of the machine’s internal fonts. Print Font Check your machine's serial number. Serial No. Check your machine's firmware version. Version Check the number of total pages the machine has printed. Page Count Check the percentage of the supplies' life that remains available. Parts Life 3.
Page 288: Reset Functions
Home > Troubleshooting > Reset Functions Reset Functions • Network Reset Use the Network Reset function to restore the print server's network settings, such as password and IP address, back to its default factory settings. • Factory Reset Use the Factory Reset function to restore all settings back to the factory settings.
Page 289: Network Reset
> Reset Functions > Network Reset Network Reset Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW Use the Network Reset function to restore the print server's network settings, such as password and IP address, back to its default factory settings. • Unplug all the interface cables before you perform a Network Reset.
Page 290: Factory Reset
Factory Reset Use the Factory Reset function to restore all settings back to the factory settings. Unplug all the interface cables before you perform a Factory Reset. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to select the [Reset Menu] option, and then press OK.
Page 291: Routine Maintenance
Home > Routine Maintenance Routine Maintenance • Replace Supplies You must replace supplies when the machine indicates that the life of the supply is over. • Clean the Machine Clean the outside and inside of the machine regularly with a dry, lint-free cloth. •...
Page 292: Replace Supplies
Replace Supplies You must replace supplies when the machine indicates that the life of the supply is over. Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability. • The toner cartridge and drum unit are two separate supplies. Make sure both are installed as an assembly.
Page 293 NOTE • Availability of toner cartridges differs from one country to another. Go to the Brother Solutions Center at support.brother.com or contact your local Brother office for further details.
Page 294 Related Information • Routine Maintenance • Replace the Toner Cartridge • Replace the Drum Unit • Error and Maintenance Messages • Supplies...
Page 295: Replace The Toner Cartridge
Home > Routine Maintenance > Replace Supplies > Replace the Toner Cartridge Replace the Toner Cartridge 1. Make sure the machine is turned on. 2. Open the front cover. 3. Remove the toner cartridge and drum unit assembly from the machine. 4.
Page 296 Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 8. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
Page 297 Brother Original replacement toner cartridges. Use or attempted use of third party toner and/or cartridges in the Brother machine may cause damage to the machine and/or may result in unsatisfactory print quality. Our limited warranty coverage does not apply to any problem that is caused by the use of third party toner and/or cartridges.
Page 298: Replace The Drum Unit
Home > Routine Maintenance > Replace Supplies > Replace the Drum Unit Replace the Drum Unit 1. Make sure the machine is turned on. 2. Open the front cover. 3. Remove the toner cartridge and drum unit assembly from the machine. 4.
Page 299 The machine should be used only in a clean, dust-free environment with adequate ventilation. Printing with a non-Brother drum unit may reduce not only the print quality but also the quality and life of the machine itself. Warranty coverage does not apply to problems caused by the use of a non-Brother drum unit.
Page 300: Clean The Machine
Home > Routine Maintenance > Clean the Machine Clean the Machine Clean the outside and inside of the machine regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth.
Page 301 • Clean the Drum Unit • Clean the Paper Pick-up Rollers...
Page 302: Clean The Touchscreen Lcd
Home > Routine Maintenance > Clean the Machine > Clean the Touchscreen LCD Clean the Touchscreen LCD Related Models: HL-L6400DW IMPORTANT DO NOT use any type of liquid cleaners (including ethanol). 1. Press and hold to turn the machine off. 2.
Page 303: Clean The Corona Wire
Home > Routine Maintenance > Clean the Machine > Clean the Corona Wire Clean the Corona Wire If you have print quality problems or the control panel displays [Drum !] status, clean the corona wire. 1. Open the front cover. 2.
Page 304: Clean The Drum Unit
Clean the Drum Unit If your printout has dots or other repeating marks at 94 mm intervals, the drum may have foreign material, such as glue from a label, stuck on the drum surface. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Make sure the machine is in Ready Mode.
Page 305 10. Use the numbered markers next to the drum roller to find the mark on the drum. For example, a dot in column 2 on the check sheet means that there is a mark in drum region “2”. 11. Turn the edge of the drum unit toward you while looking at the drum surface to find the mark. •...
