External Monitor - Toshiba C70-C User Manual
Hide thumbs
Also See for C70-C:
- User manual (170 pages) ,
- User manual (181 pages) ,
- User manual (125 pages)
Table of Contents
Advertisement
External monitor
Also refer to
your monitor for further information.
Problem
Monitor does not
turn on
No display
Display error occurs
LAN
Problem
Cannot access LAN
User's Manual
Operating
Basics, and to the documentation supplied with
Procedure
After confirming that the monitor's power switch is
on, check the connections to make sure that the
power cord/adaptor is firmly connected to the
monitor and to a working power outlet.
Try adjusting the contrast and brightness controls
on the external monitor.
Press the function key in order to change the
display priority and ensure that it is not set for the
internal display only.
Check to see if the external monitor is connected.
When the external monitor is set as the primary
display device in extended desktop mode, it does
not display when the computer wakes up from
Sleep Mode if the external monitor has been
disconnected while in Sleep Mode.
To keep this from happening, do not disconnect
the external monitor while the computer is in Sleep
or Hibernation Mode.
Remember to turn off the computer before
disconnecting the external monitor.
When the display panel and an external monitor
are set to clone mode and they are turned off by
the timer, the display panel or the external monitor
might not display when turned on again.
If this occurs, press the function key to reset the
display panel and external monitor to clone mode.
Check that the cable connecting the external
monitor to the computer is firmly attached.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Procedure
Check for a firm cable connection between the
LAN jack and the LAN hub.
6-13
Hide quick links:
Advertisement
Table of Contents
