Zanussi zes3921iba User Manual page 16
Hide thumbs
Also See for zes3921iba:
- User manual (60 pages) ,
- User manual (44 pages) ,
- User manual (56 pages)
Table of Contents
Advertisement
Available languages
Available languages
Connection cable
• The hob is supplied with a connection cable.
• To replace the damaged mains cable use
the following (or higher) mains cable type:
H05V2V2-F Tmax 90°C. Speak to your local
Service Centre.
Installation of more than one hob
min. 650 mm
If several 30 cm hobs are to be installed side by
side into the same cut out, an assembly kit
including a support side bracket and
supplementary seals is available at our
Authorised Service Centres. The relevant
installation instructions are supplied within the
kit package.
Assembly
R 5mm
+1
490
mm
min.
55mm
16
490 mm
270 mm
+1
270
mm
Place the sealing gasket A all around the edge
of the cut out.
Fit the hob in the cut out and push it down until
comes in contact with the kitchen top surface.
then remove the excess sealing.
A
min.
28 mm
www.zanussi.com
Advertisement
Chapters
Table of Contents