Page 306 12. Wipe the surface of the drum gently with a dry cotton swab until the mark on the surface comes off. NOTE DO NOT clean the surface of the photosensitive drum with a sharp object or any liquids. 13. Put the toner cartridge firmly into the drum unit until you hear it lock into place. Make sure you put the toner cartridge in correctly or it may separate from the drum unit.
Page 307 6. Remove the toner cartridge and drum unit assembly from the machine. 7. Push down the green lock lever and take the toner cartridge out of the drum unit. 8. Turn the drum unit as shown in the illustration. Make sure that the drum unit gear is on the left side. 9.
Page 308 10. Turn the edge of the drum unit toward you while looking at the drum surface to find the mark. • To avoid print quality problems, DO NOT touch the surface of the drum unit, only the edge. • You can turn the drum unit gear more easily by pulling down the black levers. When you have finished turning the gear, push the levers back to the original position.
Page 309 Make sure you put the toner cartridge in correctly or it may separate from the drum unit. 13. Install the toner cartridge and drum unit assembly back into the machine. 14. Close the front cover of the machine. 15. Press to turn the machine on.
Page 310: Clean The Paper Pick-Up Rollers
Home > Routine Maintenance > Clean the Machine > Clean the Paper Pick-up Rollers Clean the Paper Pick-up Rollers Cleaning the paper pick-up rollers periodically may prevent paper jams by ensuring that paper feeds properly. If you have paper feed problems, clean the pick-up rollers as follows: 1.
Page 311: Check The Remaining Life Of Parts
Home > Routine Maintenance > Check the Remaining Life of Parts Check the Remaining Life of Parts >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [Machine Info.] option, and then press OK. 2. Press a or b to select the [Parts Life] option, and then press OK.
Page 312: Pack And Ship Your Machine
Home > Routine Maintenance > Pack and Ship Your Machine Pack and Ship Your Machine There are two ways to pack and ship your machine. To determine which you should follow, check the machine's original packing material for a toner pad. •...
Page 313: Pack The Machine And The Toner Cartridge Together
Home > Routine Maintenance > Pack and Ship Your Machine > Pack the Machine and the Toner Cartridge Together Pack the Machine and the Toner Cartridge Together WARNING • When you move the machine, carry the machine as shown in the illustration below. •...
Page 314 5. Close the carton and tape it shut. 6. If you have a Lower Tray, repack it as shown. Related Information • Pack and Ship Your Machine...
Page 315: Pack The Machine And The Toner Cartridge Separately
Home > Routine Maintenance > Pack and Ship Your Machine > Pack the Machine and the Toner Cartridge Separately Pack the Machine and the Toner Cartridge Separately WARNING • When you move the machine, carry the machine as shown in the illustration below. •...
Page 316 6. Install only the drum unit back into the machine. 7. Close the front cover. 8. Put the machine into the bag it originally came in. 9. Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the original packing material as shown.
Page 317 Related Information • Pack and Ship Your Machine...
Page 318: Machine Settings
Home > Machine Settings Machine Settings Customise settings and features, create shortcuts, and work with options displayed on the machine's LCD to make your Brother machine a more efficient work tool. • Change Machine Settings from the Control Panel •...
Page 319: Change Machine Settings From The Control Panel
Home > Machine Settings > Change Machine Settings from the Control Panel Change Machine Settings from the Control Panel • General Settings • Settings and Features Tables The Settings tables will help you understand the menu selections and options that are found in the machine’s programs.
Page 320: General Settings
Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings General Settings • Adjust the Machine's Volume • Set Sleep Mode Countdown The Sleep Mode (or Power Save Mode) setting can reduce power consumption. Select how long the machine must be idle before it goes into Sleep Mode.
Page 321 Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the Machine's Volume Adjust the Machine's Volume Related Models: HL-L6400DW 1. Press [Settings] > [General Setup] > [Volume] > [Beep]. 2. Press a or b to display the [Off], [Low], [Med] or [High] option, and then press the option you want. 3.
Page 322: Set Sleep Mode Countdown
When the machine is in Sleep Mode, it acts as if it is turned off. The machine will wake up and start printing when it receives a print job. Use these instructions to set a time delay (countdown) before the machine enters Sleep Mode. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1.
