Table of Contents
Advertisement
Available languages
Available languages
Other useful features
Setting when using external
devices
Input source settings
Option
Input Select
For setting the signal type of external equipment.
Item
INPUT1: Y/C, CVBS, RGB
INPUT2: Y/C, CVBS, RGB
INPUT3: Auto, S-VIDEO, VIDEO
NOTE
•
If no (colour) image displays, try changing to another
signal type.
•
Check the operation manual of the external equipment for
the signal type.
•
When the signal type is set to "Auto", the input terminal
where a cable is connected is automatically selected.
Setup
Input Label
You can label each input source with a custom
description.
1
Press INPUT1–8 on the remote control unit or
b on the TV to select the desired input source.
2
Go to "HOME MENU" > "Setup" > "Input Label".
3
Press a/b/c/d to select each character of
the new name for the input source, and then
press ENTER.
DVD
A
B
C
D
K
L
M
N
U
V
W
X
0 1 2 3 4 5 6 7 8 9
4
Repeat until the label is fully spelt out.
NOTE
•
The label can be six characters or less.
•
When you want to set an input source label of less than six
characters, select "END" to set the name.
•
You cannot change labels if the input source is "TV".
Downloaded From TV-Manual.com Manuals
38
E
F
G
H
I
J
CLEAR
O
P
Q
R
S
T
BACK
Y
Z
+
–
.
_
END
Skipping specified inputs
Setup
Input Skip
This setting allows you to skip the SCART, HDMI or
RGB input on the Input Source Selection operation.
INPUT1 (SCART)
INPUT2 (SCART)
INPUT4 (HDMI)
INPUT5 (HDMI)
INPUT6 (HDMI)
INPUT7 (RGB)
Colour system settings
Option
Colour System
You can change the colour system to one that is
compatible with the image on the screen.
NOTE
•
The factory preset value is "Auto".
•
If "Auto" is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g. "PAL", "SECAM").
Additional features
Setup
Standby Mode
You can reduce the TV's start-up time after turning on
the power with the remote control unit.
Item
Mode1: The TV quickly starts up from standby. 30 W or
more of power consumption is required during standby.
Mode2: Power consumption is small during standby.
No
Y es
Advertisement
Chapters
Table of Contents
