Table of Contents
Advertisement
HTTPS Access configuration
Command: /cfg/sys/access/https
[https Menu]
access
port
generate - Generate self-signed HTTPS server certificate
certSave - save HTTPS certificate
cur
The following table describes the HTTPS Access Configuration menu options.
Table 78 HTTPS Access Configuration menu options
Command
access enable|disable
port <TCP port number>
generate
certSave
cur
Watchdog configuration
Command: /cfg/sys/watchdog
[Watchdog Menu]
interval - Set watchdog timeout interval
enable
disable
cur
The following table describes the HTTPS Access Configuration menu options.
Table 79 Watchdog Configuration menu options
Command
interval <5-120>
enable
disable
cur
- Enable/Disable HTTPS Web access
- HTTPS WebServer port number
- Display current SSL Web Access configuration
Description
Enables or disables BBI access (Web access) using HTTPS. The default value is
disabled.
Defines the HTTPS Web server port number. The default is 443.
Allows you to generate a certificate to connect to the SSL to be used during the key
exchange. A default certificate is created when HTTPS is enabled for the first time.
The user can create a new certificate defining the information that they want to be
used in the various fields. For example:
•
Country Name (2 letter code) [ ]: JP
•
State or Province Name (full name) [ ]: Tokyo
•
Locality Name (for example, city) [ ]: Fuchu
•
Organization Name (for example, company) [ ]: NEC
•
Organizational Unit Name (for example, section) [ ]: SIGMABLADE
•
Common Name (for example, user's name) [ ]: Taro
•
Email (for example, email address) [ ]: info@nec.com
You must confirm if you want to generate the certificate. It takes approximately
30 seconds to generate the certificate. Then the switch restarts SSL agent.
Allows the client, or the Web browser, to accept the certificate and save the
certificate to Flash to be used when the switch is rebooted.
Displays the current SSL Web Access configuration.
- Enable Watchdog
- Disable Watchdog
- Display current Watchdog configuration
Description
Sets the watchdog timeout interval. The default is 30 seconds.
Enables watchdog. The default is enabled.
Disables watchdog.
Displays the current Watchdog configuration.
Command Line Interface 77
Advertisement
Table of Contents