Page 323 Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > About Deep Sleep Mode About Deep Sleep Mode If the machine is in Sleep Mode and does not receive any jobs for certain length of time, the machine will automatically enter Deep Sleep Mode.
Page 324 • To start printing, press on the control panel and then send a print job. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW Select how long the machine must be in Deep Sleep Mode before it goes into Auto Power Off Mode.
Page 325 Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust the LCD Backlight Brightness Adjust the LCD Backlight Brightness Related Models: HL-L6400DW If you are having difficulty reading the LCD, changing the brightness setting may help. 1.
Page 326 Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change How Long the LCD Backlight Stays On Change How Long the LCD Backlight Stays On Related Models: HL-L6400DW Set how long the LCD backlight stays on after you return to the LCD's Home screen. 1.
Page 327 Using the Toner Save feature may reduce toner consumption. When Toner Save is set to on, the print on your documents appears lighter. We DO NOT recommend using the Toner Save feature for printing photo or greyscale images. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1.
Page 328 Reduce Printing Noise The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower. The factory setting is off. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [General Setup] option, and then press OK.
Page 329 Change the Language on the LCD Change the LCD language if needed. This feature is not available in some countries. >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW 1. Press a or b to display the [General Setup] option, and then press OK.
Page 330: Settings And Features Tables
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables Settings and Features Tables The Settings tables will help you understand the menu selections and options that are found in the machine’s programs. •...
Page 331 > Access Menus and Change Your Machine's Settings Access Menus and Change Your Machine's Settings Related Models: HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW Use the control panel to access the machine's menus and change various settings. 1. Scroll through each menu level by pressing a or b.
Page 332: Machine Info
Tables > Settings Tables (1 Line LCD models) Settings Tables (1 Line LCD models) Related Models: HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW Use these tables to understand the various menus and options that you will use to set your preferences on the machine. [Machine Info.]...
Page 333 Level 1 Level 2 Description Separator Tray - Select the tray that contains the paper used as the separator paper, which is inserted between each print job. 2-sided 2-sided Select whether to print on both sides of the paper. Print Single Image For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time.
Page 334: Print Menu
Level 1 Level 2 Description Interface Auto IF Time Set the time-out period for the auto interface selection. Input Buffer Increase or decrease the input buffer capacity. Inputprime Select if you want to use the signal of parallel ports as a reset. (Available only for certain models) Delete Storage Macro ID...
Page 335 Level 1 Level 2 Description HP LaserJet Tray Command Select this setting if a tray mismatch appears when you use the HP drivers. Epson FX-850 Font No. Set the font number. Font Pitch Set the font pitch. The Font Pitch menu appears when you choose I012 to I018, I031 to I037 or I097 to I109 in Font No.
Page 336 Copy2 Macro … Select a macro for Copy2 to 8. Copy8 Macro The menu appears when printing two pages or more. (Available only for certain models) [Network] (HL-L5100DN) Level 1 Level 2 Description TCP/IP Boot Method Choose the IP method that best suits your needs.
Page 337 Enable or disable the IPv6 protocol. Setup Wizard Configure the wireless network settings using the setup wizard. WLAN Assistant - Configure your wireless network settings using the Brother CD-ROM. Configure your wireless network settings using the one- button push method. WPS w/PIN Code - Configure the wireless network settings using WPS with a PIN code.
Page 338 Level 1 Level 2 Level 3 Description Wi-Fi Direct Status Info. Speed Display the connection speed when the Status is G/O Active or Client Active. I/F Enable Enable or disable the Wi-Fi Direct connection. IPsec IPsec is an optional security feature of the IP protocol that provides authentication and encryption services.
Page 339 Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (1.8 inch Touchscreen models) Settings Tables (1.8 inch Touchscreen models) Related Models: HL-L6400DW [Settings] > [Machine Information] Level 2 Level 3 Descriptions Print Settings Print the Printer Settings page.
Page 340: Single Image
Level 2 Level 3 Descriptions Skip Tray Select a specific tray you do not want to use; if it is loaded with paper of the wrong size. Separator Tray Select the tray that contains the paper used as the separator paper, which is inserted between each print job.
