Table of Contents
Advertisement
3
Making copies
Copy settings
When you want to quickly change the copy
settings for the next copy, use the temporary
COPY keys. You can change multiple
settings.
The machine returns to its default settings
one minute after copying.
To change a setting, press a temporary
COPY key or Duplex and then press a or b
and d or c to scroll through the COPY
settings. When the setting you want is
highlighted, press OK.
When you have finished changing settings,
press Start to begin copying.
Stop copying
To stop copying, press Stop/Exit.
Enlarging or reducing the
3
image copied
You can choose the following enlargement or
reduction ratios:
Press
3
* The factory setting is shown in Bold with an
asterisk.
1
Custom(25-400%) allows you to enter a ratio from
25% to 400% in 1% increments.
2
Auto sets the machine to calculate the reduction
ratio that best fits the size of paper. Auto is only
available when using the ADF.
To enlarge or reduce the next copy follow the
instructions below:
a
Load your document.
b
Use the numeric keys to enter the
number of copies (up to 99).
c
Press Enlarge/Reduce, then press c.
100%*
97% LTRiA4
94% A4iLTR
91% Full Page
85% LTRiEXE
83% LGLiA4
78% LGLiLTR
70% A4iA5
50%
1
Custom(25-400%)
2
Auto
200%
141% A5iA4
104% EXEiLTR
13
3
3
3
Advertisement
Table of Contents
