Table of Contents
Advertisement
Quick Links
LCD4020-2 Installation Guide
40" LCD Display
Contents:
Product Description
Type:
LCD Display
Resolution:
1366 x 768
Aspect Ratio:
16:9
FCC:
Class B
Power Consumption: 175W (max)
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Landscape 20deg
www.necdisplay.com
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Screen Surface: Anti-Reflective
Dimensions:
Weight:
BTU's:
Max. 20 deg
LCD4020-2
36.2"(W) x 21.0"(H) x 5.5"(D)
64.8 lbs
597 BTU/hour
Page 1 of 9
Rev 1.0
Advertisement
Table of Contents
Related Manuals for NEC LCD4020-2
Summary of Contents for NEC LCD4020-2
-
Page 1: Table Of Contents
Distances may vary ±5%. Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in the landscape position only. Landscape 20deg www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3... -
Page 2: Ventilation Requirements
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. -
Page 3: Display Dimensions
NEC Display Solutions of America, Inc. LCD4020-2 Installation Guide 40” LCD Display Rev 1.0 Display dimensions (PANEL DISPLAY AREA) www.necdisplay.com LCD4020-2 Page 3 of 9... -
Page 4: Rear & Bottom
NEC Display Solutions of America, Inc. LCD4020-2 Installation Guide 40” LCD Display Rev 1.0 Display dimensions (cont.) 100mm MOUNTING HOLE PATTERN AC Inlet Power Switch www.necdisplay.com LCD4020-2 Page 4 of 9... -
Page 5: Display Dimensions W/Optional Speakers And Stand
NEC Display Solutions of America, Inc. LCD4020-2 Installation Guide 40” LCD Display Rev 1.0 Dimensions with optional speakers and stand www.necdisplay.com LCD4020-2 Page 5 of 9... -
Page 6: Optional Table Top Stand Dimensions
LCD4020-2 Installation Guide 40” LCD Display Optional Table Top Stand Dimensions (ST-4020) 3.52 4.94 www.necdisplay.com 3.48 0.83 0.69 13.00 NEC Display Solutions of America, Inc. Table Top Stand ST-4020 0.83 LCD4020-2 Rev 1.0 Page 6 of 9... -
Page 7: Optional Speaker Dimensions
NEC Display Solutions of America, Inc. LCD4020-2 Installation Guide 40” LCD Display Rev 1.0 Optional Speaker Dimensions (SP4020-4620) Optional Speakers SP4020-4620 0.79 INPUT TERMINAL www.necdisplay.com LCD4020-2 Page 7 of 9... -
Page 8: Dimensions With Optional Wall Mount
NEC Display Solutions of America, Inc. LCD4020-2 Installation Guide 40” LCD Display Rev 1.0 Dimensions with Optional Wall Mount Kit (WMK3260-L) www.necdisplay.com LCD4020-2 Page 8 of 9... -
Page 9: Control Codes
SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE FILM MODE AUTO NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length:...