Page 341 Level 2 Level 3 Level 4 Descriptions Setting Lock Set Password Restrict unauthorised users from changing the machine’s settings. Lock Off⇒On Interface Select Select the interface to use. If you select Auto, the machine changes the interface to USB or Network depending on which interface is receiving data. Auto IF Time Set the time-out period for the auto interface selection.
Page 342 Level 2 Level 3 Descriptions HP LaserJet Bottom Margin Set the bottom margin distance from the bottom edge of the paper. Lines Set the number of lines on each page. Tray Command Select this setting if a tray mismatch appears when you use the HP drivers. Epson FX-850 Font No.
Page 343 Level 2 Level 3 Descriptions Carbon Menu Copy1 Tray Select the tray you use for Copy1. Copy1 Macro Select a macro for Copy1. Select the tray you use for Copy2 to 8. Copy2 Tray... Copy8 Tray The menu appears when printing two pages or more. Select a macro for Copy2 to 8.
Page 344 Setup Wizard Configure the wireless network settings using the setup wizard. WLAN Configure your wireless network settings Assistant using the Brother CD-ROM. Configure your wireless network settings using the one-button push method. WPS w/ PIN Configure the wireless network settings Code using WPS with a PIN code.
Page 345 Level 2 Level 3 Level 4 Level 5 Descriptions Web Connect Proxy Proxy Connection - Change the web connection settings. Settings Settings Address Port User Name Password Security IPsec IPsec is an optional security feature of the IP protocol that provides authentication and encryption services.
Page 346 OneDrive Web services may have been added and service names may have been changed by the provider since this document was published. Google Go to your model's Manuals page on the Brother Solutions Center at support.brother.com ™ Drive download the Web Connect Guide.
Page 347: Change Machine Settings From Your Computer
Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). • Where Can I Find My Brother Machine's Network Settings? • Network Management Software and Utilities Configure and change your Brother machine's network settings using a management utility.
Page 348: Change Machine Settings Using Web Based Management
Set a Login Password for Web Based Management We recommend setting a login password to prevent unauthorised access to Web Based Management. • Network Management Software and Utilities Configure and change your Brother machine's network settings using a management utility.
Page 349 • The following explanations are examples. The available functions vary according to the model. General Use this tab to confirm the current status of your Brother machine and to change basic settings, such as the timer settings. Print Use this tab to confirm and change the print settings.
Page 350 Related Information • Change Machine Settings Using Web Based Management...
Page 351 > Change Machine Settings Using Web Based Management > Access Web Based Management Access Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW • We recommend using the HTTPS security protocol when configuring settings using Web Based Management. • When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box.
Page 352: Set Login Password (Web Based Management)
Using Web Based Management > Set a Login Password for Web Based Management Set a Login Password for Web Based Management Related Models: HL-L5100DN/HL-L5200DW/HL-L6200DW/HL-L6400DW We recommend setting a login password to prevent unauthorised access to Web Based Management. 1. Start your web browser.
Page 353: Appendix
Home > Appendix Appendix • Specifications • How to Enter Text on Your Brother Machine • Supplies • Accessories...
Page 354: Specifications
Specifications General Specifications Printer Type Laser Print Method Electrophotographic Laser Printer Memory Capacity Standard (For Australia and New Zealand) • (HL-L5100DN/HL-L5200DW/HL-L6200DW) 256 MB • (HL-L6400DW) 512 MB (For Middle Eastern, African countries and other countries) • (HL-L5000D/HL-L5100DN/HL-L5200DW) 512 MB •...
Page 355 Approximately 375 W at 25 °C (Quiet Mode) • (Except Taiwan) Approximately 390 W at 25 °C Approximately 32 W at 25 °C Ready • (HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW) Sleep (For Taiwan) Approximately 6.7 W (Except Taiwan) Approximately 6.5 W • (HL-L6400DW) (For Taiwan) Approximately 7.2 W...
Page 356 (HL-L6400DW) * 400 ** 288 *** 396 Weights (with supplies) • (HL-L5000D) 11.1 kg • (HL-L5100DN/HL-L5200DW) (For Australia and New Zealand) 10.7 kg (For Other countries) 11.1 kg • (HL-L6200DW) (For Australia and New Zealand) 12.0 kg (For Other countries) 12.4 kg...
Page 357: Print Media Specifications
Noise Level Sound Pressure Printing • (HL-L5000D/HL-L5100DN/HL-L5200DW) LpAm = 52.0 dB (A) • (HL-L6200DW/HL-L6400DW) LpAm = 54.0 dB (A) Printing LpAm = 50.0 dB (A) (Quiet Mode) Ready • (HL-L5000D/HL-L5100DN/HL-L5200DW) LpAm = 34.0 dB (A) • (HL-L6200DW/HL-L6400DW) LpAm = 35.0 dB (A)
Page 358 • HL-L5000D/HL-L5100DN/HL-L5200DW :You can install up tp two Lower Trays 250 sheets (LT-5500) or 520 sheets (LT-6500). HL-L6200DW/HL-L6400DW :You can install up to two Lower Trays 250 sheets (LT-5500/LT-5505) or 520 sheets (LT-6500/LT-6505) or three Lower Trays 250 sheets (LT-5500/LT-5505) For labels, we recommend removing the printed sheets from the output paper tray immediately after they exit the machine to avoid the possibility of smudging.
Page 359: Printer Specifications
Print speed may be slower when the machine is connected by wireless LAN. From Ready mode and standard tray If the parallel cable is not provided with the machine in your country or region, please contact Brother customer service or your local Brother dealer to purchase the optional parallel cable (PC-5000).
Page 360: Supported Protocols And Security Features
HL-L5100DN/HL-L5200DW 10BASE-T/100BASE-TX HL-L6200DW/HL-L6400DW 15 16 10BASE-T/100BASE-TX/1000Base-T Wireless LAN HL-L5200DW/HL-L6200DW/ IEEE 802.11b/g/n (Infrastructure/Ad-hoc Mode) HL-L6400DW IEEE 802.11g/n (Wi-Fi Direct) HL-L6400DW Supported Protocols and Security Features Ethernet 10Base-T/100Base-TX/1000Base-T Wireless LAN IEEE 802.11b/g/n (Infrastructure Mode/Ad-hoc Mode), IEEE 802.11g/n (Wi-Fi Direct) Protocols (IPv4) ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS Resolver, mDNS, LLMNR...
Page 361 HL-L5100DN/HL-L5200DW support 10Base-T/100Base-TX HL-L6200DW/HL-L6400DW support 10Base-T/100Base-TX/1000Base-T HL-L5200DW/HL-L6200DW/HL-L6400DW For the latest driver updates, go to your model's Downloads page on the Brother Solutions Center at support.brother.com. All trademarks, brand and product names are the property of their respective companies. Related Information •...
Page 362: How To Enter Text On Your Brother Machine
Home > Appendix > How to Enter Text on Your Brother Machine How to Enter Text on Your Brother Machine >> HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW >> HL-L6400DW HL-L5000D/HL-L5100DN/HL-L5200DW/HL-L6200DW When setting certain options, such as the Network Key, you must enter characters on the machine: •...
Page 363 • Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast...
Page 364: Supplies
When the time comes to replace supplies, such as the toner or drum, an error message will appear on your machine's control panel or in the Status Monitor. For more information about the supplies for your machine, visit http://www.brother.com/original/index.html or contact your local Brother dealer. • The toner cartridge and drum unit are two separate parts.
Page 365 (For Australia and New Approximately 8,000 pages Zealand) (A4 or Letter page) HL-L6400DW (For Middle Eastern, African countries and other countries) HL-L5000D/HL-L5100DN/ HL-L5200DW/HL-L6200DW (For Taiwan) Approximately 12,000 pages (A4 or Letter page) HL-L6400DW (For Middle Eastern, African Approximately 20,000 pages...
Page 366: Accessories
> Accessories Accessories Availability of accessories may vary depending on your country or region. For more information about the accessories for your machine, visit http://www.brother.com/original/index.html or contact your Brother dealer or Brother customer service. Model Name Item Applicable Models LT-5500 (Grey)
Page 367: Mailbox Unit
• Sorter: When printing multiple copies, set the printer driver to eject each copy into a different bin. Set your preferences for Stacker (MX Stacker) and Sorter (MX Sorter) in your printer driver or on your Brother machine’s LCD. ®...
Page 368 ® • Print Settings (Windows • Print Options (Macintosh)
Page 369 Home > Appendix > Accessories > Mailbox Unit > Use Standard Tray When Full Use Standard Tray When Full Related Models: HL-L6400DW The Use Std. Tray when full feature allows a large print job to continue printing, even if the Mailbox bins are full. If you select this option in your printer driver, the machine continues the print job, ejecting the remaining pages onto the machine's main output tray when the Mailbox bins are full.
Page 370 Home > Appendix > Accessories > Mailbox Unit > Mailbox Continue Mailbox Continue Related Models: HL-L6400DW If a print job stopped because all the bins are full, the MX (Mailbox) Continue feature allows the machine to resume the print job after you remove the printed pages from any of the printout locations. Setting Description Your machine resumes the print job using the first empty...
Page 371 This setting's name is for Windows and may vary for Macintosh depending on your country. Anyone using your Brother machine can send a print job to a specific bin but the administrator must assign the bins to users or groups first.
Page 372: Glossary
Home > Glossary Glossary This is a comprehensive list of features and terms that appear in Brother manuals. Availability of these features depends on the model you purchased. A B C D E G H I L M N O P R S T V W •...
Page 373 Home > Glossary • HTTP (Web Server) • HTTPS • IEEE 802.1x • Infrastructure Mode • IP Address • • IPPS • IPsec • IPv6 • LEAP • LLMNR • • • MAC Address • mDNS • NetBIOS Name Resolution •...
Page 374 Home > Glossary • RARP • Resolution • Secure Function Lock 3.0 • Settings Tables • Shared Key Cryptosystem • SMTP Client • SMTP over SSL • SMTP-AUTH • SNMP • SNMPv3 • SNTP • SSID • SSL/TLS • Status Monitor •...
Page 375 (how the data is encrypted as it is sent on the network). If you do not correctly specify these options when you are configuring your Brother wireless machine, it will not be able to connect to the wireless network.
Page 376 LAN. BRAdmin Professional 3 can also log activity of Brother devices on your network and export the log data in an HTML, CSV, TXT, or SQL format. For users who want to monitor locally-connected machines, install the Print Auditor Client software on the client computer.
Page 377 Home > Glossary items, such as page counts, toner and drum status, and the firmware version. In addition to reporting to Brother network management applications, this utility can email the usage and status information directly to a predefined email address in a CSV or XML file format (SMTP Mail support required). The BRPrint Auditor utility also supports email notification for reporting warning and error conditions.
Page 378: Dns Client
(how the data is encrypted as it is sent on the network). If you do not correctly specify these options when you are configuring your Brother wireless machine, it will not be able to connect to the wireless network.
Page 379: Infrastructure Mode
Hypertext Transfer Protocol (HTTP) is used to transmit the data between a web server and a web browser. The Brother print server is equipped with a built-in web server that allows you to monitor its status or change some of its configuration settings using a web browser.
Page 380: Mac Address
MAC Address The MAC Address (Ethernet Address) is a unique number assigned for the machine's network interface. mDNS Multicase DNS (mDNS) allows the Brother print server to configure itself to work in an OS X Simple Network Configuration system automatically.
Page 381: Network Configuration Report
Network Connection Repair Tool The Network Connection Repair Tool is a program Brother provides to correct the driver's settings so that they match the machine's network settings. To use the Network Connection Repair Tool, ask your network administrator.
Page 382: Settings Tables
Protocols Protocols are the standardised sets of rules for transmitting data on a network. Protocols allow users to gain access to network-connected resources. The print server used on your Brother machine supports the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol. Public Key Cryptosystem A Public Key Cryptosystem is a modern branch of cryptography in which the algorithms employ a pair of keys (a public key and a private key) and use a different component of the pair for different steps of the algorithm.
Page 383: Smtp Client
SNMP The Simple Network Management Protocol (SNMP) is used to manage network devices including computers, routers and Brother network-ready machines. The Brother print server supports SNMPv1, SNMPv2c and SNMPv3. SNMPv3 Simple Network Management Protocol version 3 (SNMPv3) provides user authentication and data encryption to manage network devices securely.
Page 384: Status Monitor
Store Print Log to Network The Store Print Log to Network feature allows you to save the print log file from your Brother machine to a network server using CIFS.
Page 385: Web Based Management
Home > Glossary Web Based Management A standard Web Browser can be used to manage your machine using the Hyper Text Transfer Protocol (HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS). You can perform the function listed or get the following information from a machine on your network using a web browser: •...
Page 386 ® WPA-PSK/WPA2-PSK authentication method enables a Wi-Fi Protected Access Pre-shared key (WPA-PSK/ WPA2-PSK), which enables the Brother wireless machine to associate with access points using TKIP for WPA- PSK or AES for WPA-PSK and WPA2-PSK (WPA-Personal). ™ Wi-Fi Protected Setup (WPS) is a standard that allows the setup of secured wireless networks.
Page 387 Visit us on the World Wide Web www.brother.com These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries. OCE/ASA/SAF/GLF/TWN Version 0...

This manual is also suitable for:

Hl-l5000d Hl-l5200dw Hl-l6200dw Hl-l6400dw

Brother HL-L5100DN User Manual

Before You Use Your Brother Machine

Introduction to Your Brother Machine

Paper Handling

Print

Network

Security

Mobile/Web Connect

Troubleshooting

Routine Maintenance

Machine Settings

Appendix

Glossary

Quick Links

Related Manuals for Brother HL-L5100DN

Summary of Contents for Brother HL-L5100DN